GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC694MDL658 |
Series: | RX3i PacSystem |
Description:
Part number IC694MDL658 is a DC voltage discrete input module, produced by Emerson - GE Fanuc, as part of the IC694 product series for RX3i rack systems. This module is equipped with 32 input points that have a response time rated at 2 milliseconds. The rated supply voltage of this device is 48 volts DC, with an input voltage range of 0 to 60 volts DC. The input current rated is 1.7 milliamperes at 48 volts DC. This device has a current consumption rating of 195 milliamperes at 5 volts DC.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number IC694MDL658 is a input only module, manufactured by Emerson - GE Fanuc. This device is part of the IC694 product series for applications in an RX3i PacSystem rack system. These RX3i systems allow installation of multiple I/O modules with various voltages and current capacities. Independently from the I/O variety chosen, the RX3i system constitutes of interfaces with high speed that provide fast and continuous transfer of data. The RX3i system of I/O modules is highly scalable, and it can be expanded by connecting to additional racks.
The IC694MDL658 device is a DC voltage discrete input only unit. This GE Fanuc device is equipped with thirty-two (32) inputs per module, in which these inputs are divided into four (4) groups of eight (8) inputs. The input points have a response time rated at two (2) milliseconds, which is valid for both On and Off activity. The input device has a supply voltage of 48 volts DC, as the unit can accept fluctuations in the range of 40 to 60 volts DC. The minimum required supply voltage for On is 34 volts DC. This module has an input current rating of 1.7 milliamperes at 48 volts direct current (DC). The backplane current consumption of the module is 195 milliamperes, estimated at 5 volts DC. This GE Fanuc device can be operated in hazardous environments of type Class I, Division 2, Groups A, B, C, and D. This discrete input voltage unit can be installed either on panel or in a DIN rail.
Question: Does Automation Stop offer repairs on the IC694MDL658?
Answer: Yes. We offer repairs for the IC694MDL658 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694MDL658?
Answer: If you buy the IC694MDL658 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694MDL658 online?
Answer: Yes. Automation Stop sells the IC694MDL658 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694MDL658?
Answer: The IC694MDL658 is made by Emerson - GE Fanuc.
For additional information about IC694MDL658 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694MDL658.
Revision Part # | Also Known As | Availability |
---|---|---|
IC694MDL658A | IC694MDL658 Series A, Rev A | Request a Quote |
IC694MDL658B | IC694MDL658 Series B, Rev B | Request a Quote |
IC694MDL658C | IC694MDL658 Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.