GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800T-J44A |
Series: | Allen Bradley 800T |
Description:
The Allen-Bradley 800T-J44A is a Selector Switch Device with three-position that can be selected by a D018 standard key. This key can be removed at any position. This device is conceived with metal. This cylinder lock operator has one N.O. and one N.C. contact with three positions. The switch includes a KB7 cam that allows contacts to make before contacts of the previous position break. The 800T-J44A has a push button with a diameter of 30.5 millimeters (1.2 inches). This selector switch device weighs approximately 230 grams (0.5 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 800T-J44A is a Selector Switch Device with three-position that can be selected by a D018 standard key. This key can be removed at any position. This device is conceived with metal. This cylinder lock operator has one N.O. and one N.C. contact with three positions. The switch includes a KB7 cam that allows contacts to make before contacts of the previous position break. The 800T-J44A has a push button with a diameter of 30.5 millimeters (1.2 inches). This selector switch device can be employed in many industrial applications such as in conjunction with a PLC controller and for motor controlling speed or rotation. This non-illuminated device comes without finger-safe guards.
The 800T-J44A offers an electrical isolation of 2200 Volts with electrical life cycles of one million and mechanical life cycles of two years. This device supports wires with a cross-section area range from 18 AWG to 14 AWG. The 800T-J44A can be stored in a safe environment that shouldn’t be full of condensation or corrosive at a temperature from -40 to 85 degrees Celsius (-40 degrees to 185 degrees Fahrenheit). The selector switch device supports a non-condensing relative humidity range from 5% to 95%. The contacts support a voltage of either 600 Volts DC or 600 Volts AC with a maximum current of 10 Amperes AC and 2.5 Amperes DC. This selector switch device operates at a temperature range of -40 to 55 degrees Celsius (-40 to 131 degrees Fahrenheit) and weighs approximately 230 grams (0.5 pounds) while shipping.
Brand | Allen-Bradley / Rockwell Automation |
Series | 800T |
Part Number | 800T-J44A |
Description | Three-Position Selector Switch Device |
Protection Rating | Metal, Type 4/13 |
Finger-Safe Guards | No Guards |
Key Removal Position | All |
Key Options for Cylinder Locks | D018 (standard key) |
Cam Option | KB7 Cam (Standard) |
Contact Blocks | 1 N.O. - 1 N.C. on White Side |
Illuminated Push Button | N/A |
Push Button Diameter | 30.5 millimeters |
Dielectric Strength | 2200 Volts for one minute, 1300 Volts for one minute (Logic Reed) |
Weight | 230 grams (0.5 pounds) |
Question: Does Automation Stop offer repairs on the 800T-J44A?
Answer: Yes. We offer repairs for the 800T-J44A and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800T-J44A?
Answer: If you buy the 800T-J44A through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800T-J44A online?
Answer: Yes. Automation Stop sells the 800T-J44A online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800T-J44A?
Answer: The 800T-J44A is made by Allen Bradley - Miscellaneous.
Question: What Brand does the Allen Bradley Automation 800T-J44A have?
Answer: The Allen Bradley Automation 800T-J44A has a Allen Bradley (AB) / Rockwell Automation Brand.
Question: What is the Cam Option of the 800T-J44A?
Answer: The Cam Option of the Allen Bradley Automation 800T-J44A is KB7 Cam (Standard).
Question: What is the Contact Blocks of the Allen Bradley/Rockwell Automation 800T-J44A?
Answer: The Contact Blocks of the Allen Bradley/Rockwell Automation 800T-J44A is 1 N.O. - 1 N.C. on White Side.
Question: What Description does the Allen Bradley-Rockwell Automation 800T-J44A have?
Answer: The 800T-J44A has a Three-Position Selector Switch Device Description.
Question: What is the Dielectric Strength of the Rockwell Automation 800T-J44A?
Answer: The Dielectric Strength of the 800T-J44A is 2200 Volts for one minute, 1300 Volts for one minute (Logic Reed).
Question: Does the Allen Bradley-Rockwell Automation 800T-J44A have a Finger-Safe Guards?
Answer: No Guards.
Question: What Illuminated Push Button does the 800T-J44A have?
Answer: The Allen-Bradley 800T-J44A has a N/A Illuminated Push Button.
Question: What is the Key Options for Cylinder Locks of the Rockwell-Automation 800T-J44A?
Answer: The Key Options for Cylinder Locks of the 800T-J44A is D018 (standard key).
Question: What Key Removal Position does the 800T-J44A have?
Answer: The Rockwell-Automation 800T-J44A has a All Key Removal Position.
Question: What unit Number does the 800T-J44A have?
Answer: The Rockwell-Automation 800T-J44A has a part Number of 800T-J44A.
Question: What Protection Rating does the 800T-J44A have?
Answer: The Protection Rating of the Allen Bradley Automation 800T-J44A is Metal, Type 4/13.
Question: What is the Push Button Diameter of the Allen Bradley Automation 800T-J44A?
Answer: The 800T-J44A has a Push Button Diameter of 30.5 millimeters.
Question: What is the Weight of the 800T-J44A?
Answer: The Weight of the Allen Bradley 800T-J44A is 230 grams (0.5 pounds).
For additional information about 800T-J44A check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800T-J44A.
Revision Part # | Also Known As | Availability |
---|---|---|
800T-J44A/A | 800T-J44A Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.