GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC694MDL931 |
Series: | RX3i PacSystem |
UPC: | 102640829406 |
Description:
The IC694MDL931 is a unit that is designed and manufactured by General Electric or GE Fanuc. The unit is designed to be an Output module as part of the family of RX3i Series of Output modules. The Direct Current or DC Voltage rating is 24 Volts (V) DC, and The Alternating Current or AC Voltage rating is 120/240 Volts (V) AC. The other features are that the module is an eight-point, eight Amp, Isolated Relay Output Module with the relay providing four normally closed and four form C relay circuitry available for controlling output loads.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The General Electric or GE Fanuc has a unit with the catalog number IC694MDL931 which is described to be used as an Output module and the module belongs to GE Fanuc’s RX3i Series or line of Output modules. One of the main specifications includes the power supply rating which is 24 Volts (V) Direct Current (DC) when used in Direct Current (DC) mode, and 120/240 Volts (V) Alternating Current when dealing with power supply in Alternating Current (AC). Other specifications in the output module include the number of Outputs which are 8 and isolated, frequency in Alternating current mode which is 50-60 Hertz (Hz), the output current rating is 20 Amperes (A) per module, and 8 Amperes (A) for maximum resistance. The power consumption is rated at 6 milliamperes (mA) from 5 Volts (V) bus and 110 milliamperes (mA) from 24 Volts (V) relay.
The relay for the output module allows the control of output loads with the help of four normally closed and four form C relay circuitry available on the module. The Inrush Current for the module is 8 Amperes (A) maximum for one cycle. The On-response time is 15 milliseconds (ms) maximum, and the Off Response Time is the same which is 15 milliseconds (ms) maximum for the output module. The maximum output leakage current for the IC694MDL931 module is 1 milliampere (mA) at 250 Volts (V) Alternating Current (AC) at 25 degrees Celsius (°C) or 77 degrees Fahrenheit (°F). The mounting format for the module is an On Panel or a DIN format.
Question: Does Automation Stop offer repairs on the IC694MDL931?
Answer: Yes. We offer repairs for the IC694MDL931 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694MDL931?
Answer: If you buy the IC694MDL931 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694MDL931 online?
Answer: Yes. Automation Stop sells the IC694MDL931 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694MDL931?
Answer: The IC694MDL931 is made by Emerson - GE Fanuc.
For additional information about IC694MDL931 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694MDL931.
Revision Part # | Also Known As | Availability |
---|---|---|
IC694MDL931A | IC694MDL931 Series A, Rev A | Request a Quote |
IC694MDL931B | IC694MDL931 Series B, Rev B | Request a Quote |
IC694MDL931C | IC694MDL931 Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.