GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC200ALG321

✓ In Stock

IC200ALG321 Image 1 thumbnail
IC200ALG321 Image 2 thumbnail
IC200ALG321 Image 3 thumbnail
IC200ALG321 Image 4 thumbnail
IC200ALG321 Image 5 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC200ALG321
Series: Versamax
UPC: 384413704435

Description:

The GE Fanuc Emerson IC200ALG321 is an analog voltage output module. This module provides four (4) channels. The module offers a single output voltage range. The IC200ALG321 weighs approximately 180 grams (0.39 pounds) while shipping.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC200ALG321 is an analog voltage output module. This module provides four (4) single-ended channels with a scan time of 0.3 milliseconds that can convert a discrete signal of 12 bits to an analog voltage signal. The module offers a single output voltage range: from 0 volts DC to 10 volts DC with a resolution of 2.5 millivolts. This module draws a current of 50 milliamperes at a voltage of +5 volts DC. The IC200ALG321 has two LED indicators on the front panel to show the power state of this module. This output module receives an output data length of four words. The processing can be performed by either NIU or a CPU.

The IC200ALG321 employs the backplane optical isolation offered by optocouplers to provide electrical isolation of 250 volts AC continuously and 1500 volts AC for one minute between the backplane and wires. The module can be easily mounted on expansion racks. This unit can be employed with the VersaMax initial release of NIUs and CPUs. The output module state can be easily set using the jumper located in the detachable terminal circuit connector. The device offers the possibility to the user or the operator to employ an external power supply to power both the module and the outputs with a voltage range from 18 volts DC to 30 volts DC. The IC200ALG321 weighs approximately 180 grams (0.39 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series VersaMax
Part Number IC200ALG321
Description Analog voltage output module
Number of channels 4 single-ended, one group
Load requirement 50 mA @ +5 VDC
D/A resolution 12 bits
Number of output range 1
Isolation : User input to logic (optical) and to frame ground 250VAC continuous; 1500VAC for 1 minute
Output voltage range 0 to 10.24VDC
External power supply +18 to +30VDC / Current: 160 mA
Resolution 2.5mV = 8 counts
Analog update rate 0.3 milliseconds
Weight 180 g (0.39 lb.)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC200ALG321?

Answer: Yes. We offer repairs for the IC200ALG321 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC200ALG321?

Answer: If you buy the IC200ALG321 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC200ALG321 online?

Answer: Yes. Automation Stop sells the IC200ALG321 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC200ALG321?

Answer: The IC200ALG321 is made by Emerson - GE Fanuc.


Question: What Analog update rate does the Allen Bradley IC200ALG321 have?

Answer: The IC200ALG321 has a Analog update rate of 0.3 milliseconds.


Question: What Brand does the IC200ALG321 have?

Answer: The Allen Bradley Automation IC200ALG321 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What is the D/A resolution of the IC200ALG321?

Answer: The D/A resolution of the Rockwell-Automation IC200ALG321 is 12 bits.


Question: What Description does the IC200ALG321 have?

Answer: The IC200ALG321 has a Analog voltage output module Description.


Question: What is the External power supply unit of the IC200ALG321?

Answer: The Rockwell Automation IC200ALG321 has a External power supply of +18 to +30VDC / Current: 160 mA.


Question: What Isolation : User input to logic (optical) and to frame ground does the Rockwell-Automation IC200ALG321 have?

Answer: The Isolation : User input to logic (optical) and to frame ground of the Rockwell-Automation IC200ALG321 is 250VAC continuous; 1500VAC for 1 minute.


Question: What is the Load requirement of the IC200ALG321?

Answer: The Load requirement of the Allen Bradley IC200ALG321 is 50 mA @ +5 VDC.


Question: What is the Number of channels of the IC200ALG321?

Answer: The Allen Bradley Automation IC200ALG321 has a Number of channels of 4 single-ended, one group.


Question: What is the Number of output range of the IC200ALG321?

Answer: The Number of output range of the Allen Bradley Automation IC200ALG321 is 1.


Question: What is the Output voltage range of the Allen Bradley-Rockwell Automation IC200ALG321?

Answer: The Output voltage range of the Allen Bradley-Rockwell Automation IC200ALG321 is 0 to 10.24VDC.


Question: What is the part Number of the IC200ALG321?

Answer: The Allen Bradley/Rockwell Automation IC200ALG321 has a part Number of IC200ALG321.


Question: What Resolution does the IC200ALG321 have?

Answer: The Resolution of the IC200ALG321 is 2.5mV = 8 counts.


Question: What is the Weight of the IC200ALG321?

Answer: The IC200ALG321 has a Weight of 180 g (0.39 lb.).


Series information for IC200ALG321

For additional information about IC200ALG321 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200ALG321.

Revision Part # Also Known As Availability
IC200ALG321F IC200ALG321 Series F, Rev F Request a Quote
IC200ALG321G IC200ALG321 Series G, Rev G Request a Quote
IC200ALG321J IC200ALG321 Series J, Rev J Request a Quote
IC200ALG321K IC200ALG321 Series K, Rev K Request a Quote

Common Misspellings:

  • IC200ALG32I
  • IC200AL6321
  • IC200AL632I
  • IC20OALG321
  • IC20OALG32I
  • IC20OAL6321
  • IC20OAL632I
  • IC2O0ALG321
  • IC2O0ALG32I
  • IC2O0AL6321
  • IC2O0AL632I
  • IC2OOALG321
  • IC2OOALG32I
  • IC2OOAL6321
  • IC2OOAL632I
  • 1C200ALG321
  • 1C200ALG32I
  • 1C200AL6321
  • 1C200AL632I
  • 1C20OALG321
  • 1C20OALG32I
  • 1C20OAL6321
  • 1C20OAL632I
  • 1C2O0ALG321
  • 1C2O0ALG32I
  • 1C2O0AL6321
  • 1C2O0AL632I
  • 1C2OOALG321
  • 1C2OOALG32I
  • 1C2OOAL6321
  • 1C2OOAL632I

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP