GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC200UAL006

✓ In Stock

IC200UAL006 Image 1 thumbnail
IC200UAL006 Image 2 thumbnail
IC200UAL006 Image 3 thumbnail
IC200UAL006 Image 4 thumbnail
IC200UAL006 Image 5 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC200UAL006
Series: Versamax Micro
UPC: 799705802506

Description:

The GE Fanuc Emerson IC200UAL006 is a VersaMax microcontroller that provides thirteen (13) DC discrete inputs, two (2) analog inputs, a single discrete and analog output, and nine (9) relay outputs. The microcontroller discrete inputs support an input voltage range from zero (0) to 30 Volts DC with an input current of 7.5 milliamperes. The microcontroller analog inputs can be employed in either voltage or current mode. The IC200UAL006 includes four (4) counters. The IC200UAL006 weighs approximately 730 grams (1.6 pounds) while shipping.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC200UAL006 is a VersaMax PLC microcontroller that provides thirteen (13) DC discrete inputs, two (2) analog inputs, a single discrete and analog output, and nine (9) NO relay outputs. The microcontroller discrete inputs support an input voltage range from zero (0) to 30 Volts DC with an input current of 7.5 milliamperes. The microcontroller discrete outputs can control either 5 Volts DC to 30 Volts DC or 5 Volts AC to 250 Volts AC output devices. The IC200UAL006 relay outputs deliver an output current of 0.75 Amperes. The microcontroller analog inputs can be set in either voltage or current mode. The microcontroller analog inputs/outputs support a current range from 4 milliamperes to 20 milliamperes or from 0 milliamperes to 20 milliamperes and a voltage range from zero (0) to 10 Volts DC.

The IC200UAL006 supports an input power supply of 100 Volts AC to 240 Volts AC. This micro PLC module contains RS-485 and RS-232 serial ports. The IC200UAL006 includes four (4) high-speed counters that offer a maximum frequency of 10 kilohertz and count registers of 16 bits. These micro PLC counters offer the pulse operation with a duty cycle of 20 percent to 80 percent at a frequency of 10-kilohertz to be employed in the industrial field such as flow meter and process control applications. The microcontroller relay outputs can be set as counter outputs. This micro PLC module has an input impedance of 2.8 kiloohms. This module has a response time of 0.5 milliseconds to 20 milliseconds that can be configured through the software. The IC200UAL006 weighs approximately 730 grams (1.6 pounds) while shipping.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series Versamax
Part Number IC200UAL006
Description (13) 24 VDC inputs, (1) 24 VDC output, (9) Relay outputs, (2) Analog inputs, (1) Analog output, 120/220 VAC power supply, VersaMax PLC microcontroller
Inputs 13 DC inputs and 2 Analog inputs
Outputs 1 DC output, 9 relay outputs, 1 analog output
High-Speed Counters Up to four Type A or one Type A and one Type B
Output Power Supplies 200 mA maximum
Input Current 0.13 Ampere typical at 200 VAC, 0.20 Ampere typical at 100 VAC
Input Voltage Range 0 to 30 volts DC
Output DC Voltage / Relay Output Voltage 24 VDC/5 to 30 VDC or 5 to 250 VAC
Maximum Counter Frequency 10 kHz
Count Pulse Width 20% to 80% duty cycle at 10 kHz
Count Registers 16 bits
Weight 730 g (1.60 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC200UAL006?

Answer: Yes. We offer repairs for the IC200UAL006 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC200UAL006?

Answer: If you buy the IC200UAL006 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC200UAL006 online?

Answer: Yes. Automation Stop sells the IC200UAL006 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC200UAL006?

Answer: The IC200UAL006 is made by Emerson - GE Fanuc.


Question: What Brand does the IC200UAL006 have?

Answer: The Allen Bradley Automation IC200UAL006 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What is the Count Pulse Width of the IC200UAL006?

Answer: The Count Pulse Width of the IC200UAL006 is 20% to 80% duty cycle at 10 kHz.


Question: What is the Count Registers of the IC200UAL006?

Answer: The Count Registers of the Allen-Bradley IC200UAL006 is 16 bits.


Question: What is the Description of the IC200UAL006?

Answer: The Description of the Allen Bradley IC200UAL006 is (13) 24 VDC inputs, (1) 24 VDC output, (9) Relay outputs, (2) Analog inputs, (1) Analog output, 120/220 voltage alternating current (VAC) power supply component, VersaMax PLC microcontroller .


Question: What High-Speed Counters are included with the Rockwell-Automation IC200UAL006?

