GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC694MDL752 |
| Series: | RX3i PacSystem |
| UPC: | 972531322046 |
Description:
The IC694MDL752 is a negative logic output module that was designed and produced by Emerson - GE Fanuc as a member of the RX3i PacSystem series of products. This module provides 32 distinct TTL voltage threshold output points. These output points are divided into four groups of eight outputs. The inrush rating of this device is 4.6 amperes. Additionally, the maximum backplane draw is rated at 260 milliamperes. The maximum response time from on to off is 0.5 milliseconds.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
GE Fanuc designed and manufactured the IC694MDL752 module as a part of the RX3i PacSystem series of products. To fulfill the demands of every application, the IC694MDL752 covers a wide range of voltage ranges, kinds, current capacity, isolation, and response time. It generates 32 different outputs, which are organized into four groups of eight outputs each. Each group can be utilized to power various loads. It has two operating modes, which include the TTL mode and the 12 to 24 volts mode. In TTL mode, the output load switches across +5 Volts of Direct Current, whereas in the 12- to 24-volts mode, the load may transition between +12 and -24 Volts of Direct Current. In both modes, the maximum sinking current is 25 milliamperes and 0.5 amperes, respectively. Input / output connections have two pins for each group, with a current rating of 3 amperes on each pin. When connecting the ground in high current applications which is between 3 and 4 amperes, it is advised to connect both pins. It is critical to consider the consequences of electrical noise when combining TTL and inductive loads. Each point has a pull-up resistor built into it. When the FET output point is turned off, the resistor passively increases the output to the user's positive current input, usually + 5V for TTL mode, giving a high logic level for TTL applications. When the CPU is switched off, all 32 outputs are turned off forcibly. Optocouplers in the module separate the backplane between the field side and the logical side. There are no particular error or alert diagnoses recorded.
FAQ
Question: Does Automation Stop offer repairs on the IC694MDL752?
Answer: Yes. We offer repairs for the IC694MDL752 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694MDL752?
Answer: If you buy the IC694MDL752 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694MDL752 online?
Answer: Yes. Automation Stop sells the IC694MDL752 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694MDL752?
Answer: The IC694MDL752 is made by Emerson - GE Fanuc.
Series information for IC694MDL752
For additional information about IC694MDL752 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694MDL752.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC694MDL752A | IC694MDL752 Series A, Rev A | Request a Quote |
| IC694MDL752B | IC694MDL752 Series B, Rev B | Request a Quote |
| IC694MDL752C | IC694MDL752 Series C, Rev C | Request a Quote |
Common Misspellings:
- IC694MDL7S2
- ICG94MDL752
- ICG94MDL7S2
- 1C694MDL752
- 1C694MDL7S2
- 1CG94MDL752
- 1CG94MDL7S2
