GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800T-J42 |
Series: | Allen Bradley 800T |
Description:
The 800T-J42 is a type three position selector switch with a diameter that measures 30 millimeters. It has no finger safeguards and has an estimated shipping weight of 0.57 kilograms. It can operate under vibrations that lies between 10 to 2000 hertz and shock waves up to 100 G. For maximum protection of the electrical components, the enclosure is metal with a rating of type (NEMA) 4/13. The key removal is center, and the suitable temperature of operations lies between -40 and 55 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 800T-J42 is a selector switch with a diameter of 30 millimeters. Its key removal is from the center. It has no guard that safeguards the operator's fingers from being pinched or worse. Therefore, users should be extremely cautious when operating this device. It has an estimated shipping weight of 0.57 kilograms and can withstand vibrations that ranges from 10 hertz to 2000 hertz. It can also withstand shock up to 100 G. The dielectric strength for the selector switch is rated at 2200 volts for one minute. The wire applicable to the device is 18 to 14 American Wire Gauge (AWG). For proper storage of the selector switch, it is necessary that the temperatures be well between negative (-) 40 and positive (+) 85 degrees Celsius, whereas when the device is in operation, the temperature should be maintained between negative (-) 40 and positive (+) 55 degrees Celsius. It is important to note that while operating below freezing point, the atmosphere should be dry, ensuring that moisture and liquid is absent. It operates under a relative humidity that is between 50 to 95 percent within the temperature ranging from 25 to 60 degrees Celsius. The terminal screw torque is rated as 6.8 lb-in. The enclosure is watertight, therefore offering maximum protection against adverse conditions when used outdoors. It also offers protection from corrosive environment and infiltration of particles such as dust, flying fibers, and much more as the enclosure is of type (NEMA) 4/13. The outer part is made of metal.
Question: Does Automation Stop offer repairs on the 800T-J42?
Answer: Yes. We offer repairs for the 800T-J42 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800T-J42?
Answer: If you buy the 800T-J42 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800T-J42 online?
Answer: Yes. Automation Stop sells the 800T-J42 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800T-J42?
Answer: The 800T-J42 is made by Allen Bradley - Miscellaneous.
For additional information about 800T-J42 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800T-J42.
Revision Part # | Also Known As | Availability |
---|---|---|
800T-J42/A | 800T-J42 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.