Answer: The Rockwell-Automation IC200UAL006 has High-Speed Counters Up to four Type A or one Type A and one Type B.


Question: What Input Current does the Allen Bradley Automation IC200UAL006 have?

Answer: The IC200UAL006 has a Input Current of 0.13 Ampere typical at 200 VAC (voltage alternating current), 0.20 Ampere typical at 100 VAC (voltage alternating current).


Question: What is the Input Voltage Range of the IC200UAL006?

Answer: The Input Voltage Range of the IC200UAL006 is 0 to 30 volts direct current.


Question: What Inputs does the IC200UAL006 have?

Answer: The IC200UAL006 has a Inputs of 13 direct current inputs and 2 Analog inputs.


Question: What is the Maximum Counter Frequency of the Allen Bradley-Rockwell Automation IC200UAL006?

Answer: The IC200UAL006 has a Maximum Counter Frequency of 10 kHz.


Question: What is the Output DC (direct current) Voltage / Relay Output Voltage of the IC200UAL006?

Answer: The Output DC Voltage / Relay Output Voltage of the IC200UAL006 is 24 VDC/5 to 30 VDC or 5 to 250 VAC (voltage alternating current).


Question: What is the Output Power Supplies of the IC200UAL006?

Answer: The Allen Bradley IC200UAL006 has a Output Power Supplies of 200 mA maximum.


Question: What is the Outputs of the IC200UAL006?

Answer: The Allen Bradley/Rockwell Automation IC200UAL006 has a Outputs of 1 DC (direct current) output, 9 relay outputs, 1 analog output.


Question: What is the unit Number of the IC200UAL006?

Answer: The part Number of the Allen Bradley-Rockwell Automation IC200UAL006 is IC200UAL006.


Question: What Weight does the Allen Bradley/Rockwell Automation IC200UAL006 have?

Answer: The Weight of the IC200UAL006 is 730 g (1.60 lb) .


Series information for IC200UAL006

For additional information about IC200UAL006 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200UAL006.

Revision Part # Also Known As Availability
IC200UAL006-AA IC200UAL006 Series AA, Rev AA Request a Quote
IC200UAL006-BA IC200UAL006 Series BA, Rev BA Request a Quote
IC200UAL006-DJ IC200UAL006 Series DJ, Rev DJ Request a Quote
IC200UAL006-EL IC200UAL006 Series EL, Rev EL Request a Quote
IC200UAL006-FL IC200UAL006 Series FL, Rev FL Request a Quote

Common Misspellings:

  • IC200UAL00G
  • IC200UAL0O6
  • IC200UAL0OG
  • IC200UALO06
  • IC200UALO0G
  • IC200UALOO6
  • IC200UALOOG
  • IC20OUAL006
  • IC20OUAL00G
  • IC20OUAL0O6
  • IC20OUAL0OG
  • IC20OUALO06
  • IC20OUALO0G
  • IC20OUALOO6
  • IC20OUALOOG
  • IC2O0UAL006
  • IC2O0UAL00G
  • IC2O0UAL0O6
  • IC2O0UAL0OG
  • IC2O0UALO06
  • IC2O0UALO0G
  • IC2O0UALOO6
  • IC2O0UALOOG
  • IC2OOUAL006
  • IC2OOUAL00G
  • IC2OOUAL0O6
  • IC2OOUAL0OG
  • IC2OOUALO06
  • IC2OOUALO0G
  • IC2OOUALOO6
  • IC2OOUALOOG
  • 1C200UAL006
  • 1C200UAL00G
  • 1C200UAL0O6
  • 1C200UAL0OG
  • 1C200UALO06
  • 1C200UALO0G
  • 1C200UALOO6
  • 1C200UALOOG
  • 1C20OUAL006
  • 1C20OUAL00G
  • 1C20OUAL0O6
  • 1C20OUAL0OG
  • 1C20OUALO06
  • 1C20OUALO0G
  • 1C20OUALOO6
  • 1C20OUALOOG
  • 1C2O0UAL006
  • 1C2O0UAL00G
  • 1C2O0UAL0O6
  • 1C2O0UAL0OG
  • 1C2O0UALO06
  • 1C2O0UALO0G
  • 1C2O0UALOO6
  • 1C2O0UALOOG
  • 1C2OOUAL006
  • 1C2OOUAL00G
  • 1C2OOUAL0O6
  • 1C2OOUAL0OG
  • 1C2OOUALO06
  • 1C2OOUALO0G
  • 1C2OOUALOO6
  • 1C2OOUALOOG

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP