GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Horner Electric |
Product Type: | Automation Product |
Part Number: | HE693RLY110 |
Series: | PLC I/O |
UPC: | 916619564324 |
Description:
Designed and manufactured by Horner Electric, product number HE693RLY110 is a relay output module. This device has eight (8) isolated discrete outputs. This module has an operating voltage rated at 12 to 265 volts AC or 12 to 30 volts DC. It has an AC frequency range of 47 to 63 hertz. The maximum current per output of this module is 8 amperes. Additionally, the maximum total current is 50 amperes. This device has an operating temperature that should range from 0 to 60 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number HE693RLY110 is a relay output module that was designed and produced by Horner Electric. This module aids users by adding eight (8) high-current relay outputs to the GE Fanuc Series 90TM-30 PLCs, or programmable logic controllers. Each output is fused and completely isolated from the others. This device has an operating voltage of twelve (12) to two hundred and sixty-five (265) volts alternating current (AC), or twelve (12) to thirty (30) volts direct current (DC). The alternating current (AC) frequency range of this Horner Electric device is forty-seven (47) to sixty-three (63) hertz. Because the outputs are dry contacts, you can use a variety of voltage types and levels at the same time. The outputs are also high current, delivering up to eight (8) amperes per circuit, for a total current of fifty (50) amperes per module. This module eliminates the need for costly isolation relay and wiring, which adds to its desirability and cost justification. This isolated relay output module is built with low-power CMOS technology. The Series 90-30 rack power supply provides the five (5) volts direct current (DC) and twenty-four (24) volts direct current (DC) power required to operate the module. The module consumes one hundred and fifty (150) milliamperes at twenty-four (24) volts direct current (DC) and fifty (50) milliamperes at five (5) volts direct current (DC). This design includes eight (8) mechanical relays that allow each circuit to be isolated. The user field wiring is connected to a removable terminal strip on the faceplate of the module.
Question: Does Automation Stop offer repairs on the HE693RLY110?
Answer: Yes. We offer repairs for the HE693RLY110 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Horner Electric and HE693RLY110?
Answer: If you buy the HE693RLY110 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the HE693RLY110 online?
Answer: Yes. Automation Stop sells the HE693RLY110 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the HE693RLY110?
Answer: The HE693RLY110 is made by Horner Electric.
Question: What amperage is included with the Horner Electric HE693RLY110?
Answer: The HE693RLY110 has a amperage of 8.
For additional information about HE693RLY110 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding HE693RLY110.
Revision Part # | Also Known As | Availability |
---|---|---|
HE693RLY110A | HE693RLY110 Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.