GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1771-WI

✓ In Stock

Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1771-WI
Series: PLC 5

Description:

Designed and manufactured by the company known as Allen Bradley / Rockwell Automation, product number 1771-WI is a thermocouple wiring arm that belongs to the PLC-5 series of products. This device is equipped with 8 inputs and 18 outputs. The optimal screw torque for this device is rated at 7 to 9 lb-in. This wiring arm weighs approximately 0.3 pounds, or the equivalent of 0.1 kilograms. The operating temperature of this device should range from 0 to 60 degrees Celsius.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$63.00

Available: 2

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$51.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1771-WI? We can help!

Request a Quote

Key Features:

  • is a wiring arm
  • features dimensions of 4.5 x 12.4 x 6.3 in (115 x 317 x 160 mm)

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

This 1771-WI PLC-5 series thermocouple wiring arm is made by Allen-Bradley. A high-resolution thermocouple / millivolt I/O module is equipped to this wiring arm. This device includes a total of 18 ports and is located on the bottom of the 1771 frame. These ports provide connections for the outputs and inputs of the modules to which they are linked. This module has an I/O connection capability of up to 8 modules. The 1771-WI connects the chassis wire to the high-resolution thermocouple I/O units in a simple and practical manner. It is made of a 14-gauge stranded wire with a 3/64-inch-thick insulation. These serve as base conductors, and they have a gold conformal coating.

The 1771-WI is not fused and is utilized in high-resolution thermocouple applications. It features a 7- to 9-pound-per-inch optimal field-arm screw torque and weighs around 0.3 pounds, or the equivalent of 0.1 kilograms. Plant cabling and 1771 I/O devices may be easily and flexibly connected using wire arms. The built-in I/O chassis clamp may be swung away for easy access to the modules. A module-locking tab included inside the module which helps to ensure connection integrity. Entering wires may be fastened directly to the arm or spade lugged. The 1771-WI offers fuse shielding for each module output, allowing fuse replacement without removing the module from the chassis. During installation, users may change fuses by removing a single fuse holder without removing the output module. This device should be operated in an environment where the temperature ranges from 0 degrees Celsius to 60 degrees Celsius. 

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1771-WI?

Answer: Yes. We offer repairs for the 1771-WI and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1771-WI?

Answer: If you buy the 1771-WI through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1771-WI online?

Answer: Yes. Automation Stop sells the 1771-WI online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1771-WI?

Answer: The 1771-WI is made by Allen Bradley - PLC.


Question: What type of product is the 1771-WI?

Answer: The 1771-WI is part of the PLC 5 series.


Series information for 1771-WI

For additional information about 1771-WI check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-WI.

Revision Part # Also Known As Availability
1771-WI/A 1771-WI Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1771-W1
  • 177I-WI
  • 177I-W1
  • I771-WI
  • I771-W1
  • I77I-WI
  • I77I-W1

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP