GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 700-HN104 |
Series: | Allen Bradley 700 |
Description:
Part number 700-HN104 is a miniature screw terminal socket. This device was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This product has fourteen (14) blades. This device may be paired with surge suppressors, LEDs, and much more. This Allen Bradley device is capable of being mounted via a panel mount or a DIN rail. It has physical dimensions that measure 76 mm x 27 mm x 60.9 mm.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 700-HN104 is a type of miniature terminal socket that comes with 14 blades. It is specially designed to work with relay modules from the Bulletin 700-SC line of products. This screw terminal socket comes with both a contact separator and a coil separator. This miniature socket can be easily plugged into optional plugs in any industrial setting. It can be paired with surge suppressors, LEDs, and all sorts of timing modules. The 700-HN104 comes with additional plug-in modules. Furthermore, it also come with guarded screw terminals.
The Allen Bradley 700-HN104 has physical dimensions that measure 76 millimeters x 27 millimeters x 60.9 millimeters (height x width x depth). The Allen Bradley 700-HN104 supports both DPDT and 4PDT contact forms. It uses both AgNi, AgNi + Gold as its contact material. The coil voltage that this device supports include 6 volts AC, 12 volts AC, 24 volts AC, 120 volts AC, and 240 volts AC. On the other hand, for direct current voltages, the supported coil voltages of this device include 6 volts DC, 12 volts DC, 24 volts DC, 48 volts DC, and 110 volts DC. It has a electrical service life of one hundred thousand (100,000) minutes. This device should be operated in an environment where the temperature remains within a range of -30 to +55 degrees Celsius, or the equivalent range of -22 to +131 degrees Fahrenheit. When storing this device, however, the temperature range of the surrounding environment should range from -55 to +85 degrees Celsius, or -67 to +185 degrees Fahrenheit.
Question: Does Automation Stop offer repairs on the 700-HN104?
Answer: Yes. We offer repairs for the 700-HN104 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 700-HN104?
Answer: If you buy the 700-HN104 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 700-HN104 online?
Answer: Yes. Automation Stop sells the 700-HN104 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 700-HN104?
Answer: The 700-HN104 is made by Allen Bradley - Miscellaneous.
For additional information about 700-HN104 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 700-HN104.
Revision Part # | Also Known As | Availability |
---|---|---|
700-HN104/A | 700-HN104 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.