GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800Z-GP2Q4 |
Series: | 800Z |
Description:
Product number 800Z-GP2Q4 is a general purpose Zero Force touch button that was produced by Allen Bradley. It has a digital signal processing and sensor surface, fitting person?s hand and able to be operated with or without gloves. It is a 24-volt DC device with transistor output. This device has a current draw of 100 milliamperes at 24 volts DC, which is equal to 2.23 watts with no external load.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 800Z-GP2Q4 is a touch button device, manufactured by Allen Bradley. It is part of the Bulletin 800Z series of specialty push button products. This touch button is a general purpose button. They are known for unique product sensitivity that distinguishes person’s hand and foreign substances. This is due to the sensor surface that is blended with digital signal processing (DSP) architecture. The products also are called Zero Force buttons as they do require zero force to operate. They are designed to fit the shape of the hand, being able to operate with or without gloves. The 800Z-GP2Q4 touch button has an input of 10 to 30 volts DC and a transistor output of PNP sourcing. It has a mounting hole size of 22.5 millimeters. Its electrical connection is a 4 pin QD type. The device on delay is equal to 76 milliseconds maximum and off delay of 60 milliseconds maximum. It has a current draw of 100 milliamperes at 24 volts DC, which is equal to 2.23 watts when no external load is applied.
This unit, when tested at 10 G, has a rated vibration endurance of 1.52 mm of displacement. Its mechanical shock at 100 G proved mechanical durability. The degree of protection for this device is a type 4/4X/13 enclosure, an IP rating of IP66, and 1200 psi washdown. This device has physical dimensions that measure 48.3 millimeters x 69.9 millimeters x 40.9 millimeters, or 1.9 inches x 2.74 inches x 1.61 inches. This device has an operating temperature range of -25 to +55 degrees Celsius.
Question: Does Automation Stop offer repairs on the 800Z-GP2Q4?
Answer: Yes. We offer repairs for the 800Z-GP2Q4 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800Z-GP2Q4?
Answer: If you buy the 800Z-GP2Q4 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800Z-GP2Q4 online?
Answer: Yes. Automation Stop sells the 800Z-GP2Q4 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800Z-GP2Q4?
Answer: The 800Z-GP2Q4 is made by Allen Bradley - Miscellaneous.
For additional information about 800Z-GP2Q4 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800Z-GP2Q4.
Revision Part # | Also Known As | Availability |
---|---|---|
800Z-GP2Q4/A | 800Z-GP2Q4 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.