GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC693ACC350 |
Series: | Series 90-30 |
Description:
Part number IC693ACC350 is a redundant power supply adapter that was designed and manufactured by Emerson - GE Fanuc. This adapter belongs to the Series 90-30 line of products. This device is equipped with three (3) power terminals. It has an operating voltage rating of 120 to 240 volts AC or 125 volts DC. This adapter's output voltage rating is 5 volts DC. This device is equipped with an RS-485 port for communication purposes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC693ACC350 redundant power supply adapter, which was designed and manufactured by Emerson - GE Fanuc, operates by application of multiple power supplies. For this case, this adapter module has three (3) terminals for power supply and the operating voltage is rated at one hundred and twenty (120) volts alternating current (AC) to two hundred and forty (240) volts alternating current (AC) or one hundred and twenty-five (125) volts direct current (DC). The output voltage rating of this device is 5 volts direct current (DC), whereas the power rating of this adapter is 30 watts with a direct current output relay of 24 volts and a power capacity that is indicated as 15 watts. Similarly, the isolated output voltage is 24 volts direct current. This adapter belongs to the Series 90-30 product line. For communication purposes between the devices and other electrical components, this device features an RS-485 communication port.
To indicate for any error within the adaptor module or to show that the system is running as required, for these purposes, this module has a light emitting diode (LED) indicator. This LED indicator is labeled as PWR. Other features included with this device are a backup battery, as well as RAM for storage. This adaptor module functions alongside programmable logic controllers (PLCs). This device is capable of being mounted via a DIN rail. When storing this redundant power supply adapter, the temperature of the surrounding area should range from -40 to +85 degrees Celsius, or the equivalent range of -40 to +185 degrees Fahrenheit.
Question: Does Automation Stop offer repairs on the IC693ACC350?
Answer: Yes. We offer repairs for the IC693ACC350 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693ACC350?
Answer: If you buy the IC693ACC350 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693ACC350 online?
Answer: Yes. Automation Stop sells the IC693ACC350 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693ACC350?
Answer: The IC693ACC350 is made by Emerson - GE Fanuc.
For additional information about IC693ACC350 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693ACC350.
Revision Part # | Also Known As | Availability |
---|
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.