GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Allen Bradley - Drives

1336 PLUS II Drives

The 1336 PLUS II by Allen Bradley provides adjustable frequency AC drives that provide ratings from 0.37-448 kW (0.5-600 HP) in three different voltage ranges of 200-240V AC, 380-480V AC, and 500-600V AC. Throughout this family of drives, simplicity in the designing and programming is consistent with an easy-to-read display, easy programming parameters, simple tuning, serial communication, common assembly parts, and compact packaging. Some special functions that can be found in the 1336 PLUS II drives are Auto Economizer, process PI controller, traverse function, selectable fault reset & run, auto restart on power up, speed sensitive electronic overload, auto-tuning, and step logic. The drive operations include Sensor-less vector control, selectable volts/hertz mode, and multi-lingual selection. The sensorless vector control system gives the drives a background of powerful algorithms, handling tough applications that other drives can’t. Both sensorless vector control and V/Hz mode provide outstanding 3-phase motor control. The multi-lingual option makes it easy to program the drives. These drives are very secure and protective as they process any fault or error status in real-time and report the findings. This is a continuous cycle; throughout the sequence, the drive will keep searching for potential faulty conditions. They also comply with NEMA and European standards and can be used worldwide. With a digital programmable feature within the drives, they can be programmed to perform tasks precisely and accurately. This feature gives a much higher control and flexibility to issue control through the Human Interface Module or serial communications port. A configurable I/O allows simple connections to be programmed and used in control applications as required.

1336 PLUS II Adjustable Frequency AC Drive Selection Guide

Adjustable frequency AC drives are widespread in many industries, including manufacturing, material handling, and process control. These drives use electronic controls to alter the frequency of the electrical power supplied to the motor, which in turn changes the speed of the motor. This allows for precise control over the motor's speed and efficient operation of the equipment it powers. Adjustable Frequency AC drives offer many benefits over traditional mechanical methods of speed control, including improved energy efficiency, better speed regulation, and increased reliability.

To ensure the optimal control of a motor, Allen Bradley 1336 Plus II Series Drives offer a diverse and finely tuned line of AC drives with Sensorless Vector Control/Volts per Hertz control. These products were created to provide speed control solutions for many applications and include the tuning capabilities necessary for unique needs. However, do not worry - this detailed guide has got covered!

This will address all aspects of these great devices in detail so one can pick the right one to suit the specific needs.

Overview of 1336 PLUS II Drives

The 1336 PLUS II drive series by Allen-Bradley is an accessible and efficient line of AC drives. With a suite of available adjustments, sensors, interfaces, and customization options that are universal throughout the product line - these models ensure easy integration, installation, operation, training, and upkeep for all environments or situations.

The 1336 PLUS II motors range includes voltages spanning from 200VAC to 240VAC, 380VAC to 480VAC, and 500VAC to 600 VAC. 9 different frame sizes (A1, A2, A3, A4, B1, B2, C, D, and E) permit this product to be used in stationary or mobile applications. This series of PLUS II motors has been programmed with an adjustable PWM frequency with an adjustable voltage output for adjustments depending on load requirements, therefore providing the industry with the desired performance necessary at all times.

To make things easier, this guide will divide the 1336 Plus II into three classes based on voltage, i.e., 220-240V, 380-480V, and 500-600V. It is important to note that all products under any class are equipped with a particular "enclosure type". (This is different from the frame sizes discussed above. Frame sizes give the dimensions of the enclosure, while enclosure type provides the type/quality/presence of the enclosure.)

These drives come with the following enclosures. Depending on the two-digit alphabetic code at position 4 of the product catalog number, you can know about the drive’s enclosure.

  • Code: AA
    • Type: IP 20 (NEMA 1)
    • Description: An enclosure with a type IP20 (NEMA 1) rating is designed for indoor use. It protects against accidental contact with live parts inside the enclosure, but it is not sealed against the ingress of solid objects, dust, or water.
  • Code: AE
    • Type: IP 20 (NEMA 1) / EMC
    • Description: An enclosure with a type IP20 (NEMA 1)/EMC rating is an indoor electrical enclosure that provides a degree of protection against accidental contact with live parts inside the enclosure, and it has been designed to minimize the emission of EMI and to provide some level of immunity to EMI from external sources.
  • Code: AF
    • Type: IP 65 (NEMA 4)
    • Description: An enclosure with a type IP65 (NEMA 4) rating is designed for outdoor use and provides a high level of protection against dust and water ingress. It is suitable for use in environments where the enclosure may be exposed to low-pressure water jets from all directions.
  • Code: AJ
    • Type: IP 54 (NEMA 12)
    • Description: An enclosure with a type IP54 (NEMA 12) rating is designed for indoor and industrial use and provides a moderate level of protection against dust and water ingress.
  • Code: AN
    • Type: IP 00 (Open)
    • Description: An enclosure with an IP00 rating is considered an "open" enclosure, as it does not protect against the ingress of any external objects or substances.

It is also significant to know that every adjustable frequency AC drive from Allen Bradley comes with a specific language module. The language module of any drive can be determined from a 2-digit code at position 5 of the product catalog number.

  • Language Code: EN
    • Language: English
    • Applicability: All drives
  • Language Code: FR
    • Language: French
    • Applicability: All drives
  • Language Code: DE
    • Language: German
    • Applicability: All drives
  • Language Code: IT
    • Language: Italian
    • Applicability: All drives
  • Language Code: JP
    • Language: Japanese
    • Applicability: All drives
  • Language Code: ES
    • Language: Spanish
    • Applicability: All drives

These drives are categorized into the following categories based on their voltages. The voltage class of each drive is classified at position 2 as a 2-digit alphabetic code of the product catalog number.

220V-240V AC & 310V DC Drives (code: AQ, A, Q)

These drives are available in a wide range of ampere ratings, from 2.3A to 325A, and KW ratings, from 0.37KW to 93KW, to suit the needs of different motor sizes and applications.

This 1336 Plus II series is compatible with all enclosure types, making it suitable for various environments and applications. The "AQ" models of the 1336 Plus II series offer support for both 310V DC and 220-240V AC, while the "A" models are only designed for use with 220-240V AC, and “Q” models are just compatible with 310V DC. These drives are user-friendly and feature built-in protection against electrical noise to ensure smooth and reliable operation. To have a more comprehensible view, the product range is as follows:

  • AQF05-AN/AA/AF/AJ – AQF75-AN/AA/AF/AJ
    • Voltage Class: 220V-240V AC or 310V DC
    • Ampere Rating Range: 2.3A - 22A
    • Kilowatt Rating Range: 0.37kW - 5.5kW
    • Horsepower Rating Range: 0.5Hp - 7.5Hp
  • A007-AN/AA/AF/AJ – A125-AN/AA/AF/AJ
    • Voltage Class: 220V-240V AC
    • Ampere Rating Range: 22A - 325A
    • Kilowatt Rating Range: 5.5kW - 93kW
    • Horsepower Rating Range: 7.5Hp - 125 Hp

380V-480V AC & 513V-620V DC Drives

This voltage class of 1336 Plus II drives is suitable for use with input voltages between 380V and 480V AC or 513V to 620V DC. The drives in this voltage class are available in both constant and variable torque models, with ampere ratings ranging from 1.1A to 670A and KW ratings ranging from 0.37KW to 448KW.

These drives are compatible with all enclosure types and suitable for use in various environments and applications. The "BR" models of the 1336 Plus II series offer support for 513V-620V DC, while the "B" models are designed for use with 380-480V AC. The "BP/BPR" models are specially enclosed in "F" frames, and the "BX" models have a special rating.

The voltage class of 380V-480V is used in various industrial and commercial applications, including manufacturing, material handling, and pump and fan control. These drives also control the speed and torque of various AC motor types, including induction motors, synchronous motors, and servo motors.

The product range of this class can be described as follows:

  • BRF05-AN/AA/AE/AF/AJ – BRF200-AN/AA/AE/AF/AJ
    • Voltage Class: 380V-480V AC or 513-620V DC
    • Ampere Rating Range: 1.1A or 1.2A (constant/variable torque) – 27A
    • Kilowatt Rating Range: 0.37kW – 15kW
    • Horsepower Rating Range: 0.5Hp – 20Hp
  • B015-AN/AA/AE/AF/AJ – B600-AN/AA/AE/AF/AJ
    • Voltage Class: 380V-480V AC
    • Ampere Rating Range: 24.2A or 27A (constant/variable torque) – 670A
    • Kilowatt Rating Range: 11kW or 15kW (constant/variable torque) – 448kW
    • Horsepower Rating Range: 15Hp or 20 Hp (constant/variable torque) – 600Hp
  • BP250-AN/AA/AE – BPR450-AN/AA/AE
    • Voltage Class: 380V-480V AC
    • Ampere Rating Range: 325A or 360A (constant/variable torque) – 532A
    • Kilowatt Rating Range: 187kW or 336kW  (constant/variable torque) – 448kW
    • Horsepower Rating Range: 250Hp or 300 Hp (constant/variable torque) – 450Hp

500V-600V AC & 775V DC Drives

The 500-600V Allen Bradley 1336 Plus II AC drives are dependable and high-performing drive series for accelerating electric motors in different commercial applications. This voltage rating of the 1336 Plus II makes it possible for this product to be used with input voltages between 500V and 600V AC, which suits a wide range of application needs. With amperage ratings starting at 2.0A up to 600A, these products can work well with just about any size motor while still being practical enough to withstand all load conditions - even when operated on frequencies as low as 30Hz!

These drives are compatible with all enclosure types and suitable for use in various environments and applications. The "CW" models of the 1336 Plus II series offer support for 775V DC, while the "C" models are designed for use with 500-600V AC. The "CP/CPR" models are specially enclosed in "F" frames. The detailed product range of this voltage class is given below:

  • CWF10-AN/AF/AA/AJ – CWF200-AN/AF/AA/AJ
    • Voltage Class: 500-600V AC or 775V DC
    • Ampere Rating Range: 2.0A – 24A
    • Kilowatt Rating Range: 0.75kW – 15kW
    • Horsepower Rating Range: 1Hp – 20Hp
  • C025-AN/AF/AA/AJ – C600AAN/AF/AA/AJ
    • Voltage Class: 500-600V AC
    • Ampere Rating Range: 30A – 600A
    • Kilowatt Rating Range: 18.5kW – 448kW
    • Horsepower Rating Range: 25Hp – 600Hp
  • CP350/CPR350-AN/AA – CP450/CPR400-AN/AA
    • Voltage Class: 500-600V AC
    • Ampere Rating Range: 350A – 400A
    • Kilowatt Rating Range: 261kW – 298kW
    • Horsepower Rating Range: 350Hp – 400Hp

Features of 1336 PLUS II Drives

llen Bradley 1336 Plus II drives are highly versatile and reliable adjustable frequency drives that offer a wide voltage range and multiple control modes, making them suitable for various industrial applications. They also have a user-friendly interface and built-in setup wizard that makes it easy to configure for specific needs. In addition, the 1336 Plus II drives have robust design features that make them suitable for use in harsh industrial environments, including a NEMA Type 1 enclosure and surge and EMI filters. Its built-in communication capabilities allow for remote monitoring and control, making it an ideal choice for a wide range of corporate applications.

Some highlighter features are given:

Communication Options:

There are several communication options available for the 1336 Plus drive, which can be used to monitor and control the drive remotely. These options include:

  • Single Point Remote I/O B Frame: This communication option allows the driver to communicate with other devices using a single point remote I/O link. It can exchange data with other devices, such as PLCs, HMIs, and PCs.
  • RS-232/422/485: This serial communication protocol allows the drive to communicate with other devices using a standard serial interface. It can exchange data with other devices, such as PLCs, HMIs, and PCs.
  • DF1 & DH485 B Frame: These communication protocols connect devices in an industrial control system. They allow devices to communicate with each other using a common data link and protocol.
  • DeviceNet: This field bus system is used to connect devices in an industrial control system. It allows devices to communicate with each other using a common data link and protocol.
  • Enhanced DeviceNet: This is an enhanced version of the DeviceNet field bus system that provides additional features and capabilities. It allows devices to communicate with each other using a common data link and protocol.

In general, these communication options are used to monitor and control the drive remotely and to exchange data with other devices in the control system. They can be used to set parameters, monitor drive performance, and troubleshoot issues.

Communication Options - B Frame & Up (Adapter 6)
  • Option Code: GM1
    • Description: Single Point Remote I/O B Frame
  • Option Code: GM2
    • Description: RS-232/422/485, DF1 & DH485 B Frame
  • Option Code: GM5
    • Description: DeviceNet
  • Option Code: GM6
    • Description: Enhanced DeviceNet
Communication Options - All Frames (Adapter 1)
  • Option Code: GMS1
    • Description: GM1 with Snap-In Cradle
  • Option Code: GMS2
    • Description: GM2 with Snap-In Cradle
  • Option Code: GMS5
    • Description: GM5 with Snap-In Cradle
  • Option Code: GMS6
    • Description: GM6 with Snap-In Cradle

Control Interface Options:

The 1336 Plus II drive offers several control interface options that can be used to connect the drive to external control devices, such as PLCs, HMIs, and sensors. These options include:

  • TTL Contact: This control interface option allows the drive to be controlled using a digital input signal. The drive can be connected to a device, such as a PLC or HMI, using a digital input signal, which can be used to start, stop, or control the speed of the drive.
  • TTL Contact & Encoder Feedback: This is a control interface option that allows the drive to be controlled using a digital input signal and receive feedback from an encoder. The encoder can be used to provide feedback on the speed and position of the motor, which can be used to control the drive or monitor its performance.
  • 24V/115V AC/DC & Encoder Feedback: This control interface option allows the device to be controlled using a 24V or 115V AC/DC input signal and receives feedback from an encoder. The encoder can provide feedback on the speed and position of the motor, which can be used to control the device or monitor its performance. Some control interfaces work fine without encoder feedback too.

These control interface options are generally used to connect the drive to external control devices and exchange data with these devices. They can be used to set parameters, monitor drive performance, and troubleshoot issues.

Control Interface Options - All Drives
  • Option Code: L4
    • Descriptions: TTL Contact
  • Option Code: L4E
    • Descriptions: TTL Contact & Encoder Feedback
  • Option Code: L7E
    • Descriptions: TTL Contact & Encoder Feedback for use with Encoder Loss Detection
  • Option Code: L5 2
    • Descriptions: 24V AC/DC
  • Option Code: L5E 2
    • Descriptions: 24V AC/DC & Encoder Feedback
  • Option Code: L8E
    • Descriptions: 24V AC/DC & Encoder Feedback for use with Encoder Loss Detection
  • Option Code: L6
    • Descriptions: 115V AC
  • Option Code: L6E
    • Descriptions: 115V AC & Encoder Feedback
  • Option Code: L9E
    • Descriptions: 115V AC & Encoder Feedback for use with Encoder Loss Detection

Protective Features:

To protect the drive and the motor it controls, the 1336 Plus II drives include several protective features. These features include:

  • Undervoltage: This protective feature monitors the voltage supplied to the drive and shuts it down if it falls below a certain level. This can help to prevent damage to the drive or the motor if the voltage supply is unstable.
  • Overvoltage: This protective feature monitors the voltage supplied to the drive and shuts it down if it exceeds a certain level. This can help to prevent damage to the drive or the motor if the voltage supply is too high.
  • Drive Overcurrent: This protective feature monitors the current flowing through the drive and shuts it down if it exceeds a certain level. This can help to prevent damage to the drive or the motor if the current flow is too high.
  • Overtemperature: This protective feature monitors the drive's temperature and shuts it down if it exceeds a certain level. This can help to prevent damage to the drive or the motor if the temperature becomes too high.
  • External Signal: This protective feature allows the drive to be shut down using an external signal, such as a command from a PLC or HMI. This can be used to shut down the drive during emergencies or maintenance.
  • Drive Output Short: This protective feature monitors the drive's output and shuts it down if a short circuit is detected. This can help to prevent damage to the drive or the motor if the output is shorted.
  • Ground Fault: This protective feature monitors the ground connection of the drive and shuts it down if a fault is detected. This can help to prevent damage to the drive or the motor if the ground connection is faulty.
  • Encoder Loss: This protective feature monitors the encoder input of the drive and shuts it down if the encoder signal is lost. This can help to prevent damage to the drive or the motor if the encoder fails or is disconnected.
  • Overcurrent Stall: This protective feature shuts down the drive if the current flowing through the motor exceeds a certain level for an extended period. This can help to prevent damage to the drive or the motor if the current flow is too high.
  • Overvoltage Stall: This protective feature shuts down the drive if the voltage supplied to the motor exceeds a certain level for an extended period. This can help to prevent damage to the drive or the motor if the voltage supply is too high.
  • Six Drive Alarms: The 1336 Plus II drive includes six drive alarms that can alert the operator of issues with the drive or the motor. These alarms can be programmed to trigger based on specific conditions, such as a high temperature or an overcurrent condition.
  • Fault Reset Input: This protective feature allows the operator to reset the drive after a fault has been detected. This can be done using an external signal, such as a command from a PLC or HMI.

In general, these protective features are designed to help prevent damage to the drive and the motor it controls and to alert the operator if there is an issue with the drive or the motor. They can be used to ensure the drive's reliability and safety in various industrial applications.

Special Functions:

1336 Plus II Drives include several special functions that can be used to enhance its performance and capabilities. These particular functions include:

  • Auto Economizer: This function allows the drive to operate in an energy-efficient mode, where it adjusts the speed of the motor to match the load demand. This can reduce energy consumption and improve the efficiency of the drive.
  • Process PI Controller: This function allows the drive to control the speed of the motor using a proportional-integral (PI) controller. The PI controller adjusts the speed of the motor based on the difference between the setpoint and the motor's actual speed.
  • Traverse Function: This particular function allows the drive to control the speed of the motor in a precise, step-by-step manner. It can be used to control the speed of the motor in applications where precise control is required, such as in positioning or handling systems.
  • Selectable Fault Reset & Run: This allows the operator to select whether the drive will reset or run after a fault has been detected. This can be useful in applications where it is crucial to keep the drive running, even if a fault has been detected.
  • Auto Restart on Power Up: This function allows the drive to restart automatically after a power failure or interruption. This can be useful in applications where it is crucial to keep the drive running, even if there is a power interruption.
  • Speed Sensitive Electronic Overload: This function allows the drive to monitor the current flowing through the motor and adjust the speed of the motor to prevent an overload condition. This can help to protect the drive and the motor from damage due to high current levels.
  • Auto-tuning: This function allows the drive to automatically adjust its control parameters to optimize the performance of the motor. It can be used to improve the drive's accuracy and stability and reduce the time required to set up the drive.
  • Step Logic: This special function allows the drive to be programmed to perform specific actions based on a set of conditions or events. It can be used to control the speed of the motor in a precise, step-by-step manner and to perform specific tasks based on specific conditions.

In general, these special functions can be used to enhance the performance and capabilities of the 1336 Plus drive and tailor it to the application's specific needs. They can be used to improve the drive's accuracy, stability, and efficiency and add additional functionality and control to the drive.

Conclusion

In conclusion, the Allen-Bradley 1336 Plus II drives are a reliable and versatile choice for controlling the speed and torque of three-phase AC motors. When selecting a 1336 Plus II drive, it is essential to consider the application's specific needs, as well as the available communication options, control interface options, and special functions. By considering these factors, it is possible to select a 1336 Plus II drive that is well-suited for the application, and that can provide the performance and functionality required.

Browse our selection of 1336 PLUS II Drives units

AutomationStop.com's online catalog offers one of the largest selections of preowned 1336 PLUS II Drives units in the world.

1336F-A020-AA-ES-HAS2-L6

The Allen-Bradley 1336F-A020-AA-ES-HAS2-L6 drive is a 1336 PLUS II motor controller that has 2 interface modules. One of these interface modules is a control module rated at 115V AC. The other interface module is an HMI or human-machine interface that has a digital potentiometer and that supports programming functions and control functions. The 1336F-A020-AA-ES-HAS2-L6 drive operates at 200-240V AC and produces 20 Horsepower (15 kilowatts) of nominal output.

1336F-AQF10-AA-EN935-HCS2-LA2-LA3-L6

The Allen-Bradley 1336F-AQF10-AA-EN935-HCS2-LA2-LA3-L6 1336 PLUS II drive comes with a variety of optional interfaces that expand its functionalities. Two of these optional interfaces are analog interfaces that add configurable inputs and outputs to the drive, another one of these interfaces is a control interface, and the final one is an advanced HMI which can upload and download data. The 1336F-AQF10-AA-EN935-HCS2-LA2-LA3-L6 drive also comes with a special function that causes its MOP frequency source to reset to zero automatically if the system stops.

1336F-B015-AA-EN935-HCS2-LA2-LA3-L6

The Allen-Bradley 1336F-B015-AA-EN935-HCS2-LA2-LA3-L6 1336 PLUS II drive has several interface options and with a special MOP reset feature. The interface options for the 1336F-B015-AA-EN935-HCS2-LA2-LA3-L6 drive include a control interface which is AC-powered, an analog interface with 2 inputs, another analog interface with 2 outputs, and a human-machine interface with programmer features, control features, upload/download features, and a digital potentiometer feature. The 1336F-B015-AA-EN935-HCS2-LA2-LA3-L6 drive's MOP reset feature allows the drive's MOP frequency source to reset to zero after a stop.

1336F-B015-AA-ES-HAS2

The Allen-Bradley 1336F-B015-AA-ES-HAS2 drive from the 1336 PLUS II series operates at 380-480V AC of input voltage and produces 15 Horsepower or 11 kilowatts of output power. There is a human-machine interface installed on the 1336F-B015-AA-ES-HAS2 drive and this human-machine interface is a programmer and controller type of interface with a digital type of potentiometer. The 1336F-B015-AA-ES-HAS2 drive can operate in English or Spanish. It has a Spanish language module.

1336F-B015-AA-ES-HAS2-LA2-LA3-L6

1336F-B015-AE-EN935-HASP-L6

The Allen-Bradley 1336F-B015-AE-EN935-HASP-L6 drive is a 1336 PLUS II series drive with an EMC type of NEMA enclosure. This enclosure helps to protect the 1336F-B015-AE-EN935-HASP-L6 drive from electromagnetic interference and it protects the drive from low levels of dust or dirt because it also has an IP20 ingress protection rating. The 1336F-B015-AE-EN935-HASP-L6 drive comes with a 115V AC-rated control interface and with an HMI that is a programmer-only model. Its voltage rating is 380-480V AC.

1336F-B015-AE-EN962-GM2-HCS2-L4E

The Allen-Bradley 1336F-B015-AE-EN962-GM2-HCS2-L4E 1336 PLUS II drive produces 15 Hp of nominal output at 380-480V AC of voltage. It has a communication module which can support DH485 communication, DF1 communication, and RS-232/422/485 communication. The 1336F-B015-AE-EN962-GM2-HCS2-L4E drive also has an HMI which can program the drive, control the drive, upload data to the drive, and download data to the drive. There is also a control interface on the 1336F-B015-AE-EN962-GM2-HCS2-L4E drive that supports encoder feedback.

1336F-B015-AE-ES-HAS2-L4

1336F-B020-AA-ES-GM1-HAS2-L6

Product number 1336F-B020-AA-ES-GM1-HAS2-L6 is a 1336 PLIS II-series adjustable frequency AC drive. It was designed and produced by Allen Bradley/Rockwell Automation. This drive operates via an input voltage ranging from 380 to 480 volts AC. In addition, this product outputs 15 kilowatts (20 horsepower) of power. The 1336F-B020-AA-ES-GM1-HAS2-L6 features a 115-volt AC control interface.

1336F-B020-AA-ES-HAS2-L6

The Allen-Bradley 1336 PLUS II 1336F-B020-AA-ES-HAS2-L6 drive operates at a voltage rating of 380 to 480 Volts AC and at a nominal output rating of 20 Horsepower (15 kilowatts). This drive has a snap-in programmer/controller type of HMI that includes a digital potentiometer. The HMI usually operates in English, but it can operate in Spanish as well because the 1336F-B020-AA-ES-HAS2-L6 drive has a Spanish language module. The 1336F-B020-AA-ES-HAS2-L6 drive also has an IP20 enclosure and an AC control interface module.

1336F-MCB-SP1D

The 1336F-MCB-SP1D control board was designed to be used in drives from the Allen-Bradley 1336 PLUS II series. It is a printed circuit board (PCB) that can operate as a 1336 PLUS II drive's main control board. To ensure that the 1336F-MCB-SP1D control board operates properly and to protect it from damage, the users of the host drive should install it in the correct space in the drive system and ensure that it is not exposed to extreme temperatures.

1336F-MCB-SP1M

This industrial module, Model ID 1336F-MCB-SP1M, is a Drive Control PC Board by Allen Bradley. This board is compatible with an Alternate Current drive with 230 Volts of power supply. Operational with drives that have a Frame B to G size. Some features are an automatic economizer, dynamic braking, slip compensation, step logic, configurable fault reset and run features, fault detection, trip, auto restarting, and auto-tuning. Additionally, these drives provide operational characteristics, including the sensorless vector control mode and a configurable Volts per Hertz control mode.

1336F-MCB-SP1E

This module, Catalog ID 1336F-MCB-SP1E, is a Bulletin-1336F PLUS II Main Control Board by Allen Bradley. This board has a +/-10 acceptable range according to the 115 Volts AC input supply. This board qualifies with the NEMA standards and the diagnostics provided are in real-time. Its configurable features include three skip frequencies, flying starts, last four event fault memory, and line loss restart mode. The robust construction and compact size of this 1336F-MCB-SP1E unit help save precious panel space. It offers real-time diagnostics and complies with NEMA and European requirements.

1336F-A015-AE-EN

The 1336F-A015-AE-EN drive from the Allen-Bradley 1336 PLUS II line has an EMC-rated enclosure, analog inputs, analog outputs, Volts/Hertz control technology, and sensorless vector control technology, but no interface modules. Its voltage rating is 200V AC to 240V AC, and its nominal output power ratings are 15 Hp or 11 kW. The 1336F-A015-AE-EN drive can start a motor with a flying start option and it can save up to 7 preset speeds that it can use when controlling the drive.

1336F-AQF10-AE-DE

The Allen-Bradley 1336F-AQF10-AE-DE drive is a 1336 PLUS II microprocessor-based drive that can operate with DC voltage as well as AC voltage. It can operate with 310V DC or it can operate with 200 to 240V AC. The 1336F-AQF10-AE-DE drive's IP20 enclosure is EMC-rated and its language module is a German module which allows it to be operated in German as well as in English. It has a nominal output power rating of 1 Horsepower.

1336F-AQF10-AE-EN

Product number 1336F-AQF10-AE-EN is an adjustable frequency AC drive from Allen-Bradley. It belongs to the 1336 PLUS II product line. This drive operates via an input voltage ranging from 200 to 240 volts AC or 310 volts DC. In addition, the 1336F-AQF10-AE-EN has a power output rating of 0.75 kilowatts (1 horsepower). For protection against external hazards, this AC drive is equipped with an IP 20-rated NEMA Type 1/EMC enclosure.

1336F-AQF10-AE-ES

The Allen-Bradley 1336F-AQF10-AE-ES 1336 PLUS II drive is a variable frequency drive that has an EMC-rated enclosure and that can operate on AC or on DC voltage. It can specifically operate on 200-240V AC or on 310V DC. The 1336F-AQF10-AE-ES drive has nominal output ratings of 1 Horsepower or 0.75 kilowatts. It also has several interface module slots, but it does not include any interface modules.

1336F-AQF10-AE-FR

The Allen-Bradley 1336F-AQF10-AE-FR drive is a basic 1336 PLUS II drive. It does not come with any interface modules, but it has installation slots for hosting optional interface modules for use in specific applications. The 1336F-AQF10-AE-FR drive comes with an EMC-rated IP20 enclosure and with a French language module. This drive can operate at 310V DC and at 200-240V AC. The 1336F-AQF10-AE-FR drive's nominal Hp rating is only 1 Hp.

1336F-B015-AN-ES

Manufactured by Allen Bradley/Rockwell Automation, catalog number 1336F-B015-AN-ES is an adjustable frequency AC drive. This device was designed to be part of the 1336 PLUS II product series. The 1336F-B015-AN-ES operates via an input voltage ranging from 380 - 480 volts AC. The rated power output of this AC drive is 15 horsepower (11 kilowatts). It features an open-style enclosure with an IP 00 protection rating.

1336F-B015-AN-FR

The 1336F-B015-AN-FR variable frequency drive from Allen-Bradley is a 1336 PLUS II variable frequency drive rated at 380-480V AC. Its kW output rating is 11 kilowatts and its Hp output rating is 15 Horsepower. The 1336F-B015-AN-FR drive comes with a French language module and with an open enclosure. This drive does not include any interfaces, but it has flexible analog I/O. The 1336F-B015-AN-FR drive supports real-time maintenance technology.

1336F-B015-AN-IT

The Allen-Bradley 1336F-B015-AN-IT 1336 PLUS II drive can control a 3-phase motor. It can control a 3-phase motor that requires high torque levels because it has sensorless vector control technology which is capable of producing higher amounts of torque than a drive of this type could normally produce or handle. The 1336F-B015-AN-IT drive is capable of operating in Italian or English and its voltage rating is 380V AC to 480V AC.

1336F-B020-AA-EN

Catalog number 1336F-B020-AA-EN is an Adjustable Frequency AC Drive. This device was produced by Allen Bradley as part of the 1336 PLUS II product series. This AC drive requires an input voltage ranging from 380 to 480 volts AC to operate. Additionally, the 1336F-B020-AA-EN outputs 15 kilowatts or 20 horsepower of power. It includes a NEMA Type 1 enclosure with an IP 20 protection rating.

