GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Allen Bradley - Drives

1336 PLUS II Drives

The 1336 PLUS II by Allen Bradley provides adjustable frequency AC drives that provide ratings from 0.37-448 kW (0.5-600 HP) in three different voltage ranges of 200-240V AC, 380-480V AC, and 500-600V AC. Throughout this family of drives, simplicity in the designing and programming is consistent with an easy-to-read display, easy programming parameters, simple tuning, serial communication, common assembly parts, and compact packaging. Some special functions that can be found in the 1336 PLUS II drives are Auto Economizer, process PI controller, traverse function, selectable fault reset & run, auto restart on power up, speed sensitive electronic overload, auto-tuning, and step logic. The drive operations include Sensor-less vector control, selectable volts/hertz mode, and multi-lingual selection. The sensorless vector control system gives the drives a background of powerful algorithms, handling tough applications that other drives can’t. Both sensorless vector control and V/Hz mode provide outstanding 3-phase motor control. The multi-lingual option makes it easy to program the drives. These drives are very secure and protective as they process any fault or error status in real-time and report the findings. This is a continuous cycle; throughout the sequence, the drive will keep searching for potential faulty conditions. They also comply with NEMA and European standards and can be used worldwide. With a digital programmable feature within the drives, they can be programmed to perform tasks precisely and accurately. This feature gives a much higher control and flexibility to issue control through the Human Interface Module or serial communications port. A configurable I/O allows simple connections to be programmed and used in control applications as required.

1336 PLUS II Adjustable Frequency AC Drive Selection Guide

Adjustable frequency AC drives are widespread in many industries, including manufacturing, material handling, and process control. These drives use electronic controls to alter the frequency of the electrical power supplied to the motor, which in turn changes the speed of the motor. This allows for precise control over the motor's speed and efficient operation of the equipment it powers. Adjustable Frequency AC drives offer many benefits over traditional mechanical methods of speed control, including improved energy efficiency, better speed regulation, and increased reliability.

To ensure the optimal control of a motor, Allen Bradley 1336 Plus II Series Drives offer a diverse and finely tuned line of AC drives with Sensorless Vector Control/Volts per Hertz control. These products were created to provide speed control solutions for many applications and include the tuning capabilities necessary for unique needs. However, do not worry - this detailed guide has got covered!

This will address all aspects of these great devices in detail so one can pick the right one to suit the specific needs.

Overview of 1336 PLUS II Drives

The 1336 PLUS II drive series by Allen-Bradley is an accessible and efficient line of AC drives. With a suite of available adjustments, sensors, interfaces, and customization options that are universal throughout the product line - these models ensure easy integration, installation, operation, training, and upkeep for all environments or situations.

The 1336 PLUS II motors range includes voltages spanning from 200VAC to 240VAC, 380VAC to 480VAC, and 500VAC to 600 VAC. 9 different frame sizes (A1, A2, A3, A4, B1, B2, C, D, and E) permit this product to be used in stationary or mobile applications. This series of PLUS II motors has been programmed with an adjustable PWM frequency with an adjustable voltage output for adjustments depending on load requirements, therefore providing the industry with the desired performance necessary at all times.

To make things easier, this guide will divide the 1336 Plus II into three classes based on voltage, i.e., 220-240V, 380-480V, and 500-600V. It is important to note that all products under any class are equipped with a particular "enclosure type". (This is different from the frame sizes discussed above. Frame sizes give the dimensions of the enclosure, while enclosure type provides the type/quality/presence of the enclosure.)

These drives come with the following enclosures. Depending on the two-digit alphabetic code at position 4 of the product catalog number, you can know about the drive’s enclosure.

  • Code: AA
    • Type: IP 20 (NEMA 1)
    • Description: An enclosure with a type IP20 (NEMA 1) rating is designed for indoor use. It protects against accidental contact with live parts inside the enclosure, but it is not sealed against the ingress of solid objects, dust, or water.
  • Code: AE
    • Type: IP 20 (NEMA 1) / EMC
    • Description: An enclosure with a type IP20 (NEMA 1)/EMC rating is an indoor electrical enclosure that provides a degree of protection against accidental contact with live parts inside the enclosure, and it has been designed to minimize the emission of EMI and to provide some level of immunity to EMI from external sources.
  • Code: AF
    • Type: IP 65 (NEMA 4)
    • Description: An enclosure with a type IP65 (NEMA 4) rating is designed for outdoor use and provides a high level of protection against dust and water ingress. It is suitable for use in environments where the enclosure may be exposed to low-pressure water jets from all directions.
  • Code: AJ
    • Type: IP 54 (NEMA 12)
    • Description: An enclosure with a type IP54 (NEMA 12) rating is designed for indoor and industrial use and provides a moderate level of protection against dust and water ingress.
  • Code: AN
    • Type: IP 00 (Open)
    • Description: An enclosure with an IP00 rating is considered an "open" enclosure, as it does not protect against the ingress of any external objects or substances.

It is also significant to know that every adjustable frequency AC drive from Allen Bradley comes with a specific language module. The language module of any drive can be determined from a 2-digit code at position 5 of the product catalog number.

  • Language Code: EN
    • Language: English
    • Applicability: All drives
  • Language Code: FR
    • Language: French
    • Applicability: All drives
  • Language Code: DE
    • Language: German
    • Applicability: All drives
  • Language Code: IT
    • Language: Italian
    • Applicability: All drives
  • Language Code: JP
    • Language: Japanese
    • Applicability: All drives
  • Language Code: ES
    • Language: Spanish
    • Applicability: All drives

These drives are categorized into the following categories based on their voltages. The voltage class of each drive is classified at position 2 as a 2-digit alphabetic code of the product catalog number.

220V-240V AC & 310V DC Drives (code: AQ, A, Q)

These drives are available in a wide range of ampere ratings, from 2.3A to 325A, and KW ratings, from 0.37KW to 93KW, to suit the needs of different motor sizes and applications.

This 1336 Plus II series is compatible with all enclosure types, making it suitable for various environments and applications. The "AQ" models of the 1336 Plus II series offer support for both 310V DC and 220-240V AC, while the "A" models are only designed for use with 220-240V AC, and “Q” models are just compatible with 310V DC. These drives are user-friendly and feature built-in protection against electrical noise to ensure smooth and reliable operation. To have a more comprehensible view, the product range is as follows:

  • AQF05-AN/AA/AF/AJ – AQF75-AN/AA/AF/AJ
    • Voltage Class: 220V-240V AC or 310V DC
    • Ampere Rating Range: 2.3A - 22A
    • Kilowatt Rating Range: 0.37kW - 5.5kW
    • Horsepower Rating Range: 0.5Hp - 7.5Hp
  • A007-AN/AA/AF/AJ – A125-AN/AA/AF/AJ
    • Voltage Class: 220V-240V AC
    • Ampere Rating Range: 22A - 325A
    • Kilowatt Rating Range: 5.5kW - 93kW
    • Horsepower Rating Range: 7.5Hp - 125 Hp

380V-480V AC & 513V-620V DC Drives

This voltage class of 1336 Plus II drives is suitable for use with input voltages between 380V and 480V AC or 513V to 620V DC. The drives in this voltage class are available in both constant and variable torque models, with ampere ratings ranging from 1.1A to 670A and KW ratings ranging from 0.37KW to 448KW.

These drives are compatible with all enclosure types and suitable for use in various environments and applications. The "BR" models of the 1336 Plus II series offer support for 513V-620V DC, while the "B" models are designed for use with 380-480V AC. The "BP/BPR" models are specially enclosed in "F" frames, and the "BX" models have a special rating.

The voltage class of 380V-480V is used in various industrial and commercial applications, including manufacturing, material handling, and pump and fan control. These drives also control the speed and torque of various AC motor types, including induction motors, synchronous motors, and servo motors.

The product range of this class can be described as follows:

  • BRF05-AN/AA/AE/AF/AJ – BRF200-AN/AA/AE/AF/AJ
    • Voltage Class: 380V-480V AC or 513-620V DC
    • Ampere Rating Range: 1.1A or 1.2A (constant/variable torque) – 27A
    • Kilowatt Rating Range: 0.37kW – 15kW
    • Horsepower Rating Range: 0.5Hp – 20Hp
  • B015-AN/AA/AE/AF/AJ – B600-AN/AA/AE/AF/AJ
    • Voltage Class: 380V-480V AC
    • Ampere Rating Range: 24.2A or 27A (constant/variable torque) – 670A
    • Kilowatt Rating Range: 11kW or 15kW (constant/variable torque) – 448kW
    • Horsepower Rating Range: 15Hp or 20 Hp (constant/variable torque) – 600Hp
  • BP250-AN/AA/AE – BPR450-AN/AA/AE
    • Voltage Class: 380V-480V AC
    • Ampere Rating Range: 325A or 360A (constant/variable torque) – 532A
    • Kilowatt Rating Range: 187kW or 336kW  (constant/variable torque) – 448kW
    • Horsepower Rating Range: 250Hp or 300 Hp (constant/variable torque) – 450Hp

500V-600V AC & 775V DC Drives

The 500-600V Allen Bradley 1336 Plus II AC drives are dependable and high-performing drive series for accelerating electric motors in different commercial applications. This voltage rating of the 1336 Plus II makes it possible for this product to be used with input voltages between 500V and 600V AC, which suits a wide range of application needs. With amperage ratings starting at 2.0A up to 600A, these products can work well with just about any size motor while still being practical enough to withstand all load conditions - even when operated on frequencies as low as 30Hz!

These drives are compatible with all enclosure types and suitable for use in various environments and applications. The "CW" models of the 1336 Plus II series offer support for 775V DC, while the "C" models are designed for use with 500-600V AC. The "CP/CPR" models are specially enclosed in "F" frames. The detailed product range of this voltage class is given below:

  • CWF10-AN/AF/AA/AJ – CWF200-AN/AF/AA/AJ
    • Voltage Class: 500-600V AC or 775V DC
    • Ampere Rating Range: 2.0A – 24A
    • Kilowatt Rating Range: 0.75kW – 15kW
    • Horsepower Rating Range: 1Hp – 20Hp
  • C025-AN/AF/AA/AJ – C600AAN/AF/AA/AJ
    • Voltage Class: 500-600V AC
    • Ampere Rating Range: 30A – 600A
    • Kilowatt Rating Range: 18.5kW – 448kW
    • Horsepower Rating Range: 25Hp – 600Hp
  • CP350/CPR350-AN/AA – CP450/CPR400-AN/AA
    • Voltage Class: 500-600V AC
    • Ampere Rating Range: 350A – 400A
    • Kilowatt Rating Range: 261kW – 298kW
    • Horsepower Rating Range: 350Hp – 400Hp

Features of 1336 PLUS II Drives

llen Bradley 1336 Plus II drives are highly versatile and reliable adjustable frequency drives that offer a wide voltage range and multiple control modes, making them suitable for various industrial applications. They also have a user-friendly interface and built-in setup wizard that makes it easy to configure for specific needs. In addition, the 1336 Plus II drives have robust design features that make them suitable for use in harsh industrial environments, including a NEMA Type 1 enclosure and surge and EMI filters. Its built-in communication capabilities allow for remote monitoring and control, making it an ideal choice for a wide range of corporate applications.

Some highlighter features are given:

Communication Options:

There are several communication options available for the 1336 Plus drive, which can be used to monitor and control the drive remotely. These options include:

  • Single Point Remote I/O B Frame: This communication option allows the driver to communicate with other devices using a single point remote I/O link. It can exchange data with other devices, such as PLCs, HMIs, and PCs.
  • RS-232/422/485: This serial communication protocol allows the drive to communicate with other devices using a standard serial interface. It can exchange data with other devices, such as PLCs, HMIs, and PCs.
  • DF1 & DH485 B Frame: These communication protocols connect devices in an industrial control system. They allow devices to communicate with each other using a common data link and protocol.
  • DeviceNet: This field bus system is used to connect devices in an industrial control system. It allows devices to communicate with each other using a common data link and protocol.
  • Enhanced DeviceNet: This is an enhanced version of the DeviceNet field bus system that provides additional features and capabilities. It allows devices to communicate with each other using a common data link and protocol.

In general, these communication options are used to monitor and control the drive remotely and to exchange data with other devices in the control system. They can be used to set parameters, monitor drive performance, and troubleshoot issues.

Communication Options - B Frame & Up (Adapter 6)
  • Option Code: GM1
    • Description: Single Point Remote I/O B Frame
  • Option Code: GM2
    • Description: RS-232/422/485, DF1 & DH485 B Frame
  • Option Code: GM5
    • Description: DeviceNet
  • Option Code: GM6
    • Description: Enhanced DeviceNet
Communication Options - All Frames (Adapter 1)
  • Option Code: GMS1
    • Description: GM1 with Snap-In Cradle
  • Option Code: GMS2
    • Description: GM2 with Snap-In Cradle
  • Option Code: GMS5
    • Description: GM5 with Snap-In Cradle
  • Option Code: GMS6
    • Description: GM6 with Snap-In Cradle

Control Interface Options:

The 1336 Plus II drive offers several control interface options that can be used to connect the drive to external control devices, such as PLCs, HMIs, and sensors. These options include:

  • TTL Contact: This control interface option allows the drive to be controlled using a digital input signal. The drive can be connected to a device, such as a PLC or HMI, using a digital input signal, which can be used to start, stop, or control the speed of the drive.
  • TTL Contact & Encoder Feedback: This is a control interface option that allows the drive to be controlled using a digital input signal and receive feedback from an encoder. The encoder can be used to provide feedback on the speed and position of the motor, which can be used to control the drive or monitor its performance.
  • 24V/115V AC/DC & Encoder Feedback: This control interface option allows the device to be controlled using a 24V or 115V AC/DC input signal and receives feedback from an encoder. The encoder can provide feedback on the speed and position of the motor, which can be used to control the device or monitor its performance. Some control interfaces work fine without encoder feedback too.

These control interface options are generally used to connect the drive to external control devices and exchange data with these devices. They can be used to set parameters, monitor drive performance, and troubleshoot issues.

Control Interface Options - All Drives
  • Option Code: L4
    • Descriptions: TTL Contact
  • Option Code: L4E
    • Descriptions: TTL Contact & Encoder Feedback
  • Option Code: L7E
    • Descriptions: TTL Contact & Encoder Feedback for use with Encoder Loss Detection
  • Option Code: L5 2
    • Descriptions: 24V AC/DC
  • Option Code: L5E 2
    • Descriptions: 24V AC/DC & Encoder Feedback
  • Option Code: L8E
    • Descriptions: 24V AC/DC & Encoder Feedback for use with Encoder Loss Detection
  • Option Code: L6
    • Descriptions: 115V AC
  • Option Code: L6E
    • Descriptions: 115V AC & Encoder Feedback
  • Option Code: L9E
    • Descriptions: 115V AC & Encoder Feedback for use with Encoder Loss Detection

Protective Features:

To protect the drive and the motor it controls, the 1336 Plus II drives include several protective features. These features include:

  • Undervoltage: This protective feature monitors the voltage supplied to the drive and shuts it down if it falls below a certain level. This can help to prevent damage to the drive or the motor if the voltage supply is unstable.
  • Overvoltage: This protective feature monitors the voltage supplied to the drive and shuts it down if it exceeds a certain level. This can help to prevent damage to the drive or the motor if the voltage supply is too high.
  • Drive Overcurrent: This protective feature monitors the current flowing through the drive and shuts it down if it exceeds a certain level. This can help to prevent damage to the drive or the motor if the current flow is too high.
  • Overtemperature: This protective feature monitors the drive's temperature and shuts it down if it exceeds a certain level. This can help to prevent damage to the drive or the motor if the temperature becomes too high.
  • External Signal: This protective feature allows the drive to be shut down using an external signal, such as a command from a PLC or HMI. This can be used to shut down the drive during emergencies or maintenance.
  • Drive Output Short: This protective feature monitors the drive's output and shuts it down if a short circuit is detected. This can help to prevent damage to the drive or the motor if the output is shorted.
  • Ground Fault: This protective feature monitors the ground connection of the drive and shuts it down if a fault is detected. This can help to prevent damage to the drive or the motor if the ground connection is faulty.
  • Encoder Loss: This protective feature monitors the encoder input of the drive and shuts it down if the encoder signal is lost. This can help to prevent damage to the drive or the motor if the encoder fails or is disconnected.
  • Overcurrent Stall: This protective feature shuts down the drive if the current flowing through the motor exceeds a certain level for an extended period. This can help to prevent damage to the drive or the motor if the current flow is too high.
  • Overvoltage Stall: This protective feature shuts down the drive if the voltage supplied to the motor exceeds a certain level for an extended period. This can help to prevent damage to the drive or the motor if the voltage supply is too high.
  • Six Drive Alarms: The 1336 Plus II drive includes six drive alarms that can alert the operator of issues with the drive or the motor. These alarms can be programmed to trigger based on specific conditions, such as a high temperature or an overcurrent condition.
  • Fault Reset Input: This protective feature allows the operator to reset the drive after a fault has been detected. This can be done using an external signal, such as a command from a PLC or HMI.

In general, these protective features are designed to help prevent damage to the drive and the motor it controls and to alert the operator if there is an issue with the drive or the motor. They can be used to ensure the drive's reliability and safety in various industrial applications.

Special Functions:

1336 Plus II Drives include several special functions that can be used to enhance its performance and capabilities. These particular functions include:

  • Auto Economizer: This function allows the drive to operate in an energy-efficient mode, where it adjusts the speed of the motor to match the load demand. This can reduce energy consumption and improve the efficiency of the drive.
  • Process PI Controller: This function allows the drive to control the speed of the motor using a proportional-integral (PI) controller. The PI controller adjusts the speed of the motor based on the difference between the setpoint and the motor's actual speed.
  • Traverse Function: This particular function allows the drive to control the speed of the motor in a precise, step-by-step manner. It can be used to control the speed of the motor in applications where precise control is required, such as in positioning or handling systems.
  • Selectable Fault Reset & Run: This allows the operator to select whether the drive will reset or run after a fault has been detected. This can be useful in applications where it is crucial to keep the drive running, even if a fault has been detected.
  • Auto Restart on Power Up: This function allows the drive to restart automatically after a power failure or interruption. This can be useful in applications where it is crucial to keep the drive running, even if there is a power interruption.
  • Speed Sensitive Electronic Overload: This function allows the drive to monitor the current flowing through the motor and adjust the speed of the motor to prevent an overload condition. This can help to protect the drive and the motor from damage due to high current levels.
  • Auto-tuning: This function allows the drive to automatically adjust its control parameters to optimize the performance of the motor. It can be used to improve the drive's accuracy and stability and reduce the time required to set up the drive.
  • Step Logic: This special function allows the drive to be programmed to perform specific actions based on a set of conditions or events. It can be used to control the speed of the motor in a precise, step-by-step manner and to perform specific tasks based on specific conditions.

In general, these special functions can be used to enhance the performance and capabilities of the 1336 Plus drive and tailor it to the application's specific needs. They can be used to improve the drive's accuracy, stability, and efficiency and add additional functionality and control to the drive.

Conclusion

In conclusion, the Allen-Bradley 1336 Plus II drives are a reliable and versatile choice for controlling the speed and torque of three-phase AC motors. When selecting a 1336 Plus II drive, it is essential to consider the application's specific needs, as well as the available communication options, control interface options, and special functions. By considering these factors, it is possible to select a 1336 Plus II drive that is well-suited for the application, and that can provide the performance and functionality required.

Browse our selection of 1336 PLUS II Drives units

AutomationStop.com's online catalog offers one of the largest selections of preowned 1336 PLUS II Drives units in the world.

1336F-BRF50-AA-EN-HAS2

The 1336F-BRF50-AA-EN-HAS2 is one of many drives in the 1336 Plus II category that are expertly developed to satisfy diverse speed control requirements. These drives offer users a significant advantage in terms of their control requirements because they are constructed with identical control interface functionalities, commonality of design, & simple device connection. They include an (IGBT) Insulated Gate Bipolar Transistor, which enables a silent motor operation, and a 4-status indicator (LED).

1336F-BRF50-AA-EN-HAS2-L4

The Allen Bradley 1336F-BRF50-AA-EN-HAS2-L4 model has a five Horsepower power rating and runs on an input voltage range of 380 - 480 Volts Alternate Current and 513 - 620 Volts Direct Current. The 380 to 480 Volt motors have constant torque input of 6.6 - 8.0 kilo-volts - amperes/10 Amperes and an output of 6.7 kilo-volts - amperes /8.4 amperes, while the 480 Volt drives have torque (variable) input of 8.5 kilo-volts-amperes/10.7 Amperes and an output of 7.2 kilo-volts-amperes/9 amperes.

1336F-BRF50-AA-EN-HAS2-L5

This Allen Bradley module, Catalog ID 1336F-BRF50-AA-EN-HAS2-L5, is powered up by a three-phase AC/DC source and generates a power of 5 horsepower or 3.7 kilowatts. The drive has a 24 AC/DC control interface. The human interface module is identified as a programmer or a digital pot controller with IP20 rating standards. The drive may be set up, and various settings can be changed to meet the needs of the attached gear, thanks to a convenient onboard configuration unit. These onboard configuration units come with a keypad and an LCD display.

1336F-BRF50-AA-EN-HAS2-L6

This Allen Bradley drive, Catalog ID 1336F-BRF50-AA-EN-HAS2-L6, makes it simple to connect operating process parameters. When the drive has rotating loads, the drive allows programming for the deceleration and acceleration times and the option to fly start to establish a connection quickly and smoothly. Despite the unit lacking a speed feedback mechanism, the flying start is carried out as efficiently as possible. A 115 Volts Alternate Current control interface option is available on the 1336F-BRF50-AA-EN-HAS2-L6 and is appropriate for receiving control signals from an industrial automation environment.

1336F-BRF50-AA-EN-HAS2-LA2-L6

The Allen Bradley motor, Product ID 1336F-BRF50-AA-EN-HAS2-LA2-L6, is well guarded against potential harm from electric hazards. In cases of short-circuit, it is capable of withstanding 200,000 Amperes. Additionally, it provides excellent overvoltage and line-transient fault protection. The Allen Bradley 1336F-BRF50-AA-EN-HAS2-LA2-L6 has an electronically programmable output frequency of 0 to 400 Hertz and a three-phase output that may be modified from 0 to 480 Volts Alternate Current. Even without a feedback mechanism, the gadget can track the setpoint velocity with an accuracy of 0.1%.

1336F-BRF50-AA-EN-HAS2-LA5-L5

The 1336F-BRF50-AA-EN-HAS2-LA5-L5 drive's three-phase input voltage ranges from 380 to 480 Volts of Alternate Current, and its nominal Horsepower rating is 50 Horse Power and 37 kilowatts. In addition, the frequency tolerance ranges from 47 to 63 Hertz, and the allowed voltage ranges for the output and input are -10% of the voltage level and +10% of the peak power. Users can put the drive in an industrial area, such as a factory floor, because it employs a NEMA Category 1, IP20 enclosure.

1336F-BRF50-AA-EN-HCS2-L6

The 1336 PLUS II drive, Catalog ID 1336F-BRF50-AA-EN-HCS2-L6, has various motor control methods, like sensorless vector control with full tuning, that provide precise torque and speed regulation across a wide speed range, particularly low/zero speed applications that only need 15 revolutions per minute (RPM). The 1336F-BRF50-AA-EN-HCS2-L6 drive, like all Allen Bradley 1336 PLUS II drives, features a simple production process that monitors its feedback devices and modifies the drive's output based on the feedback requirements.

1336F-BRF50-AA-EN-HCS2-L8E

The 1336F-BRF50-AA-EN-HCS2-L8E drive has an integrated HMI comprising a controller/programmer, a digital potentiometer, and upload and download capabilities. The HMI is only capable of supporting English. The 1336F-BRF50-AA-EN-control HCS2-L8E's I/O supports 24 Volts Direct Current and 24 Volts Alternate Current voltage. Additionally, an encoder is offered for feedback and applications requiring encoder loss detection. The 1336F-BRF50-AA-EN-HCS2-L8E is an A3 frame and weighs 14.8 pounds. The drive's IP20-rated enclosure measures 290 millimeters x 215.9 millimeters x 105.4 millimeters.

1336F-BRF50-AA-EN-HCS2-LA2-LA3-L4

The 1336F-BRF50-AA-EN-HCS2-LA2-LA3-L4 drive's constant torque is specified with an Alternate Current-voltage range of 380 to 480 Volts. Constant torque input current ranges from 6.6 to 8.0 kilo-VA & 10.0 Amperes. Constant Torque produces an output current of 6.7 kilo-VA & 8.4 Amperes. This Alternate Current drive's variable torque is offered in two voltage levels, 480 and 400 volts. The 1336F-BRF50-AA-EN-HCS2-LA2-LA3-L4 Alternate Current drive's input voltage range is 513 to 620 Volts Direct Current or 380 to 480 Volts Alternate Current.

1336F-BRF50-AA-EN-HCS2-LA6-L6

The Allen-Bradley 1336 PLUS II 1336F-BRF50-AA-EN-HCS2-LA6-L6 drive has an AC input range between 380 and 480 Volts AC and a DC input range between 513 and 620 Volts DC. It comes with an analog interface that has an isolated bi-polar input and an isolated thermistor input. The 1336F-BRF50-AA-EN-HCS2-LA6-L6 drive can be completely programmed and easily controlled through its HMI, and application data can be downloaded and uploaded to the drive through the HMI too.

1336F-BRF50-AA-EN-L4

The Allen-Bradley 1336F-BRF50-AA-EN-L4 1336 PLUS II drive is able to control a motor with its output frequency or with one of its control technology options. This drive's control technology options include V/Hz or Volts per Hertz technology and sensorless vector technology. The 1336F-BRF50-AA-EN-L4 drive's output frequency range is between 0 and 400 Hz. Additionally, its AC voltage rating is between 380 and 480 Volts AC and its DC voltage rating is between 513 and 620 Volts DC.

1336F-BRF50-AA-EN-L5

The AC and DC-powered 1336F-BRF50-AA-EN-L5 drive is an Allen-Bradley 1336 PLUS II VFD (variable frequency drive). It can be powered by 380-480V AC or by 513-620V DC. The 1336F-BRF50-AA-EN-L5 drive also has an AC and DC-powered control interface that operates at 24 Volts with both types of voltage. The nominal Horsepower rating of the 1336F-BRF50-AA-EN-L5 drive is 5 Horsepower or 3.7 kilowatts. The 1336F-BRF50-AA-EN-L5 drive comes in an IP20 enclosure.

1336F-BRF50-AA-EN-L6

The 1336F-BRF50-AA-EN-L6 from Allen-Bradley is a 1336 PLUS II type of variable frequency drive often used for regulating AC motors in industrial applications and its working temperature range is 0-40 degrees Celsius. The 1336F-BRF50-AA-EN-L6 drive has a standard NEMA type 1 IP20 enclosure, an AC operating voltage range of 380-480V AC, a DC operating voltage range of 513-620V DC, and a nominal output rating of 3.7 kilowatts or 5 Horsepower.

1336F-BRF50-AA-EN-L9E

The Allen-Bradley 1336 PLUS II 1336F-BRF50-AA-EN-L9E variable frequency drive operates with voltage ratings of 380 to 480 Volts AC or 513 to 620 Volts DC depending on the application. It produces 3.7 kW of output power. The control interface on the 1336F-BRF50-AA-EN-L9E drive has an encoder feedback option and it can also detect encoder losses. The 1336F-BRF50-AA-EN-L9E drive also comes in an IP 20 type of NEMA 1 enclosure.

1336F-BRF50-AE-EN

With AC (380-480V) and DC (512-620V) input supply options, this Allen Bradley module, Catalog ID 1336F-BRF50-AE-EN, can generate an output of 5 HP or 3.7 kW. This drive from the Bulletin 1336F PLUS II series has the standard IP20 (NEMA1)/EMC rating. The 1336F-BRF50-AE-EN is designed to withstand brief disruptions in the power supply or power loss. Additionally, customers can digitally program and modify the 1336F-BRF50-AE-EN to precisely meet their demands. The drive's components are widely available, making it simple to repair and reassemble in the event of damage or malfunction.

1336F-BRF50-AE-EN-GMS1-L5

The Allen-Bradley 1336F-BRF50-AE-EN-GMS1-L5 drive is part of the 1336 Plus II series of Allen-Bradley variable frequency drives. It uses frequency-based technology to control an induction motor. This drive specifically controls the motor's operating speed and torque and it accepts input voltage ranges of 380 to 480V AC or of 513 to 620V DC. It provides an output power rating of 5 Horsepower, and it comes with a 24V AC/DC-rated control interface and a snap-in type of Remote I/O communication module.

1336F-BRF50-AE-EN-HAS2-L6

This Allen Bradley module, Model ID 1336F-BRF50-AE-EN-HAS2-L6, is a 5 HP three-phase 380-480 Volts AC or 513-620 Volts DC adjustable frequency drive. It is accompanied by a programmable human interface module controller with a 115 Volts AC rating. Both controller and drive have an IP-20 rating. Two Form A (N.O.) and two Form C (N.O. - N.C) control output contacts that can be programmed to 17 distinct drive variables are provided to the drive by this module's I/O interface. The interface also has high-speed input, pulse train input, and flexible analog inputs and outputs.

1336F-BRF50-AE-FR

The Allen-Bradley 1336 PLUS II 1336F-BRF50-AE-FR drive operates with an input power range of 380 to 480 Volts AC or 513 to 620 Volts DC. It also operates with an output power rating of 3.7 kilowatts (5 Horsepower). The 1336F-BRF50-AE-FR drive is frequently used to control and regulate induction motors in an industrial setting. It features a NEMA 1 EMC type of enclosure with an IP20 ingress protection rating.

1336F-BRF50-AF-EN

The 1336F-BRF50-AF-EN from Allen-Bradley is a variable frequency drive that offers microprocessor-based speed control and torque control for 3-phase industrial motors in a wide range of applications. This device has a 5-Horsepower output power rating, an AC voltage range of 380 to 480V AC, and a DC voltage range of 513 to 620V DC. The 1336F-BRF50-AF-EN drive comes with an IP65-rated enclosure that can protect it from significant levels of dust, chemicals, water, and other liquids.

1336F-BRF50-AJ-EN-HJ2-L6

The Allen-Bradley 1336F-BRF50-AJ-EN-HJ2-L6 is an adjustable frequency motor control drive with 2 input voltage options. The AC input option is 380 to 480 Volts AC and the DC input option is 513 to 620 Volts DC. The drive also has a control interface that operates at 115 Volts AC. The 1336F-BRF50-AJ-EN-HJ2-L6 drive also has an IP 54-rated NEMA 12 enclosure and a human-machine interface module with programmer and controller features and a digital potentiometer.

1336F-BRF50-AN-EN

Designed by Allen Bradley, part number 1336F-BRF50-AN-EN is a variable frequency drive belonging to the 1336 PLUS II product series. The input voltage range of this device is 380 to 480 volts AC or 513 to 620 volts DC. The 1336F-BRF50-AN-EN also has an output power rating of 3.7 kilowatts of 5 horsepower.

1336F-BRF50-AN-EN906-L7E-MX1

Designed by Allen Bradley, part number 1336F-BRF50-AN-EN906-L7E-MX1 is an Adjustable Frequency AC Drive. It has a voltage rating of 380 to 480 volts AC or 513 to 620 volts DC. Additionally, the 1336F-BRF50-AN-EN906-L7E-MX1 has an output power rating of 5 horsepower or 3.7 kilowatts. This drive features a control interface with TTL contacts, as well as encoder feedback for use with Encoder Loss Detection.

1336F-BRF50-AN-EN-GMS1-L6

The Allen-Bradley-engineered 1336F-BRF50-AN-EN-GMS1-L6 AC drive uses its output frequency to modify the speed and torque of motors. This AC and DC drive has 2 input voltage ranges which it can use in different applications. These voltage ranges are 380 to 480V AC and 513 to 620V DC. The 1336F-BRF50-AN-EN-GMS1-L6 drive's normal duty output rating is 5 Horsepower. The drive has an open enclosure, a snap-in Remote I/O module, and a 115V AC control interface.

1336F-BRF50-AN-EN-HAS2-L6

The 1336F-BRF50-AN-EN-HAS2-L6 adjustable frequency drive is a compact AC drive produced by Allen-Bradley. It operates with a voltage range of 380 to 480V AC or 513 to 620V DC and with 5 Horsepower. This drive also has a detachable programmer and controller type of human-machine interface with a digital speed potentiometer, and it also has an AC-powered control interface.

1336F-BRF50-AN-EN-HASB

Designed by Allen Bradley, part number 1336F-BRF50-AN-EN-HASB is a variable frequency drive. It belongs to the 1336 PLUS II series of products. It requires an input voltage ranging from 380 to 480 volts AC or 513 to 620 volts DC to operate. The rated power output of the 1336F-BRF50-AN-EN-HASB is 5 horsepower. It has an IP00-rated open-style enclosure.

1336F-BRF50-AN-EN-HASP-L5E

Product number 1336F-BRF50-AN-EN-HASP-L5E is an Allen Bradley Adjustable Frequency AC Drive from the 1336 PLUS II line of products. It has a voltage rating of 380 - 480 VAC or 513 - 620 VDC. In addition, this drive has a rated power output of 5 Hp or 3.7 kW. The 1336F-BRF50-AN-EN-HASP-L5E includes a 24V AC/DC control interface with encoder feedback.

1336F-BRF50-AN-EN-HCS2-L6

The Allen-Bradley 1336F-BRF50-AN-EN-HCS2-L6 drive is a microprocessor-based AC and DC drive that can work in variable torque and constant torque applications. This drive accepts input voltages of 380 to 480 Volts AC or 513 to 620V DC, and it has several optional interfaces. One of these interfaces is a 115V AC control interface and the other is an HMI or human-machine interface with several features and functions. The 1336F-BRF50-AN-EN-HCS2-L6 drive is housed in an IP00 type of open enclosure.

1336F-BRF50-AN-EN-HCSP-L6

The Allen-Bradley-manufactured 1336F-BRF50-AN-EN-HCSP-L6 drive is an Allen-Bradley 1336 PLUS II AC and DC drive that controls motors in multiple industries. It has a control interface which operates at 115 Volts AC. The drive also features a human-machine interface with a data upload/download option and also a programming option. The 1336F-BRF50-AN-EN-HCSP-L6 drive operates on an AC voltage range of 380 to 480 Volts and on a DC voltage range of 513 to 620 Volts. Its output rating is 3.7 kilowatts or 5 Horsepower. The 1336F-BRF50-AN-EN-HCSP-L6 drive is CSA, UL, and CE certified.

1336F-BRF50-AN-EN-L4

The Allen-Bradley 1336F-BRF50-AN-EN-L4 drive is an adjustable frequency drive that functions as a control device for induction motors. It has a Horsepower output rating of 5 Hp and it operates on a voltage range of either 380 to 480 Volts AC or of 513 to 620 Volts DC. The 1336F-BRF50-AN-EN-L4 drive features a TTL contact control interface, an IP 00-rated open enclosure, and configurable I/O channels.

1336F-BRF50-AN-EN-L6

The Allen-Bradley 1336F-BRF50-AN-EN-L6 AC drive is a component from the Allen-Bradley 1336 PLUS II range of adjustable frequency motor controller drives. It can adjust a motor's operating speed and torque through its adjustable frequency. This drive is an AC/DC adjustable frequency drive which operates at 380-480V AC or 513-620V DC. Its output power rating is 5 Horsepower or 3.7 kilowatts. The 1336F-BRF50-AN-EN-L6 drive's only interface is a control interface.

1336F-BRF50-AX-EN-L6

1336F-BRF75-AA-EN

The Allen-Bradley 1336F-BRF75-AA-EN drive is an adjustable frequency AC drive belonging to the 1336 Plus II series that has operating voltages of 380 to 480 Volts AC or 513 to 620 Volts DC and an output power rating of 7.5 Horsepower. This drive is designed to control an induction motor by changing the level of frequency that it applies to this motor. It comes with a NEMA type 1 enclosure and it has an IP20 ingress protection rating.

1336F-BRF75-AA-EN-GMS1

The 1336F-BRF75-AA-EN-GMS1 drive is an Allen-Bradley motor control drive in the 1336 PLUS II series. This drive has a Remote I/O module with a snap-in cradle for a communication option. The 1336F-BRF75-AA-EN-GMS1 drive can operate at 513 to 620V DC or at 380 to 480V AC. Its nominal Horsepower rating is 7.5 Hp (5.5 kW). The 1336F-BRF75-AA-EN-GMS1 drive can be integrated with an SMC or SMP power device.

1336F-BRF75-AA-EN-GMS1-L4

The 1336F-BRF75-AA-EN-GMS1-L4 drive is an Allen-Bradley 1336 PLUS II drive equipped with sensorless vector control technology and 2 optional interfaces. The sensorless vector technology allows the drive to produce high levels of torque in advanced applications, and the 2 optional interfaces are a control interface and a communication interface. The 1336F-BRF75-AA-EN-GMS1-L4 drive's control interface is a TTL contact interface and its communication interface is a Remote I/O interface that has a snap-in cradle.

1336F-BRF75-AA-EN-GMS1-L6

The 1336F-BRF75-AA-EN-GMS1-L6 motor control drive is an Allen-Bradley 1336 PLUS II series motor control drive with AC and DC voltage. It has an AC voltage rating of 380 to 480 Volts AC and a DC voltage rating of 513 to 620 Volts DC. The 1336F-BRF75-AA-EN-GMS1-L6 drive features a control interface module and a snap-in Remote I/O communication module. Its nominal output power ratings are 5.5 kilowatts or 7.5 Horsepower.

1336F-BRF75-AA-EN-GMS5

The Allen-Bradley 1336F-BRF75-AA-EN-GMS5 motor control drive from the 1336 PLUS II line can be integrated with motor control drives from the 1336 FORCE line and from the 1336 IMPACT line. It is also compatible with all Allen-Bradley PLC and SLC equipment. The 1336F-BRF75-AA-EN-GMS5 drive comes with a DeviceNet communication module that has a snap-in installation cradle. The parameters of the drive are easy to program. The 1336F-BRF75-AA-EN-GMS5 drive can operate at 380-480V AC or at 513-620V DC.

1336F-BRF75-AA-EN-GMS6-L4E

The Allen-Bradley 1336F-BRF75-AA-EN-GMS6-L4E 1336 PLUS II drive can control different motors with different types of control technology. Its control technology options include V/Hz technology and sensorless vector technology. The 1336F-BRF75-AA-EN-GMS6-L4E drive's V/Hz technology is suitable for most standard motor control applications and its sensorless vector technology is suitable for several advanced motor control applications, especially applications that require high torque ratings. The 1336F-BRF75-AA-EN-GMS6-L4E drive also has a control interface with encoder feedback and a snap-in type of Enhanced DeviceNet communication module.

1336F-BRF75-AA-EN-GMS6-L5

The Allen-Bradley 1336 PLUS II 1336F-BRF75-AA-EN-GMS6-L5 drive is a motor-controlling drive that is compatible with every device from the Allen-Bradley SLC and PLC series. Its communication option is an Enhanced DeviceNet interface module with a snap-in cradle. The 1336F-BRF75-AA-EN-GMS6-L5 drive has several sensors for dynamic current control and it supports sensorless vector control technology for advanced torque-based motor control applications. The 1336F-BRF75-AA-EN-GMS6-L5 drive comes with a 24V AC/DC-rated control interface.

1336F-BRF75-AA-EN-HAS1-L6

The Allen-Bradley 1336F-BRF75-AA-EN-HAS1-L6 motor control drive is AC-powered and DC-powered and it is part of the 1336 PLUS II drive series. It can operate at 380-480V AC or at 513-620V DC. The 1336F-BRF75-AA-EN-HAS1-L6 drive's main programming option is its HMI, and its HMI also supports control features and an analog pot. There is also a control interface on the 1336F-BRF75-AA-EN-HAS1-L6 drive that is rated at 115V AC.

1336F-BRF75-AA-EN-HAS1-LA4-L6

The Allen-Bradley 1336F-BRF75-AA-EN-HAS1-LA4-L6 1336 PLUS II drive has AC and DC input voltage, a control interface, an analog interface, and a human-machine interface. The AC voltage rating of the 1336F-BRF75-AA-EN-HAS1-LA4-L6 drive is 380 to 480 Volts while the DC voltage rating is 513 to 620 Volts. The 1336F-BRF75-AA-EN-HAS1-LA4-L6 drive's control interface is rated at 115 Volts AC, its analog interface has an input and output that are both configurable and isolated, and its human-machine interface has an analog potentiometer.

1336F-BRF75-AA-EN-HAS2

The Allen-Bradley 1336F-BRF75-AA-EN-HAS2 adjustable frequency drive is a 1336 PLUS II series adjustable frequency drive which operates at 380-480V AC/513-620V DC. This adjustable frequency drive can be programmed and controlled through its HMI. The 1336F-BRF75-AA-EN-HAS2 drive also comes with IGBTs to support quiet motor operation. Its nominal output ratings are 7.5 Hp or 5.5 kW. The 1336F-BRF75-AA-EN-HAS2 drive comes with a preventative maintenance feature that operates in real time to keep the drive safe and fully functional.

1336F-BRF75-AA-EN-HAS2-L4

The 1336F-BRF75-AA-EN-HAS2-L4 drive is an Allen-Bradley 1336 PLUS II motor control drive with advanced torque capabilities. Its AC voltage range is between 380 and 480 Volts AC and its DC voltage range is between 513 and 620 Volts DC. The maximum nominal Horsepower output rating of the 1336F-BRF75-AA-EN-HAS2-L4 drive is 7.5 Horsepower. The drive's enclosure is an IP20 enclosure and its language module is an English module.

1336F-BRF75-AA-EN-HAS2-L4E

The Allen-Bradley 1336F-BRF75-AA-EN-HAS2-L4E drive is a motor control drive with adjustable frequency from the 1336 PLUS II drive series. Its TTL contact control interface supports encoder feedback and its human-machine interface supports a digital potentiometer. The 1336F-BRF75-AA-EN-HAS2-L4E drive's nominal output ratings are 7.5 Horsepower or 5.5 kilowatts and it can operate at 380-480V AC/513-620V DC. This drive was designed to operate with a minimal number of internal connectors and cables, which makes it more reliable and easier to install and service than many other types of motor control drives.

1336F-BRF75-AA-EN-HAS2-L5

The Allen-Bradley 1336F-BRF75-AA-EN-HAS2-L5 drive from the 1336 PLUS II product line is capable of operating with AC or DC voltage and it comes with a control interface that is also capable of operating with AC or DC voltage. The drive can operate with 380-480V AC or 513-620V DC voltage and its control interface can operate with 24V AC or 24V DC. The 1336F-BRF75-AA-EN-HAS2-L5 drive also has an HMI that the operators can use to program it.

1336F-BRF75-AA-EN-HAS2-L6

The Allen-Bradley 1336F-BRF75-AA-EN-HAS2-L6 drive is a 1336 PLUS II variable frequency drive which is easy to use and easy to integrate with other Allen-Bradley drives and with Allen-Bradley controllers and power products. Its AC voltage rating is 380 to 480V AC and its DC voltage rating is 513 to 620V DC. The 1336F-BRF75-AA-EN-HAS2-L6 drive supports 5.5 kW or 7.5 Hp of output when it operates. It has a control interface and an HMI.

1336F-BRF75-AA-EN-HAS2-L6E

The Allen-Bradley 1336F-BRF75-AA-EN-HAS2-L6E 1336 PLUS II drive comes with several interface modules and several motor control options. Its interface modules include a control interface that supports encoder feedback and a human-machine interface that supports a digital potentiometer. Additionally, the 1336F-BRF75-AA-EN-HAS2-L6E drive's motor control options include a selectable Volts/Hertz control option and a sensorless type of vector control option. The 1336F-BRF75-AA-EN-HAS2-L6E drive also supports proactive current limiting and a dynamic current control option.

1336F-BRF75-AA-EN-HASB-L6

The 1336F-BRF75-AA-EN-HASB-L6 AC drive, manufactured by Rockwell Automation under the brand name Allen-Bradley, is a highly efficient and versatile drive designed to meet the demands of industrial applications. This drive has a voltage rating of 380-480V AC or 513-620V DC, making it suitable for motors rated up to 5.5 kW (7.5 HP). The drive features a durable and rugged IP 20 (NEMA 1) rated enclosure, protecting against dust and debris and allowing for use in challenging industrial environments. The drive's user-friendly interface and comprehensive English language documentation simplify installation, programming, and troubleshooting. One of the key features of the 1336F-BRF75-AA-EN-HASB-L6 drive is its ability to control and regulate the speed of an electric motor, ensuring that it operates at the optimal speed to meet the demands of the process. This results in improved efficiency, reduced energy consumption, and lower costs. The drive also offers a range of protection features, such as electronic overload protection, to ensure that the motor is protected against damage caused by overloading or overheating. In conclusion, the 1336F-BRF75-AA-EN-HASB-L6 drive is an excellent choice for industrial applications requiring precise control over the speed of an electric motor. With its rugged design, user-friendly interface, and comprehensive documentation, this drive offers the flexibility and reliability you need to ensure the success of your industrial processes.

1336F-BRF75-AA-EN-HASP-L4

The 1336F-BRF75-AA-EN-HASP-L4 is an AC motor drive from Allen Bradley that can be used with motor up to 5.5 HP nominal rating. It comes equipped with standard power disconnect features and can add components such as input fuses, circuit breakers, output contactors, and rotary switches. Additionally, the drive features a control power transformer, Class 10 rated overload relay, NEMA Type 1 (rated) enclosure, and a human-machine interface with programming capabilities. In terms of operation, the drive works by controlling the frequency of the AC voltage supplied to the motor. This allows the speed of the motor to be adjusted, providing improved control and energy efficiency. It uses the input signal from its human-machine interface (HMI) to determine the desired motor speed and adjusts the frequency accordingly. The drive also has electronic overload protection to protect the motor from damage.

1336F-BRF75-AA-EN-HASP-L5

The Allen-Bradley 1336F-BRF75-AA-EN-HASP-L5 is a high-performing variable frequency drive designed to meet the needs of industrial operations. It operates within a voltage range of 380-480V AC or 513-620V DC and has a horsepower capacity of 7.5. The drive is protected by an IP20 (NEMA 1) enclosure, making it ideal for use in factory environments. This drive comes with an easy-to-use interface that allows for real-time monitoring of the drive's performance and status. It also features a fault buffer that records the last four faults for easy diagnosis and resolution. The drive's digital programming capabilities make it easy to adjust settings and control the speed of operations. The 1336F-BRF75-AA-EN-HASP-L5 also offers selectable volts for a start and run boost and optional encoder feedback for precise speed regulation. The drive can perform logic steps based on digital inputs, encoder feedback, and time, either with or without a programmable controller. Overall, the 1336F-BRF75-AA-EN-HASP-L5 is a reliable and flexible drive designed to meet the needs of various industrial applications. Its robust construction and advanced programming capabilities make it an ideal choice for those looking to improve their operational efficiency and control.

1336F-BRF75-AA-EN-HASP-L6

The 1336F-BRF75-AA-EN-HASP-L6 drive is a versatile and high-performing drive from Allen-Bradley. It provides excellent control and accuracy thanks to its interface module, which has a keypad and a backlit LCD display. The display shows 16 characters simultaneously and 8 value characters per line. The 1336F-BRF75-AA-EN-HASP-L6 is designed to be user-friendly, with its parameters divided into groups for easy programming. The drive also has a fault buffer that records up to the last 4 faults, allowing for quick and efficient troubleshooting. Additionally, the drive operates on 380 to 480 Volts AC or 513 to 620 Volts DC voltage, providing a 7.5 horsepower output, making it suitable for various industrial applications.
Previous 1

...

23

24

25

...

27 Next

Displaying 50 of 1331 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP