GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC694PWR330 |
Series: | RX3i PacSystem |
UPC: | 444765471796 |
Description:
The GE Fanuc Emerson IC694PWR330 is a high efficiency power supply that delivers a power of 30 Watts. The IC694PWR330 supports either an input voltage of 120/240 Volts AC or 125 Volts DC. The IC694PWR330 delivers three (3) different output voltages with different electrical powers: 5 Volts DC with an electrical power of 30 Watts, isolated 24 Volts DC with an electrical power of 20 Watts, and relay 24 Volts DC with an electrical power of 15 Watts.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC694PWR330 is a high capacity power supply that delivers a power of 30 Watts. The IC694PWR330 supports either an input voltage range from 100 Volts DC to 300 Volts DC or an input voltage range from 85 Volts AC to 264 Volts AC. The IC694PWR330 delivers three (3) different output voltages with different electrical powers: 5 Volts DC with an electrical power of 30 Watts, isolated 24 Volts DC with an electrical power of 20 Watts, and relay 24 Volts DC with an electrical power of 15 Watts. The IC694PWR330 includes single fuse protection that has a current rating of 2 Amperes. The IC694PWR330 has three (3) green LED status indicators at the power supply front side. This power supply supports an overvoltage range from 6.4 Volts DC to 7 Volts DC and an overcurrent of 7 Amperes on the 5 Volts DC output.
The IC694PWR330 power supply supports a maximum input power of 50 Watts with DC input, 100 Volt-amperes with AC input at full load, and an inrush current of 4 Amperes within a short time of 250 milliseconds. The IC694PWR330 delivers a total electrical power of 30 Watts. The IC694PWR330 has a holdup time of 20 milliseconds and has a door to cover and protect the user from accidental shock hazard. The IC694PWR330 power supply can be easily installed in an RX3i expansion backplane. This power supply weighs approximately 610 grams (1.34 pounds) while shipping and operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.
Brand | GE Automation Fanuc / Emerson Automation |
Series | 120/240 VAC /125 VDC, 30 Watts power supply for Rx3i PacSystem |
Part Number | IC694PWR330 |
Power Supply Type | AC/DC input power supply |
Load Capacity | 30 Watts |
Nominal Input | 120/240 VAC or 125 VDC |
Input Voltage Range | 85 VAC to 264 VAC or 100 VDC to 300 VDC |
Input Power | 100 Volt-amperes with VAC Input/50 Watts with VDC Input |
Inrush Current | 4 Amperes peak, 250 milliseconds maximum |
Output Capacities | +5 VDC, 30 Watts / +24 VDC Isolated, 20 Watts / +24 VDC Relay, 15 Watts |
Fuse Current Rating | 2 Amperes |
Number of Fuses | 1 |
Overvoltage | 5 VDC output: 6.4 to 7 Volts |
Overcurrent | 5 VDC Output: 7 Amperes maximum |
Holdup time | 20 milliseconds, minimum |
Weight | 610 g (1.34 lb) |
Question: Does Automation Stop offer repairs on the IC694PWR330?
Answer: Yes. We offer repairs for the IC694PWR330 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694PWR330?
Answer: If you buy the IC694PWR330 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694PWR330 online?
Answer: Yes. Automation Stop sells the IC694PWR330 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694PWR330?
Answer: The IC694PWR330 is made by Emerson - GE Fanuc.
Question: What Brand does the Allen-Bradley IC694PWR330 have?
Answer: The Allen-Bradley IC694PWR330 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What is the Fuse Current Rating of the IC694PWR330?
Answer: The IC694PWR330 has a Fuse Current Rating of 2 Amperes.
Question: What Holdup time does the IC694PWR330 have?
Answer: The Holdup time of the IC694PWR330 is 20 milliseconds, minimum.
Question: What Input Power does the IC694PWR330 have?
Answer: The Input Power of the Allen Bradley IC694PWR330 is 100 Volt-amperes with VAC (voltage alternating current) Input/50 Watts with VDC Input.
Question: What is the Input Voltage Range of the Rockwell-Automation IC694PWR330?
Answer: The Rockwell-Automation IC694PWR330 has a Input Voltage Range of 85 voltage alternating current (VAC) to 264 voltage alternating current (VAC) or 100 VDC to 300 VDC.
Question: What is the Inrush Current of the IC694PWR330?
Answer: The Inrush Current of the Allen-Bradley IC694PWR330 is 4 Amperes peak, 250 milliseconds maximum.
Question: What is the Load Capacity of the Allen Bradley Automation IC694PWR330?
Answer: The Allen Bradley Automation IC694PWR330 has a Load Capacity of 30 Watts.
Question: What Nominal Input does the IC694PWR330 have?
Answer: The IC694PWR330 has a Nominal Input of 120/240 VAC (voltage alternating current) or 125 VDC.
Question: What Number of Fuses does the Allen Bradley-Rockwell Automation IC694PWR330 have?
Answer: The IC694PWR330 has a Number of Fuses of 1.
Question: What is the Output Capacities of the IC694PWR330?
Answer: The Output Capacities of the IC694PWR330 is +5 VDC, 30 Watts / +24 VDC Isolated, 20 Watts / +24 VDC Relay, 15 Watts.
Question: What Overcurrent does the Allen Bradley-Rockwell Automation IC694PWR330 have?
Answer: The Overcurrent of the IC694PWR330 is 5 VDC Output: 7 Amperes maximum.
Question: What Overvoltage does the Allen Bradley/Rockwell Automation IC694PWR330 have?
Answer: The IC694PWR330 has a Overvoltage of 5 VDC output: 6.4 to 7 Volts.
Question: What part Number does the Allen-Bradley IC694PWR330 have?
Answer: The Allen-Bradley IC694PWR330 has a component Number of IC694PWR330.
Question: What power supply unit Type is included with the Rockwell Automation IC694PWR330?
Answer: The Rockwell Automation IC694PWR330 has a AC (alternating current)/DC input power supply component power supply component Type.
Question: What is the Weight of the IC694PWR330?
Answer: The Allen Bradley-Rockwell Automation IC694PWR330 has a Weight of 610 g (1.34 lb).
For additional information about IC694PWR330 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694PWR330.
Revision Part # | Also Known As | Availability |
---|---|---|
IC694PWR330A | IC694PWR330 Series A, Rev A | Request a Quote |
IC694PWR330B | IC694PWR330 Series B, Rev B | Request a Quote |
IC694PWR330D | IC694PWR330 Series D, Rev D | Request a Quote |
IC694PWR330E | IC694PWR330 Series E, Rev E | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.