GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1771-P4R |
Series: | PLC 5 |
UPC: | 10612598003577 |
Description:
The Allen-Bradley 1771-P4R is compatible with the PLC series. A 97 to 132 volts AC input is required for the module. It has a single slot. The module is from the series line of SER-C, and the required NOM input voltage for the module is 120 volts AC. It integrates well with the an of PLC control systems. For a two-unit system, the 1771-P4R is meant can generate a maximum output power of 8 amperes. For three-unit systems, the maximum power is 14 amperes. Additionally, for four-unit systems, the maximum power is 20 amperes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1771-P4R belongs to the PLC 5 line of products from Allen Bradley. It is part of the 1771 chassis from Allen Bradley. It can help with cutting down machine downtime and boosting machine availability. When operational, this device will also help avoid power interruptions and complete shutdown scenarios. In alternating current, the input power range required by this unit is 97 to 132 volts. At 8 amperes, this unit can generate a maximum output power of 5 volts direct current.
The 1771-P4R features a N+1 design. For a two-unit system, this module can generate 8 amperes of power. However, it must be kept in an environment below 60 degrees Celsius. For four-unit systems, the power is 20 amperes, and for three-unit systems, the power is 14 amperes. The maximum power dissipation rate for this module is 16 watts. The thermal dissipation rating for this industrial unit is 47.8 BTU/hr. When operating at 5 volts direct current (DC), it can generate 300 milliamperes of backplane current.
This unit can operate at a maximum of 1000 volts isolation power for 1 second. The wires that can be used with this industrial unit must have 3/64-inch insulation thickness, and 2.5 mm² copper wire size. It comes with a redundancy cable. It comes with branch protection at 15 amperes. It comes with an embedded Bussman MDL 1.5 fuse. It comes with the following industrial compliance certifications: UL, CSA, and NEMA. The 1771-P4R supplies the required power supply, as well as an extra layer of protection. It only requires a single slot on the 1771 chassis.
Question: Does Automation Stop offer repairs on the 1771-P4R?
Answer: Yes. We offer repairs for the 1771-P4R and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1771-P4R?
Answer: If you buy the 1771-P4R through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1771-P4R online?
Answer: Yes. Automation Stop sells the 1771-P4R online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1771-P4R?
Answer: The 1771-P4R is made by Allen Bradley - PLC.
Question: What type of product is the 1771-P4R?
Answer: The 1771-P4R is part of the PLC 5 series.
Question: What voltage does the Allen Bradley - PLC 1771-P4R have?
Answer: The Allen Bradley - PLC 1771-P4R includes a voltage of 120.
Question: What amperage does the 1771-P4R have?
Answer: The 1771-P4R has a amperage of 8.
For additional information about 1771-P4R check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-P4R.
Revision Part # | Also Known As | Availability |
---|---|---|
1771-P4R/A | 1771-P4R Ser A, Series A, Rev A | Request a Quote |
1771-P4R/B | 1771-P4R Ser B, Series B, Rev B | Request a Quote |
1771-P4R/C | 1771-P4R Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.