GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 150-A35JB |
Series: | SMC-2 |
Description:
The Allen-Bradley 150-A35JB is a non-combination solid-state controller by Allen-Bradley/Rockwell Automation. To operate, it requires a 400 to 480 VAC input voltage. It comes with an IP54/NEMA Type 12 enclosure. The controller has a current rating of 35 amperes and an output rating go 22 kW. The 150-A35JB has an output power rating of 25 horsepower. This solid-state controller comes embedded with a keypad that can be used to register operator inputs.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
To ensure a full-fledged ergonomic experience, this solid-state controller unit comes with a keyboard that arranges the keys in a useful and effective sequence. The keyboard is optimized for the best keyboard strokes. Thanks to special wiring and configuration, the Allen-Bradley 150-A35JB controller is protected against mechanical damage that may arise from the current supply at full voltage. Also, this controller unit is protected against any damage from the initiation of the alternate current Induction motors. The cumulative lifespan of the induction motors helps to increase the total life span of the actual machine. Furthermore, the Allen-Bradley 150-A35JB is protected against disturbances and damages from a sudden rise in the inrush currents, thus reducing downtime significantly. Thanks to the in-built diagnostic feature, users can identify errors and technical issues long before they arise. To increase the reliability and functionality of this controller unit, it comes with dedicated stop and start buttons. The built-in short-circuit protection and advanced power wiring with protecting the induction motors in case it overheats. It can take control of the motor full-load current using the adjustable load-trip setting. The Allen-Bradley 150-A35JB can be connected to many different modules for communication purposes using the built-in serial interface port. Thanks to the built-in keyboard, standard programming on this module is pretty easy. The programming keyboard is located on the front part of this solid-state controller. Furthermore, the Allen-Bradley 150-A35JB also comes with dedicated ports for DeviceNet, ControlNet, Ethernet, and Profibus modules. It features internal electronic motor overload protection.
Question: Does Automation Stop offer repairs on the 150-A35JB?
Answer: Yes. We offer repairs for the 150-A35JB and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 150-A35JB?
Answer: If you buy the 150-A35JB through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 150-A35JB online?
Answer: Yes. Automation Stop sells the 150-A35JB online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 150-A35JB?
Answer: The 150-A35JB is made by Allen Bradley - Miscellaneous.
Question: What type of product is the 150-A35JB?
Answer: The 150-A35JB is part of the SMC-2 series.
For additional information about 150-A35JB check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 150-A35JB.
Revision Part # | Also Known As | Availability |
---|---|---|
150-A35JB/A | 150-A35JB Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.