GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | ST-2524 |
Series: | RSTi PacSystem |
UPC: | 799705804616 |
Description:
The ST-2524 is an RSTI PacSystem output module. This device was designed and manufactured by Emerson - GE Fanuc. This device has four (4) points. It has an input current range of 2 amperes with a power supply rating of 12 to 24 volts DC. This device may be mounted via a panel mount or a 35 mm DIN rail. The peak power consumption of this module is 45 milliamperes at 5.0 volts DC. The operating temperature of this module ranges from -20 to 55 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The ST-2524 module is an RSTi PacSystem expansion module designed and distributed by Emerson - GE Fanuc. This expansion module is engineered to provide positive logic and diagnostic input current range of up to 2 amperes. This device features four (4) discrete positive logic outputs that function on a 12 to 24 volts DC power supply. It supports 35 mm DIN rail mounting and weighs approximately 70 grams. It has four (4) green output indicators that display output status in two colors, which are red and green. The peak power consumption of this expansion module is 45 mA at 5.0 Volts DC. Aside from that, it can use removable terminal blocks (cage clamps) while the output specifications include positive transistor logic. The on-state voltage drop rating of this unit is 1.0 Volt DC at 25 °C. Besides that, its output voltage range is 25 Volts DC (11 to 28.8 Volts), the module's on state minimum current rating is 1mA, while its off state leakage current rating is 150 micro-amperes. Its output delay ranges include 0.3 milliseconds for off to on, as well as from on to off. Additionally, its output current rating includes 2.0 amperes, with 8.0 amperes per common. This product is released with output short circuit protection. This device should be stored in an area where the temperature ranges from -40°C to + 85°C. Additionally, it should be operated in an area where the temperature ranges from -20°C to + 55°C. The users should observe these directives to keep this expansion module from unwanted malfunctions and long-lasting performance. Overall, it is a high-end compact design architecture that can be suitable for a wide range of industrial environments.
Question: Does Automation Stop offer repairs on the ST-2524?
Answer: Yes. We offer repairs for the ST-2524 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and ST-2524?
Answer: If you buy the ST-2524 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the ST-2524 online?
Answer: Yes. Automation Stop sells the ST-2524 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the ST-2524?
Answer: The ST-2524 is made by Emerson - GE Fanuc.
Question: What amperage does the Emerson - GE Fanuc ST-2524 have?
Answer: The ST-2524 has a amperage of 2.
For additional information about ST-2524 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding ST-2524.
Revision Part # | Also Known As | Availability |
---|---|---|
ST-2524-AA | ST-2524 Series AA, Rev AA | Request a Quote |
ST-2524-BA | ST-2524 Series BA, Rev BA | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.