GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1771-PS7

✓ In Stock

Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1771-PS7
Series: PLC 5

Description:

The 1771-PS7 is an AC power supply module created, designed, and distributed by Allen Bradley for the PLC 5 Series. The supported input voltage range of this Allen Bradley module is 97 to 132 volts of Alternating Current or 195 to 264 volts of Alternating Current. Backplane output for this power supply is +5 volts DC at 16 amperes of current. It can either be mounted with the I/O chassis or separately.


Key Features:

  • is a power supply
  • has 4.5 x 12.4 x 6.3 in (115 x 317 x 160 mm) dimensions

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$1,881.00

Available: 1

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$665.00

Available: 29

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$532.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1771-PS7? We can help!

Request a Quote

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1771-PS7 is an AC Auxiliary power supply unit designed, created, and distributed by Allen Bradley. This device is also a part of the 1771 family of power supply modules, and it was built by Allen Bradley to be compatible with both the PLC-5 series of programmable controllers and the 1771 control systems. This unit has an input voltage range of ninety-seven (97) to one hundred and thirty-two (132) volts alternating current (AC) and one hundred and ninety-five (195) to two hundred and sixty-four (264) volts alternating current (AC). Furthermore, the frequency range of this module is forty-seven (47) to sixty-three (63) hertz. The nominal input current is specified at 2 amperes at 120 volts of Alternating Current and 1 ampere at a voltage of 220 volts of Alternating Current. The backplane output for the 1771-PS7 is +5 volts of Direct Current at 16 amperes of current. Backplane power for this unit is supplied with the use of a D-sub connector. To avoid power supply overload, the overall system power should be limited to 100 watts, the user power to 65 watts, and the backplane power to 80 watts. The 1771-PS7 power supply can be installed independently or in conjunction with the I/O chassis. The device is intended to be installed above or adjacent to the chassis, allowing for effective convection cooling of both the power supply and the I/O chassis. To achieve a stable attachment, the power supply receiving holes must be aligned with the taper pins of the mounting plate.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1771-PS7?

Answer: Yes. We offer repairs for the 1771-PS7 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1771-PS7?

Answer: If you buy the 1771-PS7 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1771-PS7 online?

Answer: Yes. Automation Stop sells the 1771-PS7 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1771-PS7?

Answer: The 1771-PS7 is made by Allen Bradley - PLC.


Question: What type of product is the 1771-PS7?

Answer: The 1771-PS7 is part of the PLC 5 series.


Series information for 1771-PS7

For additional information about 1771-PS7 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-PS7.

Revision Part # Also Known As Availability
1771-PS7/A 1771-PS7 Ser A, Series A, Rev A Request a Quote
1771-PS7/B 1771-PS7 Ser B, Series B, Rev B Request a Quote
1771-PS7/C 1771-PS7 Ser C, Series C, Rev C Request a Quote

Common Misspellings:

  • 1771-P57
  • 177I-PS7
  • 177I-P57
  • I771-PS7
  • I771-P57
  • I77I-PS7
  • I77I-P57

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP