GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC670MDL640 |
| Series: | Field Control |
| UPC: | 799705793026 |
Description:
The GE Fanuc Emerson IC670MDL640 is an input module that includes sixteen input points that support a voltage of 24 volts DC. The module inputs are grouped into a single well-isolated group of sixteen channels. The IC670MDL640 weighs approximately 190 grams (0.41 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Adding Items to Cart
Looking for a IC670MDL640? We can help!
Request a QuotePay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC670MDL640 is an input module that includes sixteen input points. These inputs support a voltage rating range from 0 volts DC to 30 volts DC and can be either positive or negative logic inputs. The module inputs are grouped into a single well-isolated group of sixteen inputs that are labeled with green LED indicators to show the on/off status of inputs with a single common power terminal. This module employs the backplane optical isolation offered by optocouplers to provide electrical isolation of 250 volts AC continuously between logic and field sides and 1500 volts AC for one minute. The IC670MDL640 can be easily mounted in any input or output slots of the Field Control system. The input module provides an on response time of 6 milliseconds and an off response time of 6 milliseconds.
The IC670MDL640 employs an input data of 16 bits to communicate with the CPU. This module draws a current of 83 milliamperes from the bus interface unit power supply. The module inputs draw a current of 7.5 milliamperes per point at a voltage of 24 volts DC. The module has another LED indicator labeled “PWR LED” that indicates the presence of electrical power. The IC670MDL640 has an input impedance of 3 kiloohms. The module has an on-state current of 8 milliamperes and an off-state current of 1.5 milliamperes. The IC670MDL640 weighs approximately 190 grams (0.41 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | Field Control |
| Part Number | IC670MDL640 |
| Description | Positive/Negative discrete input module |
| Number of I/O points | 16 inputs |
| Input groups | 1 |
| Rated voltage | 24 volts DC |
| Input voltage range | 0 – 30 VDC |
| Isolation | 250 VAC continuous, 1500 VAC for 1 minute |
| Input current | 7.5 mA per point at 24 VDC |
| On-state voltage | Positive logic: +15V to +30V / Negative logic: –15V to –30V |
| Off-state voltage | Positive logic: 0 to +5V / Negative logic: 0 to –5V |
| On-state current | 3.0 mA to 8 mA |
| Off-state current | 0 mA to 1.5 mA |
| On response time | 6 ms typical, 10 ms maximum |
| Off response time | 6 ms typical, 10 ms maximum |
| Current drawn from bus interfac unit power supply | 75 mA, typical (all points on) / 83 mA, maximum |
| Weight | 190 g (0.41 lb) |
FAQ
Question: Does Automation Stop offer repairs on the IC670MDL640?
Answer: Yes. We offer repairs for the IC670MDL640 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC670MDL640?
Answer: If you buy the IC670MDL640 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC670MDL640 online?
Answer: Yes. Automation Stop sells the IC670MDL640 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC670MDL640?
Answer: The IC670MDL640 is made by Emerson - GE Fanuc.
Question: What Brand does the IC670MDL640 have?
Answer: The Allen-Bradley IC670MDL640 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What is the Current drawn from bus interfac unit power supply of the Rockwell-Automation IC670MDL640?
Answer: The Current drawn from bus interfac unit power supply of the IC670MDL640 is 75 mA, typical (all points on) / 83 mA, maximum.
Question: What Description is included with the IC670MDL640?
Answer: The Rockwell Automation IC670MDL640 has a Positive/Negative discrete input module Description.
Question: What Input current does the Allen Bradley Automation IC670MDL640 have?
Answer: The Input current of the IC670MDL640 is 7.5 mA per point at 24 VDC.
Question: What Input groups does the Allen Bradley IC670MDL640 have?
Answer: The Allen Bradley IC670MDL640 has a Input groups of 1.
Question: What Input voltage range does the IC670MDL640 have?
Answer: The Input voltage range of the IC670MDL640 is 0 – 30 VDC.
Question: What is the Isolation of the Rockwell-Automation IC670MDL640?
Answer: The Rockwell-Automation IC670MDL640 has a Isolation of 250 VAC (voltage alternating current) continuous, 1500 VAC (voltage alternating current) for 1 minute.
Question: What is the Number of input/output points of the IC670MDL640?
Answer: The Number of input/output points of the Allen Bradley IC670MDL640 is 16 inputs.
Question: What Off response time does the Allen Bradley-Rockwell Automation IC670MDL640 have?
Answer: The Off response time of the IC670MDL640 is 6 ms typical, 10 ms maximum.
Question: What Off-state current does the Allen Bradley/Rockwell Automation IC670MDL640 have?
Answer: The Off-state current of the Allen Bradley/Rockwell Automation IC670MDL640 is 0 mA to 1.5 mA.
Question: What Off-state voltage does the IC670MDL640 have?
Answer: The Off-state voltage of the Allen Bradley/Rockwell Automation IC670MDL640 is Positive logic: 0 to +5 volts / Negative logic: 0 to –5V.
Question: What is the On response time of the IC670MDL640?
Answer: The On response time of the Allen Bradley IC670MDL640 is 6 ms typical, 10 ms maximum.
Question: What is the On-state current of the Allen Bradley/Rockwell Automation IC670MDL640?
Answer: The On-state current of the Allen Bradley/Rockwell Automation IC670MDL640 is 3.0 mA to 8 mA.
Question: What On-state voltage does the Rockwell Automation IC670MDL640 have?
Answer: The IC670MDL640 has a On-state voltage of Positive logic: +15 volts to +15 volts / Negative logic: –15 volts to –30V.
Question: What is the part Number of the IC670MDL640?
Answer: The unit Number of the IC670MDL640 is IC670MDL640.
Question: What is the Rated voltage of the IC670MDL640?
Answer: The Allen Bradley-Rockwell Automation IC670MDL640 has a Rated voltage of 24 volts direct current.
Question: What is the Weight of the IC670MDL640?
Answer: The Weight of the Rockwell Automation IC670MDL640 is 190 g (0.41 lb).
Series information for IC670MDL640
For additional information about IC670MDL640 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC670MDL640.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC670MDL640C | IC670MDL640 Series C, Rev C | Request a Quote |
| IC670MDL640D | IC670MDL640 Series D, Rev D | Request a Quote |
| IC670MDL640H | IC670MDL640 Series H, Rev H | Request a Quote |
| IC670MDL640J | IC670MDL640 Series J, Rev J | Request a Quote |
| IC670MDL640L | IC670MDL640 Series L, Rev L | Request a Quote |
Common Misspellings:
- IC670MDL64O
- IC670MDLG40
- IC670MDLG4O
- IC67OMDL640
- IC67OMDL64O
- IC67OMDLG40
- IC67OMDLG4O
- ICG70MDL640
- ICG70MDL64O
- ICG70MDLG40
- ICG70MDLG4O
- ICG7OMDL640
- ICG7OMDL64O
- ICG7OMDLG40
- ICG7OMDLG4O
- 1C670MDL640
- 1C670MDL64O
- 1C670MDLG40
- 1C670MDLG4O
- 1C67OMDL640
- 1C67OMDL64O
- 1C67OMDLG40
- 1C67OMDLG4O
- 1CG70MDL640
- 1CG70MDL64O
- 1CG70MDLG40
- 1CG70MDLG4O
- 1CG7OMDL640
- 1CG7OMDL64O
- 1CG7OMDLG40
- 1CG7OMDLG4O
