GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC200UDR040 |
Series: | Versamax Micro |
UPC: | 743990081665 |
Description:
The IC200UDR040 is a VersaMax 40-Point Micro PLC by GE Fanuc. It has 24 24-Volt DC positive/negative logic input circuits and 16 normally open 2-Ampere relay circuits. This hardware has a frequency of 50-5% to 60+5% Hertz.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC200UDR040 by GE Fanuc is a VersaMax 40-Point Micro PLC. It has 24 24-Volt DC positive/negative logic input circuits and 16 normally open 2-Ampere relay circuits. The IC200UDR040 has a frequency of 50-5% to 60+5% Hertz and a +24 Volt DC output power supply of 435 milliamperes maximum (for input circuits and user devices). Power supply specifications for the IC200UDR040 include a range of 19.2 Volts DC to 30 Volts DC and a hold-up of 10 milliseconds at 19.2 Volts DC. Inrush current is 1 Ampere maximum at 30 Volts DC, while inrush time is 10 milliseconds for 1 Ampere; input current is 0.20 Amperes typical at 24 Volts DC. The input power supply rating for the IC200UDR040 is 5 Watts.
DC input specifications for the IC200UDR040 include a rated input voltage of 24 Volts DC and an input voltage range of 0 to 30 Volts DC. It has a response time of 1 millisecond to 20 milliseconds configurable as regular input; 100 µs as HSC input. The IC200UDR040 has an isolation voltage of 1500 Volts RMS field side to logic side, 500 Volts RMS between groups. High-speed counter input and output specifications include a maximum counter frequency of 100 kiloHertz and an input voltage of 18 Volts (on) and 5 Volts (off). Count pulse width is 20% to 80% of duty cycle at 100 kiloHertz, while count registers is 16/32 bits. Relay output specifications for the IC200UDR040 include an operating voltage of 5 to 30 Volts DC or 5 to 250 Volts AC; leakage current is 15 milliamperes at 240 Volts AC maximum, while maximum UL pilot duty rating is 2 Amperes at 24 Volts DC and 240 Volts AC. The IC200UDR040 has a maximum resistive load rating of 2 Amperes at 24 Volts DC and 240 Volts AC. It has a minimum load of 10 milliamperes.
Brand: | GE Fanuc |
Inputs: | 24 |
Outputs: | 16 |
Frequency: | 50-5% to 60+5% Hertz |
#ERROR! | 435 Milliamperes Maximum |
Range: | 19.2 Volts DC to 30 Volts DC |
Hold-Up: | 10 milliseconds at 19.2 Volts DC |
Inrush Current: | 1 Ampere (maximum) at 30 Volts DC |
Inrush Time: | 10 milliseconds for 1 Ampere |
Input Current: | 0.20 Amperes Typical at 24 Volts DC |
Input Power Supply Rating: | 5 Watts |
Rated Input Voltage: | 24 Volts DC |
Input Voltage Range: | 0 to 30 Volts DC |
Response Time: | 1 Millisecond to 20 Milliseconds |
Isolation Voltage: | 1500 Volts RMS field side to logic side, 500 Volts RMS between groups |
Maximum Counter Frequency: | 100 kiloHertz |
Input Voltage: | 18 Volts (On), 5 Volts (Off) |
Count Pulse Width: | 20% to 80% of Duty Cycle at 100 kiloHertz |
Count Registers: | 16/32 bits |
Question: Does Automation Stop offer repairs on the IC200UDR040?
Answer: Yes. We offer repairs for the IC200UDR040 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200UDR040?
Answer: If you buy the IC200UDR040 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200UDR040 online?
Answer: Yes. Automation Stop sells the IC200UDR040 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200UDR040?
Answer: The IC200UDR040 is made by Emerson - GE Fanuc.
Question: What #ERROR! does the IC200UDR040 have?
Answer: The IC200UDR040 has a #ERROR! of 435 Milliamperes Maximum.
Question: What Brand: does the Allen Bradley-Rockwell Automation IC200UDR040 have?
Answer: The IC200UDR040 has a GE Fanuc Brand:.
Question: What is the Count Pulse Width: of the Rockwell-Automation IC200UDR040?
Answer: The Rockwell-Automation IC200UDR040 has a Count Pulse Width: of 20% to 80% of Duty Cycle at 100 kiloHertz.
Question: What Count Registers: does the Allen Bradley IC200UDR040 have?
Answer: The Count Registers: of the IC200UDR040 is 16/32 bits.
Question: What is the Frequency: of the IC200UDR040?
Answer: The Frequency: of the Allen Bradley/Rockwell Automation IC200UDR040 is 50-5% to 60+5% Hertz.
Question: What is the Hold-Up: of the Allen Bradley/Rockwell Automation IC200UDR040?
Answer: The IC200UDR040 has a Hold-Up: of 10 milliseconds at 19.2 Volts direct current (DC).
Question: What is the Input Current: of the IC200UDR040?
Answer: The Input Current: of the IC200UDR040 is 0.20 Amperes Typical at 24 Volts direct current (DC).
Question: What is the Input power supply unit Rating: of the IC200UDR040?
Answer: The Input power supply Rating: of the IC200UDR040 is 5 Watts.
Question: What Input Voltage Range: does the IC200UDR040 have?
Answer: The IC200UDR040 has a Input Voltage Range: of 0 to 30 Volts DC (direct current).
Question: What is the Input Voltage: of the IC200UDR040?
Answer: The IC200UDR040 has a Input Voltage: of 18 Volts (On), 5 Volts (Off).
Question: What is the Inputs: of the IC200UDR040?
Answer: The Inputs: of the Allen-Bradley IC200UDR040 is 24.
Question: What is the Inrush Current: of the IC200UDR040?
Answer: The Allen Bradley IC200UDR040 has a Inrush Current: of 1 Ampere (maximum) at 30 Volts DC (direct current).
Question: What Inrush Time: does the Rockwell Automation IC200UDR040 have?
Answer: The IC200UDR040 has a Inrush Time: of 10 milliseconds for 1 Ampere.
Question: What is the Isolation Voltage: of the IC200UDR040?
Answer: The Isolation Voltage: of the IC200UDR040 is 1500 Volts RMS field side to logic side, 500 Volts RMS between groups.
Question: What Maximum Counter Frequency: does the Allen-Bradley IC200UDR040 have?
Answer: The IC200UDR040 has a Maximum Counter Frequency: of 100 kiloHertz.
Question: What Outputs: does the IC200UDR040 have?
Answer: The IC200UDR040 has a Outputs: of 16.
Question: What is the Range: of the IC200UDR040?
Answer: The IC200UDR040 has a Range: of 19.2 Volts direct current (DC) to 30 Volts direct current (DC).
Question: What Rated Input Voltage: does the IC200UDR040 have?
Answer: The Rated Input Voltage: of the Allen Bradley Automation IC200UDR040 is 24 Volts DC (direct current).
Question: What Response Time: does the IC200UDR040 have?
Answer: The Response Time: of the Allen Bradley/Rockwell Automation IC200UDR040 is 1 Millisecond to 20 Milliseconds.
For additional information about IC200UDR040 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200UDR040.
Revision Part # | Also Known As | Availability |
---|---|---|
IC200UDR040-DF | IC200UDR040 Series DF, Rev DF | Request a Quote |
IC200UDR040-EF | IC200UDR040 Series EF, Rev EF | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.