GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC754VGI12CTD |
Series: | QuickPanel Displays |
Description:
The IC754VGI12CTD is an all-in-one microcomputer. This device, which was designed and produced by General Electric, has a maximum rated voltage of 30 volts DC, as well as a rated voltage of 24 volts DC. The power consumption rating of this device is 15 watts maximum. This computer is equipped with a 7-inch widescreen TFT LCD display. The physical dimensions of this product measure 192 mm x 137 mm x 36 mm, with an approximate weight of 0.800 kilograms.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number IC754VGI12CTD is an all-in-one microcomputer that was designed and manufactured by General Electric. This computer is equipped with a high-resolution touchscreen that is used as the primary operator interface. This product was designed for maximum flexibility. This computer is equipped with a Freescale i.MX535 (1 GHz ARM Cortex A8) processor. This GE computer has an available memory consisting of 512 megabytes (MB) of DDR2 SDRAM, 256 megabytes (MB) of SLC NAND ROM, and 512 kilobytes (KB) of SRAM with a battery backup. The display that is equipped to this computer has a 7-inch widescreen TFT (thin film transistor) LCD (liquid crystal display). It is capable of displaying a resolution of 800 x 480 pixels WVGA. There is an LED backlight. Additionally, this computer is equipped with various communication ports. These communication ports include one (1) 10/100BaseT (RJ-45) Ethernet port, one (1) RS-232 UART serial port, two (2) USB 2.0 Type A host ports, and one (1) USB 2.0 Mini Type B device port. This computer has a maximum rated voltage of +30 volts direct current (DC), with a rated voltage of +24 volts DC, +/- 20 percent. The power consumption rating of this device is 15 watts maximum. The ambient operating temperature for this device should range from 0 degrees Celsius to 50 degrees Celsius. The storage temperature for this device should range from -20 degrees Celsius to +60 degrees Celsius. This computer has physical dimensions that measure 192 mm x 137 mm x 36 mm. the approximate weight of this device is 0.800 kilograms, or the equivalent of 1.76 pounds.
Question: Does Automation Stop offer repairs on the IC754VGI12CTD?
Answer: Yes. We offer repairs for the IC754VGI12CTD and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC754VGI12CTD?
Answer: If you buy the IC754VGI12CTD through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC754VGI12CTD online?
Answer: Yes. Automation Stop sells the IC754VGI12CTD online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC754VGI12CTD?
Answer: The IC754VGI12CTD is made by Emerson - GE Fanuc.
For additional information about IC754VGI12CTD check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC754VGI12CTD.
Revision Part # | Also Known As | Availability |
---|---|---|
IC754VGI12CTD-KJ | IC754VGI12CTD Series KJ, Rev KJ | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.