GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1756-PB75R |
Series: | ControlLogix |
Description:
Part number 1756-PB75R is a ControlLogix redundant power supply module that was designed and manufactured by Allen Bradley. This module requires an input voltage of 24 volts DC. This device has an isolation voltage of 250 volts. The operating temperature for this device should remain within a range of 0 to 60 degrees Celsius. This device has an open-type enclosure and has physical dimensions that measure 140 mm x 112 mm x 145 mm.
This unit does not ship with terminal blocks. Terminal blocks may be present in photographs for illustrative purposes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1756-PB75R is a ControlLogix redundant power supply, which requires 24 volts DC. The 1756-PB75R allows for automated chassis load sharing between overpowering power suppliers. This power supply has a status indicator that displays the current condition of the visual functioning. This power supply has an operating vibration of 2 G at 10 to 500 Hz. This power supply's operating and non-operating shocks are 30 G and 50 G, respectively. The 1756-PB75R's measurements are roughly 140 millimeters x 112 millimeters x 145 millimeters (5.51 inches x 4.41 inches x 5.71 inches). This power supply weighs approximately 0.95 kg (2.10 lb). The Allen-Bradley 1756-PB75R connects the power supply to the 1756-PSCA2 housing adapter through the 1756-CPR2 wire. An electrical arc may develop if you connect or unplug the 1756-CPR2 cable while the backplane's power supply is turned on. This may result in an explosion in a dangerous position. Repeated electrical retractions wear down the contacts on the module and its mating connection. This power supply's voltage input connectors are auto-sensing. While the 1756-PB75R is in non-redundant mode, you may swap a robust power supply with another.
This power supply is especially utilized to reduce the risk of system downtime caused by power supply error because when coupled with a redundant partner, this power supply unit creates a hot-standby assembly in which one unit functions as stand-by and one unit operates as active power source. In the case of a module failure, a unit immediately takes over. The 1756-PA75R also includes an alarm notification power of 90 volts DC for ATEX/IECEx. It also has a continuous isolation voltage of 250 volts.
Question: Does Automation Stop offer repairs on the 1756-PB75R?
Answer: Yes. We offer repairs for the 1756-PB75R and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1756-PB75R?
Answer: If you buy the 1756-PB75R through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1756-PB75R online?
Answer: Yes. Automation Stop sells the 1756-PB75R online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1756-PB75R?
Answer: The 1756-PB75R is made by Allen Bradley - PLC.
Question: What type of product is the 1756-PB75R?
Answer: The 1756-PB75R is part of the ControlLogix series.
For additional information about 1756-PB75R check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1756-PB75R.
Revision Part # | Also Known As | Availability |
---|---|---|
1756-PB75R/A | 1756-PB75R Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.