GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | ST-2324 |
Series: | RSTi PacSystem |
UPC: | 799705804562 |
Description:
Part number ST-2324 is an RSTi PacSystem four-point source output module. This device was manufactured by Emerson - GE Fanuc. This device has an output voltage range of 24 volts DC nominal. The on-state voltage drop is rated at a maximum 0.3 volts DC at 25 degrees Celsius. It has a rated power dissipation of 45 milliamperes at 5.0 volts DC. The weight of this product is approximately 70 grams. It has physical dimensions that measure 12 mm x 99 mm x 70 mm.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The ST-2324 is an RSTi PacSystem four-point source-type output module that was manufactured by Emerson - GE Fanuc to be an N-Channel enhancement mode MOSFET module. There are four green output indicator states with one green/red FnBUS state. The field power supply voltage is 24 volts DC nominal with a voltage range of 11 volts DC to 28.8 volts DC. The ON-state voltage drop is a maximum of 0.3 volts DC at 25 degrees Celsius. The ON-state has a minimum current of 1 milliampere per channel, with OFF-state leakage of 50 micro-amperes maximum. The output signal delay in OFF to ON is a maximum of 0.3 milliseconds and the ON to OFF is a maximum of 0.3 milliseconds. The output current of this device is rated at 0.5 amperes per channel and a maximum of 2.0 amperes in all commons. The maximum power dissipation rating of this product is 45 milliamperes at 5.0 volts DC with I/O to Logic photo coupler isolation. The field power dissipation rating is 5 milliamperes at 28.8 volts DC per channel. This GE Fanuc device has a weight of approximately 70 grams. Additionally, it has physical dimensions that measure 12 millimeters x 99 millimeters x 70 millimeters. This module has an operating temperature range of -20 to 60 degrees Celsius for discrete I/O and 0 to 60 degrees Celsius for analog I/O. The storage temperature range for this device, however, is -40 to 85 degrees Celsius. It has a relative humidity rating of 5% to 90% with no condensation.
Question: Does Automation Stop offer repairs on the ST-2324?
Answer: Yes. We offer repairs for the ST-2324 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and ST-2324?
Answer: If you buy the ST-2324 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the ST-2324 online?
Answer: Yes. Automation Stop sells the ST-2324 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the ST-2324?
Answer: The ST-2324 is made by Emerson - GE Fanuc.
Question: What amperage is included with the ST-2324?
Answer: The ST-2324 has a amperage of 0.5.
For additional information about ST-2324 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding ST-2324.
Revision Part # | Also Known As | Availability |
---|---|---|
ST-2324-BA | ST-2324 Series BA, Rev BA | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.