GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Horner Electric |
Product Type: | Automation Product |
Part Number: | HE693STP300 |
Series: | PLC I/O |
UPC: | 439849580563 |
Description:
Part number HE693STP300 is a three-axis indexer module. This module was designed and manufactured by Horner Electric. This module was designed to be used in tandem with programmable logic controllers from the Series 90-30 product line by Emerson - GE Fanuc. This module has a direction setup time of 2 milliseconds minimum, as well as a direction power output of 300 milliamperes at 5 volts. The operating temperature of this device should range from 0 to 60 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The HE693STP300 is a three-axis indexer module. This module was designed and manufactured by Horner Electric. This module is mainly applicable with the Series 90–30 programmable logic controllers (PLCs) that belong to Emerson - GE Fanuc. Its main function is to control a single or multiple linear motions or rotary motions as it functions together with other feedback devices. The output setup time for the direction is 2 milliseconds at minimum and the direction power output is a maximum of 300 milliamperes at 5 volts. The output frequency for Step is rated at 245 kilohertz.
For the encoder, the input frequency is rated at 1.0 mHz, whereas its single ended threshold lies between 1.2 volts to 1.6 volts at a direct current (DC) phase and differential threshold is between -0.2 volts and 0.2 volts similarly direct current phase. The home inputs at the OFF state is given as 12 volts direct current (DC) and the home inputs at ON state with a current flow rating of 1 milliamperes is 9 volts. For the input of an emergency stop at the ON state is 12 volts DC whereas the OFF state with 1 milliampere current flowing through the circuit is 9 volts DC. This module has an operating temperature that should remain within a range of 0 to 60 degrees Celsius. Additionally, the relative humidity of the surrounding area should have levels ranging from five (5) percent to ninety-five (95) percent. This module has a wide position control range that makes it suitable for micro-stepping translator drive, therefore, reducing the noise during operation.
Question: Does Automation Stop offer repairs on the HE693STP300?
Answer: Yes. We offer repairs for the HE693STP300 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Horner Electric and HE693STP300?
Answer: If you buy the HE693STP300 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the HE693STP300 online?
Answer: Yes. Automation Stop sells the HE693STP300 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the HE693STP300?
Answer: The HE693STP300 is made by Horner Electric.
For additional information about HE693STP300 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding HE693STP300.
Revision Part # | Also Known As | Availability |
---|
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.