GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC694MDL632 |
| Series: | RX3i PacSystem |
| UPC: | 363864146216 |
Description:
The IC694MDL632 is a GE Fanuc Discrete Input Module, 125 V DC, Positive/Negative, 8-Point Module for the PACSystems RX3i family of PLCs. It has eight inputs split into 2 four-point groups. It has eight inputs separated into two 4 groupings. Each of the groupings is configurable for positive or negative logic. Every group has its own common area, which is unconnected inside the module. The module consumes 36-milliamps from the user input supply and 40-milliamps from the backplane's 5V bus and when all inputs are enabled.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc manufactured IC694MDL632 Input Module is part of the GE RX3i PacSystem family. It offers positive or negative logic voltage level of 125 Volts DC, a voltage level that varies between 0 and 150 Volts DC, and a typical current is flowing of 4.5 milliamperes. The IC694MDL632 Input Module consumes 40 milliamperes from the backplane's 5 V bus and 36 milliamperes (typically) from the user input power. This Module's inputs have some criteria, like, an on-state voltage range between 90 and 150 Volts DC, an off-state voltage range of 0 - 30 Volts DC, an on-state current of 3.1 milliamperes, an off-state current of 1.1 milliamperes, a typical response time of 7 milliseconds for "on" and 7 milliseconds for "off".
The GE Fanuc made IC694MDL632 Input module, features eight input points separated into two independent groups of four each. Each group is connected to a source of negative or positive logic. Due to the inputs' features, they are compatible with input devices such as electronic proximity switches, pushbuttons, and limit switches. To work efficiently, the field devices require user-supplied electricity. This Module features eight green LEDs that indicate whether the input points are active or inactive. This Module is a high-voltage module, as indicated by the red band at the Module's top. The GE Fanuc IC694MDL632 Input Module operates between 0 and 60 degrees Celsius (32 and 140 0F) and is stored between -40 and 85 ° C. (-40 to 185 degrees Fahrenheit). It goes with a non-condensing humidity range of 5 to 95 percentages.
FAQ
Question: Does Automation Stop offer repairs on the IC694MDL632?
Answer: Yes. We offer repairs for the IC694MDL632 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694MDL632?
Answer: If you buy the IC694MDL632 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694MDL632 online?
Answer: Yes. Automation Stop sells the IC694MDL632 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694MDL632?
Answer: The IC694MDL632 is made by Emerson - GE Fanuc.
Series information for IC694MDL632
For additional information about IC694MDL632 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694MDL632.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC694MDL632A | IC694MDL632 Series A, Rev A | Request a Quote |
| IC694MDL632B | IC694MDL632 Series B, Rev B | Request a Quote |
| IC694MDL632C | IC694MDL632 Series C, Rev C | Request a Quote |
| IC694MDL632-CAA | IC694MDL632 Series CAA, Rev CAA | Request a Quote |
Common Misspellings:
- IC694MDLG32
- ICG94MDL632
- ICG94MDLG32
- 1C694MDL632
- 1C694MDLG32
- 1CG94MDL632
- 1CG94MDLG32
