GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC670ALG620

✓ In Stock

IC670ALG620 Image 1 thumbnail
IC670ALG620 Image 2 thumbnail
IC670ALG620 Image 3 thumbnail
IC670ALG620 Image 4 thumbnail
IC670ALG620 Image 5 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC670ALG620
Series: Field Control
UPC: 799705793262

Description:

The GE Fanuc Emerson IC670ALG620 is an RTD input module that has four channels. These inputs permit the direct connection between the PLC and RTD temperature sensors with 3-wire and 4-wire. The IC670ALG620 offers two resistance ranges.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$1,045.00

Available: 17

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$641.00

Available: 36

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$513.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a IC670ALG620? We can help!

Request a Quote

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC670ALG620 is an RTD input module that has four channels. These inputs permit the direct connection between the PLC and RTD temperature sensors with 3-wire and 4-wire. The IC670ALG620 offers two resistance ranges. These ranges are from 0 to 500 ohms and from 0 to 3 kiloohms. The device includes a single LED indicator on the faceplate to show the power presence, module, and diagnostics status. This module supports nickel/iron, platinum, copper, and nickel RTDs. This module offers a temperature resolution of ±0.3 to 0.5 degrees Celsius. The IC670ALG620 can detect the issue due to the open and short circuits, high/low alarm, overrange, and under range. This unit supports the integrating A/D conversion type with a scan rate of fifty or sixty channels per second and a resolution of 15 bits including the sign bit.

The IC670ALG620 offers a sensitivity of ± 1.5 microvolts per degree Celsius. This module draws a current of 190 milliamperes from the BIU power supply. The input module supports a relative humidity range from 5 percent to 95 percent without condensing and a vibration frequency range from 10 hertz to 500 hertz. The device has an operating specification for the mechanical shock level of 30 g. The module has also a storage specification for the mechanical shock level of 50 g. This unit supports a lead resistance of 5 ohms per lead. The IC670ALG620 weighs approximately 270 grams (0.57 pounds) while shipping and operates at 0 degrees to 55 degrees Celsius (32 degrees to 131 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series Field Control
Part Number IC670ALG620
Description RTD input module
Number of channels Four 3-wire and/or 4-wire inputs
Internal power 190 mA maximum from BIU power supply
Resistance ranges 0 to 500 ohms - 0 to 3000 ohms
Types supported 10, 25, 100, and 1000 ohm platinum / 10 and 100 ohm copper / 100, 50, and 120 ohm nickel / 604 ohms and 1000 ohms nickel/iron
Scan rate 60 Hz: approximately 210 milliseconds per point - 50 Hz: approximately 230 milliseconds per point
Maximum lead resistance 5 ohms per lead
Accuracy RTD: +/–0.15% of reading, +/–0.3 to 0.5 degree Celsius, depending on type
Fault detection Open RTD, input short, under range, overrange, and high/low alarm
Temperature sensitivity (0 to 60C) +/–0.004% of reading, +/–1.5mV per C referred to input
Normal mode voltage 100% overrange DC or peak AC operational - 28 VDC or peak AC maximum
A/D conversion type 15 bits plus sign
Isolation User input to logic, user input to frame ground : 1500 VAC for 1 minute, 250 VAC continuous - Channel to Channel : 250 VAC continuous.
Operating temperature 0°C to 55°C (32°F to 131°F)
Weight 270 g (0.59 lb.)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC670ALG620?

Answer: Yes. We offer repairs for the IC670ALG620 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC670ALG620?

Answer: If you buy the IC670ALG620 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC670ALG620 online?

Answer: Yes. Automation Stop sells the IC670ALG620 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC670ALG620?

Answer: The IC670ALG620 is made by Emerson - GE Fanuc.


Question: What is the A/D conversion type of the IC670ALG620?

Answer: The Allen Bradley IC670ALG620 has a A/D conversion type of 15 bits plus sign.


Question: What is the Accuracy of the IC670ALG620?

Answer: The IC670ALG620 has a Accuracy of RTD: +/–0.15% of reading, +/–0.3 to 0.5 degree Celsius, depending on type.


Question: What Brand is included with the Allen Bradley-Rockwell Automation IC670ALG620?

Answer: The IC670ALG620 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What Description does the Allen Bradley IC670ALG620 have?

Answer: The IC670ALG620 has a RTD input module Description.


Question: What Fault detection is included with the Allen-Bradley IC670ALG620?

Answer: The IC670ALG620 has a Open RTD, input short, under range, overrange, and high/low alarm Fault detection.


Question: What is the Internal power of the IC670ALG620?

Answer: The Internal power of the Rockwell Automation IC670ALG620 is 190 mA maximum from BIU power supply.


Question: What is the Isolation of the IC670ALG620?

