GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 873M-D18PO300-D4 |
Series: | 873M |
Description:
The 873M-D18PO300-D4 ultrasonic proximity sensor manufactured by Allen Bradley has a cylindrical structure with a diameter of 18 millimeters. For operation, it needs 10 to 30 VDC supply. Its output mode is PNP normally open/normal closed. This proximity sensor module has a sensing distance of 30 mm to 300mm. It features a micro quick-disconnect connection. It operates at a frequency of 13 hertz. It requires an input current range of 4 milliamperes to 20 milliamperes, and the supply voltage varies from 0 to 10 volts. In addition, the maximum output current is 200 milliamperes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 873M-D18PO300-D4 proximity sensor is a Bulletin 873M multipurpose component. This module has an 18 mm diameter and is cylindrical. It contains bright LEDs (light emitting diodes) that show the output status. This sensing device has a maximum functioning distance of 300 mm. Nickel-plated brass is used to make the enclosure. The connection medium for this ultrasonic proximity sensor is detached connection micro M12, and it is also female style, straight, 4-pin, PVC form material that is painted yellow and is unshielded. It also features the same Micro QD (DC), TC connection and termination as well. This sensing device complies with C-TICK and CCC standards.
For both discrete and analog models, its window teaching enables sensing range to be configured inside a user-taught sensing region. Superior background suppression is possible for the user. This 873M product line has faster switching rates than other ultrasonic sensors in the portfolio and an IP67 grade for use in severe environments. This series includes a discrete output for on/off activities as well as analog outputs for distance feedback. The user can check power and output from any direction, decreasing the amount of time necessary for installation and troubleshooting. It is also possible to teach the sensor utilizing a simple four-step remote to teach the procedure using an extra programming cable. In addition to being good for normal packing and assembly applications, these sensors are also effective for detecting a wide range of targets that may be difficult for photoelectric sensors to detect, such as transparent, glossy, or non-reflective items.
Question: Does Automation Stop offer repairs on the 873M-D18PO300-D4?
Answer: Yes. We offer repairs for the 873M-D18PO300-D4 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 873M-D18PO300-D4?
Answer: If you buy the 873M-D18PO300-D4 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 873M-D18PO300-D4 online?
Answer: Yes. Automation Stop sells the 873M-D18PO300-D4 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 873M-D18PO300-D4?
Answer: The 873M-D18PO300-D4 is made by Allen Bradley - Miscellaneous.
For additional information about 873M-D18PO300-D4 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 873M-D18PO300-D4.
Revision Part # | Also Known As | Availability |
---|---|---|
873M-D18PO300-D4/A | 873M-D18PO300-D4 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.