GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1756-RM2

✓ In Stock

1756-RM2 Image 1 thumbnail
1756-RM2 Image 2 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1756-RM2
Series: ControlLogix
UPC: 884951800434

Description:

The Allen-Bradley 1756-RM2 ControlLogix redundancy module provides higher cross load speeds with ControlLogix 5570 and 5560 controllers to build redundant systems. This Allen-Bradley 1756-RM2 can be supplied from 1756-PA75R, 1756-PB75R or 1756-PSCA2 power supplies with a current draw of 1.16 amperes and power consumption of 6 watts. This Allen-Bradley single-slot 1756-RM2 module can be installed on a ControlLogix-XT chassis. This ControlLogix redundancy module can operate at a temperature range of 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) and weighs approximately 0.29 kilograms (0.64 pounds) while shipping.


This unit does not ship with terminal blocks. Terminal blocks may be present in photographs for illustrative purposes.


Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$4,741.00

Available: 2

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$2,746.00

Available: 6

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$2,197.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1756-RM2? We can help!

Request a Quote

Key Features:

  • has 32-140 fahrenheit (0-60 celsius) operating temperature

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 1756-RM2 ControlLogix redundancy module provides higher cross load speeds with ControlLogix 5570 and 5560 controllers to build redundant systems. This Allen-Bradley 1756-RM2 can be supplied from 1756-PA75R, 1756-PB75R or 1756-PSCA2 power supplies with a current draw of 1.16 amperes and power consumption of 6 watts. This Allen-Bradley 1756-RM2 ControlLogix redundancy module can be connected to the redundant chassis pair through a fibre-optic wire that offers a maximum optical power of 9.5 decibels. The Allen-Bradley 1756-RM2 module can be employed in several applications mainly in the industrial field. The 1756-RM2 module can be mounted and installed easily on a ControlLogix-XT chassis at any place using a single slot. The Allen-Bradley 1756-RM2 ControlLogix redundancy module dissipates an electrical power of 6 watts and a thermal power of 21 british thermal units per hour.

This Allen-Bradley 1756 ControlLogix redundancy module uses 1756-RMCx wires. This ControlLogix redundancy module offers to a redundant system a high data rate speed of 1000 megabits per second when using two 1756-RM2 modules. The 1756-RM2 ControlLogix redundancy module includes a status display of 4 characters to show the diagnostic information, a OK status LED indicator that indicates the module state and CH1 and CH2 status LED indicators that simplify the maintenance and troubleshooting process. The 1756-RM2 ControlLogix redundancy module is intended for use in a mainly industrial environment that is clean and dry. This Allen-Bradley ControlLogix redundancy module works properly at 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications and weighs approximately 0.29 kilograms (0.64 pounds) while shipping.

Technical Specifications

Brand Allen-Bradley / Rockwell Automation
Series 1756 ControlLogix redundancy module
Part Number 1756-RM2
Current draw @ 5.1V DC 1.16 A
Current draw @ 24V DC 3.4 mA
Power dissipation 6 W
Thermal dissipation 21 BTU/hr
Connector cables 1756-RMC1, 1 m (3.28 ft), 1756-RMC3, 3 m (9.84 ft), 1756-RMC10, 10 m (32.81 ft)
Slot width 1
Chassis 1756-A4, 1756-A7, 1756-A10, 1756-A13, 1756-A17
Module location Chassis-based, any slot
Controller families, supported ControlLogix 5560, ControlLogix 5570
Power supply, standard 1756-PA72, 1756-PA75, 1756-PB72, 1756-PB75
Power supply, redundant 1756-PA75R, 1756-PB75R, 1756-PSCA2
Weight, approx. 0.29 kg (0.64 lb)
Mounting ControlLogix-XT chassis, single-slot module
Operating temperature range 0 °C...60 °C (32 °F...140 °F)
Relative humidity 5…95% noncondensing
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1756-RM2?

