GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Allen Bradley - Miscellaneous |
| Product Type: | Automation Product |
| Part Number: | 150-F361NBD |
| Series: | SMC-Flex |
Description:
The Allen-Bradley 150-F361NBD is a SMC Flex Smart Motor Controller. This motor controller has a line voltage of 200 - 460 volts AC (alternating current), three phase, 50 and 60 Hz frequency and a control voltage of 100 - 240 volts. It delivers a maximum continuous output current of 361 amperes and an output power of 500 horsepower at a 460 volt AC rated voltage. It has an open type enclosure.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 150-F361NBD is a variable speed motor controller which has input line voltage requirement of two hundred to four hundred and sixty (200-460) volts alternating current (AC) with three phases, a 50 and 60 hertz (Hz) frequency, and a control voltage of one hundred to two hundred and forty (100 to 240) volts AC. Output current rate is 361 amperes with rated power of 300 HP at 460VAC or 500 HP at 460VAC (delta connection). This a heavy duty industrial drive for also hard to drive loads. The drive can use many control methods, such as soft start/stop (which is usually used), current limit start, selectable kick start, preset slow speed, and coast-to-rest, as well as many other methods not stated. The slow speed motion has many presets and options available, especially those that are pump oriented. During the starting and normal running modes, the controller microcomputer monitors the possible fault conditions, such as start fault, line fault, temperature fault, and stalled motor fault and if any of the conditions exist, the controller shut down the output voltage and turns the appropriate alarm LEDs on. There are also many other faults but all of them can be monitored by integrated LEDs or by display on the front side. For the programming parameters purpose, the handheld device is used. The operating temperature range for this product is 0 to 50 degrees Celsius and the storage temperature range is -20 to +75 degrees Celsius. This drive is mounted with an open enclosure.
Technical Specifications
| MPN | 150-F361NBD |
| Manufacturer | Allen Bradley / Rockwell Automation |
| Series | SMC - Flex Controller |
| Dimension - Width | 290 (11.42) |
| Dimension - Height | 600 (23.62) |
| Dimension - Depth | 276.5 (10.89) |
| Dimension - Approx Ship. Wt. | 45.8 (101) |
| Amps | 361 |
| HP | 300 HP @ 460V AC |
| Enclosure Type | Open |
| Input Line Voltage | 200...460V AC, 3-Phase, 50 and 60 Hz |
| Voltage | 100...240V AC (5...480 A units) |
FAQ
Question: Does Automation Stop offer repairs on the 150-F361NBD?
Answer: Yes. We offer repairs for the 150-F361NBD and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 150-F361NBD?
Answer: If you buy the 150-F361NBD through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 150-F361NBD online?
Answer: Yes. Automation Stop sells the 150-F361NBD online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 150-F361NBD?
Answer: The 150-F361NBD is made by Allen Bradley - Miscellaneous.
Question: What type of product is the 150-F361NBD?
Answer: The 150-F361NBD is part of the SMC-Flex series.
Question: What is the amperes of the 150-F361NBD?
Answer: The 150-F361NBD has a amperes of 361.
Question: What Dimension - Approx Ship. Wt. does the 150-F361NBD have?
Answer: The 150-F361NBD has a Dimension - Approx Ship. Wt. of 45.8 (101).
Question: What Dimension - Depth does the Allen-Bradley 150-F361NBD have?
Answer: The 150-F361NBD has a Dimension - Depth of 276.5 (10.89).
Question: What is the Dimension - Height of the 150-F361NBD?
Answer: The 150-F361NBD has a Dimension - Height of 600 (23.62).
Question: What is the Dimension - Width of the Allen Bradley 150-F361NBD?
Answer: The Dimension - Width of the Allen Bradley 150-F361NBD is 290 (11.42).
Question: What Enclosure Type is included with the 150-F361NBD?
Answer: The Allen Bradley-Rockwell Automation 150-F361NBD has a Open Enclosure Type.
Question: What is the HP of the Allen Bradley 150-F361NBD?
Answer: The HP of the Allen Bradley 150-F361NBD is 300 HP @ 460 volts AC (alternating current).
Question: What is the Input Line Voltage of the 150-F361NBD?
Answer: The Input Line Voltage of the Allen-Bradley 150-F361NBD is 200...460 volts AC (alternating current), 3-Phase, 50 and 60 Hz.
Question: What is the Voltage of the 150-F361NBD?
Answer: The Voltage of the Rockwell Automation 150-F361NBD is 100...240 volts alternating current (AC) (5...480 A units).
Series information for 150-F361NBD
For additional information about 150-F361NBD check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 150-F361NBD.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| 150-F361NBD/A | 150-F361NBD Ser A, Series A, Rev A | Request a Quote |
| 150-F361NBD/B | 150-F361NBD Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
- 150-F361N8D
- 150-F36INBD
- 150-F36IN8D
- 150-F3G1NBD
- 150-F3G1N8D
- 150-F3GINBD
- 150-F3GIN8D
- 15O-F361NBD
- 15O-F361N8D
- 15O-F36INBD
- 15O-F36IN8D
- 15O-F3G1NBD
- 15O-F3G1N8D
- 15O-F3GINBD
- 15O-F3GIN8D
- 1S0-F361NBD
- 1S0-F361N8D
- 1S0-F36INBD
- 1S0-F36IN8D
- 1S0-F3G1NBD
- 1S0-F3G1N8D
- 1S0-F3GINBD
- 1S0-F3GIN8D
- 1SO-F361NBD
- 1SO-F361N8D
- 1SO-F36INBD
- 1SO-F36IN8D
- 1SO-F3G1NBD
- 1SO-F3G1N8D
- 1SO-F3GINBD
- 1SO-F3GIN8D
- I50-F361NBD
- I50-F361N8D
- I50-F36INBD
- I50-F36IN8D
- I50-F3G1NBD
- I50-F3G1N8D
- I50-F3GINBD
- I50-F3GIN8D
- I5O-F361NBD
- I5O-F361N8D
- I5O-F36INBD
- I5O-F36IN8D
- I5O-F3G1NBD
- I5O-F3G1N8D
- I5O-F3GINBD
- I5O-F3GIN8D
- IS0-F361NBD
- IS0-F361N8D
- IS0-F36INBD
- IS0-F36IN8D
- IS0-F3G1NBD
- IS0-F3G1N8D
- IS0-F3GINBD
- IS0-F3GIN8D
- ISO-F361NBD
- ISO-F361N8D
- ISO-F36INBD
- ISO-F36IN8D
- ISO-F3G1NBD
- ISO-F3G1N8D
- ISO-F3GINBD
- ISO-F3GIN8D
