GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC693CBL313 |
Series: | Series 90-30 |
Description:
Product number IC693CBL313 is an I/O base expansion cable. This product, which was designed and manufactured by Emerson - GE Fanuc, belongs to the Series 90-30 product line. This cable is a Wye type cable that is used for daisy-chaining baseplates. The primary application of this cable is to interconnect CPU, expansion, and remote baseplates. This I/O base expansion cable has a length that measures 25 feet, or 8 meters.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number IC693CBL313 is a cable. More specifically, this cable is classified as an I/O base expansion cable. This product is a part of the Series 90-30 series of products. This expansion cable was designed and produced by the company known as Emerson - GE Fanuc. The cable type is Wye Cable. The primary application of this cable is daisy chain I/O expansion or remote base plates to CPU base plates. The length of this cable is twenty-five (25) feet, or the equivalent of eight (8) meters. A 25-pin single head male connector, as well as a dual head (one male, one female) 25-pin connector are the corresponding connector types. In addition to that, this cable is also protected with a wire shield. It is worth mentioning that this cable comes with a secure cable housing option, unlike some of its counterpart products from other series. This housing makes it flexible for mounting and assembly and ensures added safety for operators and the product itself. The manufacturer also provides twenty-eight (28) AWG (American Wire Gauge) size wire conducting material. Users should not know that the male connector on the double-head end is connected to the 25-pin female connector on the next expansion or remote baseplate. This cable was designed to be lightweight and was made using an excellent quality conducting material. As a result, its logistics, storage, and day to day plant-wide use are not only flexible, but also cost effective. The GE Fanuc IC693CBL313 I/O base expansion cable has been discontinued.
Question: Does Automation Stop offer repairs on the IC693CBL313?
Answer: Yes. We offer repairs for the IC693CBL313 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693CBL313?
Answer: If you buy the IC693CBL313 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693CBL313 online?
Answer: Yes. Automation Stop sells the IC693CBL313 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693CBL313?
Answer: The IC693CBL313 is made by Emerson - GE Fanuc.
For additional information about IC693CBL313 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693CBL313.
Revision Part # | Also Known As | Availability |
---|
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.