1336F-B040-AA-EN

Part Number 1336F-B040-AA-EN is an AC Drive by Allen Bradley/ Rockwell Automation. It belongs to the 1336 PLUS II product series. It is widely known as a variable-speed drive (VSD). It runs on a 3-phase AC power supply. And it supports 40 Horsepower or 30 kW output ratings. And it operates within the 308 to 480V AC range. In addition, it can be housed in a NEMA UL Type 1 / IP20 (rated) enclosure.

1336F-B050-AN-EN

The Allen Bradley Bulletin-1336F open-drive, Model ID 1336F-B050-AN-EN, comes with the default English language for instructions. The drive has a nominal 50 HP power rating, while the input voltage supply ranges from 380 to 480 Volts of AC. This C frame drive does not support single-phase input. Drive draws 73 Amperes of input current and 48 to 60 kVA output power, respectively. The drive also supports over-temperature protection thanks to microprocessor-based heatsink thermistor monitoring.

1336F-BRF07-AN-EN

The 1336F-BRF07-AN-EN Adjustable Frequency AC Drive was designed and produced by Allen Bradley as part of the 1336 PLUS II product line. The voltage rating of this device ranges from 380 to 480 VAC or 513 to 620 VDC. Additionally, the power output rating of this product is 0.56 kW (0.75 Hp). The 1336F-BRF07-AN-EN includes an open-type enclosure with an IP00 protection rating.

1336F-BRF10-AN-EN

The Allen-Bradley 1336 PLUS II 1336F-BRF10-AN-EN drive was designed to operate at 380-480 Volts AC or at 513-620 Volts DC. It is capable of generating 1 Hp of nominal output during operation. The 1336F-BRF10-AN-EN drive can support a communication module, an HMI, a control interface, and 2 analog I/O interfaces, but it does not come with any of these devices. The enclosure of this drive is an IP00-rated open enclosure.

1336F-BRF75-AE-EN

The 1336F-BRF75-AE-EN drive is an Allen-Bradley 1336 PLUS II drive that is able to operate with AC voltage or with DC voltage. It has an AC voltage rating of 380-480V AC and a DC voltage rating of 513-620V DC. The 1336F-BRF75-AE-EN drive's enclosure has an ingress protection rating of IP20 and an EMC rating for protection from electromagnetic interference. The nominal output ratings of the 1336F-BRF75-AE-EN drive are 5.5 kilowatts and 7.5 Horsepower.

1336F-BX060-AA-EN

The Allen-Bradley 1336F-BX060-AA-EN drive is a 1336 PLUS II motor control drive with a special voltage rating and an output rating of 60 Horsepower or 45 kilowatts. It is microprocessor-based. The 1336F-BX060-AA-EN drive is compatible with Allen-Bradley SLCs and PLCs. It features sensorless vector technology which it can use in applications that require high torque. The 1336F-BX060-AA-EN drive's only language option is English, unless its English language module is replaced with a module for a different language.

1336F-MCB-SP1C

The Allen-Bradley 1336F-MCB-SP1C PC board from the 1336 PLUS II series is designed to be used as a main control board in a 1336 PLUS II series drive. It is a spare part that can be used to replace a damaged main control board in a drive. The 1336F-MCB-SP1C PC board is compatible with most of the drives in the 1336 PLUS II product line since these drives are all designed with similar layouts and features.

1336F-B075-AN-EN-L6

The 1336F-B075-AN-EN-L6 from Allen Bradley is a 1336 PLUS II-series AC drive. It has a voltage rating that ranges from 380 volts AC to 480 volts AC. It outputs 56 kilowatts or 75 horsepower of power. The control interface of the 1336F-B075-AN-EN-L6 AC drive has a rating of 115 volts AC.

1336F-MCB-SP1F

This Allen Bradley main inverter control circuit board, Catalog ID 1336F-MCB-SP1F, is part of the 1336F Plus II AC drive series. It is designed for drives of B-G frames, and it has a TB2 terminal strip that can be used for the Variable frequency drive I/O connection. A single 1336F-MCB-SP1F circuit board is connected to a 1336F drive and requires an input power of 115 Volts AC. A multimeter can be used to measure and confirm the capacitor's charge. The board replacement won't start until the capacitor is completely discharged.
Previous 1

...

24 25 26 27

Next

Displaying 31 of 1331 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP