It is a current limiting molded case circuit breaker that is made by Rockwell Automation, which is also known as 885630141701, 140U-D6D3-C15. It has a D frame and up to 15 Amps current limiting capacity. There are three poles in it. Its degree of protection is IP2X. 6A is its rated current value. It is both chemically and magnetically attached. The MPN for this item is 140U-D6D3-C15, and the UNSPSC and REPN numbers are 39121616 and 363792, respectively. It does not have a DIN rail mounting system; however, it does have a top hat mounting system. It has zero auxiliary contacts that serve as change-over contacts and zero auxiliary links that serve as usually closed contacts. There are no auxiliary contacts that serve as typically open connections. The position of connection for a main current circuit is the front side of the breaker. It has a rated permanent current Iu value of 15 Amps. It has 65 kilo Amps of rated short-circuit breaking capability. Its voltage ratings are between 690 volts. This molded case circuit breaker is controlled by the toggle lever. This product has a 2- and 3-pole configuration. It has a current interrupting rate of 100 kilo amps. This molded case breaker does not have any kind of current limitations because the maximum allowable fault current at the breaker is zero. Its dimension includes a width of 45 mm, a height of 102 mm and a depth of 85 mm and these dimensions save the area on the plane. The frequency of this product is 60 Hz. This device is used for house-building purposes. Allen Bradley’s circuit breaker is manufactured by Rockwell Automation and is also known as 885630141701, 140U-D6D3-C15. It has a D-frame structure. It is molded case high current restricting motor protection circuit breaker. It has three poles and is controlled by a toggle. It is thermally as well as magnetically fixed. Its degree of protection is IP2X. 6A is its rated current. Its width is 45mm, height is 102mm and depth is 85mm.