GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 440G-MT47037 |
Series: | 440G |
Description:
It is a power to unlock solenoid safety interlock switch. This is an Allen Bradley product from the 440G series. This unit comes with the GD2 type standard actuator and an LED display for the switch operations. It contains an IP67 protective degree and has 3 N.C safety contacts and 1 N.O contact. Its sensor length is 199 mm. It also has a greater holding stability thanks to its holding force of 1500N, 337 lbs.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 440G-MT47037 is a guard locking Switch by Allen Bradley/ Rockwell Automation. This product is from the 440G Solenoid product line. This switch has a solenoid voltage rating of 24V AC/DC. It has three normally closed (N.C) safety contacts and one normally open (N.O) contact. For the conduit entry, this module is supplied with the M20 conduit. This switch comes with a 199 mm sensor in height and 40 mm in length and the sensing width is 46.75 mm. The housing material used for this unit is metal making it durable in terms of its build. It has 0 number of contacts as change over contact. Its AC-15, 125 V operation current is 6 amps, 3 amps for AC-15, 230 V, and 2 amps for DC-13, 24 V. It has a cable entrance metrical electric plug connection, and it uses the quiescent current principle for guard locking. This switch has -25 to 60 °C an ambient temperature rating. And its clamping force is 1600 N and for the coating housing, this unit comes powder coated. Apart from that, it does not contain any explosion safety category for dust and gas. Nevertheless, it has a protective enclosure rating of IP67 which is also suitable for outside usage and can shield this unit from dust, sand, and other solid objects. But, it should not contact with contaminants and its working and storage temperature ratings should not exceed the desired level for its safety. Similarly, its maintenance and configuration should also adhere to the guidelines instructed by the manufacturers.
Question: Does Automation Stop offer repairs on the 440G-MT47037?
Answer: Yes. We offer repairs for the 440G-MT47037 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 440G-MT47037?
Answer: If you buy the 440G-MT47037 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 440G-MT47037 online?
Answer: Yes. Automation Stop sells the 440G-MT47037 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 440G-MT47037?
Answer: The 440G-MT47037 is made by Allen Bradley - Miscellaneous.
For additional information about 440G-MT47037 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 440G-MT47037.
Revision Part # | Also Known As | Availability |
---|---|---|
440G-MT47037/A | 440G-MT47037 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.