Answer: Yes. We offer repairs for the 1756-RM2 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1756-RM2?

Answer: If you buy the 1756-RM2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1756-RM2 online?

Answer: Yes. Automation Stop sells the 1756-RM2 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1756-RM2?

Answer: The 1756-RM2 is made by Allen Bradley - PLC.


Question: What type of product is the 1756-RM2?

Answer: The 1756-RM2 is part of the ControlLogix series.


Question: What Brand does the Allen-Bradley 1756-RM2 have?

Answer: The Allen-Bradley 1756-RM2 has a Allen Bradley (AB) / Rockwell Automation Brand.


Question: What Chassis does the Allen Bradley 1756-RM2 have?

Answer: The Allen Bradley 1756-RM2 has a Chassis of 1756-A4, 1756-A7, 1756-A10, 1756-A13, 1756-A17.


Question: What is the Connector cables of the 1756-RM2?

Answer: The Rockwell-Automation 1756-RM2 has a Connector cables of 1756-RMC1, 1 m (3.28 ft), 1756-RMC3, 3 m (9.84 ft), 1756-RMC10, 10 m (32.81 ft).


Question: What is the Controller families, supported of the 1756-RM2?

Answer: The Allen Bradley 1756-RM2 has a Controller families, supported of ControlLogix 5560, ControlLogix 5570.


Question: What is the Current draw @ 24 volts DC of the 1756-RM2?

Answer: The Current draw @ 24 volts DC (direct current) of the 1756-RM2 is 3.4 mA.


Question: What is the Current draw @ 5.1 volts direct current of the 1756-RM2?

Answer: The Current draw @ 5.1 volts DC (direct current) of the 1756-RM2 is 1.16 A.


Question: What Module location is included with the 1756-RM2?

Answer: The 1756-RM2 has a Chassis-based, any slot Module location.


Question: What Mounting is included with the Allen-Bradley 1756-RM2?

Answer: The Allen-Bradley 1756-RM2 has a ControlLogix-XT chassis, single-slot module Mounting.


Question: What is the Operating temperature range of the 1756-RM2?

Answer: The Operating temperature range of the 1756-RM2 is 0 °C...60 °C (32 °F...140 °F) .


Question: What component Number does the Rockwell-Automation 1756-RM2 have?

Answer: The component Number of the 1756-RM2 is 1756-RM2.


Question: What Power dissipation does the 1756-RM2 have?

Answer: The Power dissipation of the Allen Bradley-Rockwell Automation 1756-RM2 is 6 W.


Question: What is the power supply unit, redundant of the Rockwell Automation 1756-RM2?

Answer: The power supply unit, redundant of the Rockwell Automation 1756-RM2 is 1756-PA75R, 1756-PB75R, 1756-PSCA2.


Question: What is the power supply component, standard of the 1756-RM2?

Answer: The Allen-Bradley 1756-RM2 has a power supply unit, standard of 1756-PA72, 1756-PA75, 1756-PB72, 1756-PB75.


Question: What is the Relative humidity of the 1756-RM2?

Answer: The 1756-RM2 has a Relative humidity of 5…95% noncondensing.


Question: What is the Slot width of the 1756-RM2?

Answer: The Rockwell-Automation 1756-RM2 has a Slot width of 1.


Question: What is the Thermal dissipation of the 1756-RM2?

Answer: The Thermal dissipation of the 1756-RM2 is 21 BTU/hr.


Question: What Weight, approx. does the 1756-RM2 have?

Answer: The 1756-RM2 has a Weight, approx. of 0.29 kg (0.64 lb).


Series information for 1756-RM2

For additional information about 1756-RM2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1756-RM2.

Revision Part # Also Known As Availability
1756-RM2/A 1756-RM2 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 175G-RM2
  • 17S6-RM2
  • 17SG-RM2
  • I756-RM2
  • I75G-RM2
  • I7S6-RM2
  • I7SG-RM2

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP