GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

F-4030-Q-H00AA

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: F-4030-Q-H00AA
Series: F Series

Description:

F-4030-Q-H00AA, which is a medium inertia servo motor, was designed for use with eight (8) pole wiring. The inbuilt thermostat on the servo motor is rated for 0 to 250 volts direct current (DC) at a frequency of 50 to 60 Hz. The thermostat functions as a switch for a 24-volt DC logic signal. The thermostat features a 5-ampere switching current and a contact resistance of less than 10 ohms.


Key Features:

  • comes with a frame size of 4030
  • has 8 poles
  • is discontinued/obsolete

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$1,891.00

Available: 7

What is Refurbished

Your order will ship by . Need it faster?

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number F-4030-Q-H00AA is an Allen-Bradley 1398 Ultra F Series servo motor, in which it has medium inertia and is brushless. The F-4030-Q-H00AA was designed to be used with Allen-Bradley's 1398 motion control system. This unit contains an IP65 rated, forty (40) mm frame size enclosure with a ferrite permanent magnet rotor and a watertight connecter that can operate in harsh industrial environments.

This Allen-Bradley module is interchangeable with H-Series servo motors, but due to the ferrite magnets, it has nearly four (4) times the inertia and it is compatible with the 1398 Ultra 100 and 200, as well as the Ultra Plus series of intelligent servo drives. With these drives, the continuous stall torque is three-point-five (3.5) Newton-meters. Furthermore, this unit's operating voltage is two hundred and thirty (230) volts alternating current (AC), with a friction torque of 0.063 Newton-meters at 25 degrees Celsius. The moment of inertia is 0.001 kg-m², and the damping value is 0.06 Newton-meters per 1000 rpm (revolutions per minute). The motor has a radial load rating of twenty-seven (2&) kilograms at one thousand (1000) rpm, as well as 17.2 kilograms at up to four thousand (4000) rpm. This motor is intended for use with eight (8) pole wiring and the integrated thermostat on the servo motor is rated for zero (0) to two hundred and fifty (250) volts direct current (DC) at a frequency of fifty (50) to sixty (60) hertz. The thermostat acts as a switch for a twenty-four (24) volts direct current (DC) logic signal. The thermostat has a switching current of five (5) amperes and a contact resistance of less than ten (10) ohms.

Technical Specifications

Manufacturer Allen Bradley
Series F
Product Type Brushless Servo Motor
Motor Model / Frame Size 4030
Motor Winding KE Voltage Designator 66 V/krpm
Optical Encoder Line Count 2000 (STANDARD)
Options Standard
Factory Designated Special Options Standard Flange
MPN F-4030-Q-H00AA
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the F-4030-Q-H00AA?

Answer: Yes. We offer repairs for the F-4030-Q-H00AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and F-4030-Q-H00AA?

Answer: If you buy the F-4030-Q-H00AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the F-4030-Q-H00AA online?

Answer: Yes. Automation Stop sells the F-4030-Q-H00AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the F-4030-Q-H00AA?

Answer: The F-4030-Q-H00AA is made by Allen Bradley - Miscellaneous.


Question: What type of product is the F-4030-Q-H00AA?

Answer: The F-4030-Q-H00AA is part of the F Series series.


Question: What kind of Factory Designated Special Options does the F-4030-Q-H00AA have?

Answer: The F-4030-Q-H00AA has Factory Designated Special Options Standard Flange.


Question: What Motor Model / Frame Size does the Rockwell-Automation F-4030-Q-H00AA have?

Answer: The F-4030-Q-H00AA has a Motor Model / Frame Size of 4030.


Question: What is the Motor Winding KE Voltage Designator of the Allen Bradley-Rockwell Automation F-4030-Q-H00AA?

Answer: The F-4030-Q-H00AA has a Motor Winding KE Voltage Designator of 66 V/krpm.


Question: What is the Optical Encoder Line Count of the F-4030-Q-H00AA?

Answer: The Allen Bradley-Rockwell Automation F-4030-Q-H00AA has a Optical Encoder Line Count of 2000 (STANDARD).


Question: What kind of Options does the Allen Bradley/Rockwell Automation F-4030-Q-H00AA have?

Answer: The Allen Bradley/Rockwell Automation F-4030-Q-H00AA has Options Standard.


Question: What Product Type does the Allen Bradley Automation F-4030-Q-H00AA have?

Answer: The F-4030-Q-H00AA has a Brushless Servo Motor Product Type.


Series information for F-4030-Q-H00AA

For additional information about F-4030-Q-H00AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding F-4030-Q-H00AA.

Revision Part # Also Known As Availability
F-4030-Q-H00AA/A F-4030-Q-H00AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • F-4030-Q-H0OAA
  • F-4030-Q-HO0AA
  • F-4030-Q-HOOAA
  • F-403O-Q-H00AA
  • F-403O-Q-H0OAA
  • F-403O-Q-HO0AA
  • F-403O-Q-HOOAA
  • F-4O30-Q-H00AA
  • F-4O30-Q-H0OAA
  • F-4O30-Q-HO0AA
  • F-4O30-Q-HOOAA
  • F-4O3O-Q-H00AA
  • F-4O3O-Q-H0OAA
  • F-4O3O-Q-HO0AA
  • F-4O3O-Q-HOOAA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP