GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Horner Electric |
Product Type: | Automation Product |
Part Number: | HE697RTM700 |
Series: | PLC I/O |
UPC: | 534572246066 |
Description:
The Horner HE697RTM700 is a communication module that permits communication with RTU/Modbus networks. This module includes two independent ports. These ports can be configured as either a Modbus master or a slave. The HE697RTM700 can be easily mounted on a single local slot. This module is compatible with Series 90-70 CPUs. This module can be monitored by the 90-70 CPU to have access to data from remote slave RTU?s.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Horner HE697RTM700 is a communication module that permits communication with RTU/Modbus networks. This module includes two independent ports. These ports can be configured as either a Modbus master or a slave. The HE697RTM700 can be easily mounted on a single local slot. This module is compatible with Series 90-70 CPUs. This device can be monitored by the 90-70 CPU to have access to data from remote slave RTU’s. The HE697RTM700 channels can be individually employed for direct connection (RS-232), multi-drop (RS422/RS485), radio modem, dial in, dial out function. The module channels can either transmit or receive analog or discrete data employing standard and specific RTU commands with a maximum data size of 250 bytes that are located in CPU reference data tables.
The HE697RTM700 supports the report-by-exception feature. This module offers in either RS422/RS485 or RS232 mode with a baud rate of 19.2 kilobauds. The HE697RTM700 supports stop, handshaking, parity bits, and 7-bit or 8-bit RTU transfer. This module draws a current of 1 ampere at a backplane voltage of +5 volts DC. The HE697RTM700 contains three LED indicators on the faceplate to show the module status and to help the issue troubleshooting. This module can be configured employing PCM Logicmaster devices. The device includes a 25-pin D-sub connector for each port. This Horner module supports RTU/Modbus communication protocol. The HE697RTM700 weighs approximately 450 grams (0.99 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.
Brand | Horner Automation |
Series | RTM700 |
Part Number | HE697RTM700 |
Description | Modbus/RTU communication module |
Communication ports | 2 |
Protocol supported | Modbus |
Supported networks | Modbus/RTU |
System requirement | Series 90-70 CPU |
Power requirement | 1000mA @5VDC |
Number of LEDs | 3 |
LED indicators | MODULE OK, USER 1 (port 1), and USER 2 (port 2) |
Mounting location | Series 90-70 local slot |
Connector type | 25-pin D-sub |
Operating Temperature | 0°C to 60°C (32°F to 140°F) |
Weight | 450 g (0.99 lb) |
Question: Does Automation Stop offer repairs on the HE697RTM700?
Answer: Yes. We offer repairs for the HE697RTM700 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Horner Electric and HE697RTM700?
Answer: If you buy the HE697RTM700 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the HE697RTM700 online?
Answer: Yes. Automation Stop sells the HE697RTM700 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the HE697RTM700?
Answer: The HE697RTM700 is made by Horner Electric.
Question: What Brand does the Allen Bradley HE697RTM700 have?
Answer: The HE697RTM700 has a Horner Automation Brand.
Question: What is the Communication ports of the Allen Bradley Automation HE697RTM700?
Answer: The Communication ports of the Allen Bradley Automation HE697RTM700 is 2.
Question: What is the Connector type of the HE697RTM700?
Answer: The HE697RTM700 has a Connector type of 25-pin D-sub.
Question: What Description is included with the Rockwell Automation HE697RTM700?
Answer: The Rockwell Automation HE697RTM700 has a Modbus/RTU communication module Description.
Question: What LED indicators does the Rockwell-Automation HE697RTM700 have?
Answer: The LED indicators of the Rockwell-Automation HE697RTM700 is MODULE OK, USER 1 (port 1), and USER 2 (port 2).
Question: What is the Mounting location of the HE697RTM700?
Answer: The HE697RTM700 has a Mounting location of Series 90-70 local slot.
Question: What is the Number of LEDs of the Rockwell-Automation HE697RTM700?
Answer: The Number of LEDs of the HE697RTM700 is 3.
Question: What Operating Temperature does the Allen Bradley/Rockwell Automation HE697RTM700 have?
Answer: The Operating Temperature of the HE697RTM700 is 0°C to 60°C (32°F to 140°F).
Question: What is the component Number of the Allen Bradley-Rockwell Automation HE697RTM700?
Answer: The component Number of the HE697RTM700 is HE697RTM700.
Question: What Power requirement does the HE697RTM700 have?
Answer: The Allen Bradley/Rockwell Automation HE697RTM700 has a Power requirement of 1000mA @5VDC.
Question: What Protocol supported is included with the HE697RTM700?
Answer: The Allen Bradley HE697RTM700 has a Modbus Protocol supported.
Question: What kind of Supported networks does the HE697RTM700 have?
Answer: The Rockwell-Automation HE697RTM700 includes Modbus/RTU for its Supported networks.
Question: What is the System requirement of the HE697RTM700?
Answer: The System requirement of the HE697RTM700 is Series 90-70 central processing unit (CPU).
Question: What Weight does the HE697RTM700 have?
Answer: The Allen-Bradley HE697RTM700 has a Weight of 450 g (0.99 lb).
For additional information about HE697RTM700 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding HE697RTM700.
Revision Part # | Also Known As | Availability |
---|---|---|
HE697RTM700B | HE697RTM700 Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.