Answer: The Isolation of the Rockwell-Automation IC670ALG620 is User input to logic, user input to frame ground : 1500 VAC (voltage alternating current) for 1 minute, 250 VAC (voltage alternating current) continuous - Channel to Channel : 250 VAC (voltage alternating current) continuous..


Question: What is the Maximum lead resistance of the IC670ALG620?

Answer: The Maximum lead resistance of the Allen Bradley/Rockwell Automation IC670ALG620 is 5 ohms per lead.


Question: What is the Normal mode voltage of the IC670ALG620?

Answer: The Normal mode voltage of the Rockwell Automation IC670ALG620 is 100% overrange direct current (DC) or peak alternating current (AC) operational - 28 VDC or peak alternating current (AC) maximum.


Question: What is the Number of channels of the IC670ALG620?

Answer: The Allen Bradley/Rockwell Automation IC670ALG620 has a Number of channels of Four 3-wire and/or 4-wire inputs.


Question: What Operating temperature does the IC670ALG620 have?

Answer: The Operating temperature of the Allen Bradley Automation IC670ALG620 is 0°C to 55°C (32°F to 131°F).


Question: What component Number does the IC670ALG620 have?

Answer: The IC670ALG620 has a part Number of IC670ALG620.


Question: What is the Resistance ranges of the IC670ALG620?

Answer: The Resistance ranges of the IC670ALG620 is 0 to 500 ohms - 0 to 3000 ohms.


Question: What is the Scan rate of the IC670ALG620?

Answer: The Allen Bradley Automation IC670ALG620 has a Scan rate of 60 Hz: approximately 210 milliseconds per point - 50 Hz: approximately 230 milliseconds per point.


Question: What is the Temperature sensitivity (0 to 60C) of the Allen Bradley/Rockwell Automation IC670ALG620?

Answer: The Allen Bradley/Rockwell Automation IC670ALG620 has a Temperature sensitivity (0 to 60C) of +/–0.004% of reading, +/–1.5mV per C referred to input.


Question: What Types supported does the Allen-Bradley IC670ALG620 have?

Answer: The Types supported of the IC670ALG620 is 10, 25, 100, and 1000 ohm platinum / 10 and 100 ohm copper / 100, 50, and 120 ohm nickel / 604 ohms and 1000 ohms nickel/iron.


Question: What is the Weight of the Allen-Bradley IC670ALG620?

Answer: The Allen-Bradley IC670ALG620 has a Weight of 270 g (0.59 lb.).


Series information for IC670ALG620

For additional information about IC670ALG620 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC670ALG620.

Revision Part # Also Known As Availability
IC670ALG620-HC IC670ALG620 Series HC, Rev HC Request a Quote
IC670ALG620-JD IC670ALG620 Series JD, Rev JD Request a Quote

Common Misspellings:

  • IC670ALG62O
  • IC670ALGG20
  • IC670ALGG2O
  • IC670AL6620
  • IC670AL662O
  • IC670AL6G20
  • IC670AL6G2O
  • IC67OALG620
  • IC67OALG62O
  • IC67OALGG20
  • IC67OALGG2O
  • IC67OAL6620
  • IC67OAL662O
  • IC67OAL6G20
  • IC67OAL6G2O
  • ICG70ALG620
  • ICG70ALG62O
  • ICG70ALGG20
  • ICG70ALGG2O
  • ICG70AL6620
  • ICG70AL662O
  • ICG70AL6G20
  • ICG70AL6G2O
  • ICG7OALG620
  • ICG7OALG62O
  • ICG7OALGG20
  • ICG7OALGG2O
  • ICG7OAL6620
  • ICG7OAL662O
  • ICG7OAL6G20
  • ICG7OAL6G2O
  • 1C670ALG620
  • 1C670ALG62O
  • 1C670ALGG20
  • 1C670ALGG2O
  • 1C670AL6620
  • 1C670AL662O
  • 1C670AL6G20
  • 1C670AL6G2O
  • 1C67OALG620
  • 1C67OALG62O
  • 1C67OALGG20
  • 1C67OALGG2O
  • 1C67OAL6620
  • 1C67OAL662O
  • 1C67OAL6G20
  • 1C67OAL6G2O
  • 1CG70ALG620
  • 1CG70ALG62O
  • 1CG70ALGG20
  • 1CG70ALGG2O
  • 1CG70AL6620
  • 1CG70AL662O
  • 1CG70AL6G20
  • 1CG70AL6G2O
  • 1CG7OALG620
  • 1CG7OALG62O
  • 1CG7OALGG20
  • 1CG7OALGG2O
  • 1CG7OAL6620
  • 1CG7OAL662O
  • 1CG7OAL6G20
  • 1CG7OAL6G2O

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP