GE / IP FANUC Series 90/30 In Stock
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Browse our selection of 8520 CNC Controllers units
AutomationStop.com's online catalog offers one of the largest selections of preowned 8520 CNC Controllers units in the world.
8520-32MB3
The Allen-Bradley 8520-32MB3 PC board is an 8520 CNC controller series motherboard. This motherboard supports 380-460V AC of input voltage at 50 to 60 Hertz of frequency. The 8520-32MB3 motherboard can support up to 100,000 Amps of short circuit current. Its output voltage is DC voltage and the output voltage rating it supports is 530-680V DC with 15 Amps of DC output current and 8-10 kilowatts of DC output power.
8520-4S5A-EX4-S-1-4
The catalog number 8520-4S5A-EX4-S-1-4 refers to a CNC controller unit suitable for deployment in both commercial and industrial contexts. The Bulletin 8520 series by Allen-Bradley/Rockwell Automation encompasses 4-axis CNC controllers compatible with this system module. The 8520-4S5A-EX4-S-1-4 system module can accommodate input voltages ranging from 380 to 460 AC and has a 5-kilowatt power output capacity. It is designed to operate on three-phase electricity with frequencies between 50 and 60 hertz and can sustain a maximum current of 15 Amperes, with a minimum rated current of 6.5 Amps.
8520-AA21
The 8520-AA21 amplifier module is a digital amplifier module from the Allen-Bradley 8520 CNC controller line. It is a single-axis type of amplifier module with a current rating of 21 Amperes. The 8520-AA21 amplifier module comes with a Teflon shaft seal that protects its shaft. This amplifier module is used to ensure that the servo motor in the CNC controller system is receiving the correct amount of power for operation, and it can amplify a power signal that needs to be stronger than it is to power the motor.
8520-ASM3
The 8520-ASM3 is a crucial component all Allen Bradley 8520 CNC machines require. Part of the series 9 CNC PAL group of switches, it includes an analog servo module for industrial applications with 03 axes. This 8520-ASM3 module can be configured for either mill or lathe analog driving setups. Each of the mill's three axes can be independently controlled using dedicated servos and feedback mechanisms included in the configuration. Applications that require fine-grained control over multiple axes of motion, such as milling, can greatly benefit from this setup.
8520-ENC4
The Allen-Bradley 8520 CNC controller series 8520-ENC4 servo module is a 4-axis digital servo module. This module should be installed in an enclosure to protect it from dust and moisture in its operating environment. The 8520-ENC4 servo module supports 2 kilohertz of rated PWM output frequency. The 8520-ENC4 digital servo module can receive feedback while it operates and the feedback it supports includes position feedback and current feedback.
8520-FOP
The 8520-FOP operator interface is an Allen-Bradley Bulletin 8520 CNC controllers series operator interface. It is an HMI or human-machine interface with a keypad control option, but no touchscreen control option. The 8520-FOP operator interface has a display screen that is 10.5 inches wide. It can be installed securely in the panel door of a compatible industrial drive or control device. The 8520-FOP operator interface can receive video input and display the video input on its 10.5-inch screen.
8520-KBI2
The Allen-Bradley 8520-KBI2 interface is a keyboard type of interface for 8520 CNC controller systems. Its power rating is 5 Volts DC. The 8520-KBI2 keyboard interface also has an I/O ring that is compatible with fiber-optic cables. The voltage that the keyboard operates with is supplied by the operator panel that it is connected to in the CNC system. The 8520-KBI2 keyboard interface's node address needs to be set by the users before the interface can be used.
8520-MOP7
The Allen-Bradley 8520-MOP7 monitor is an 8520 CNC controllers series replacement monitor device. It can be used to replace an LCD monitor in an Allen-Bradley Bulletin 8520 industrial interface device. This replacement monitor is easy to install in the host interface device with the mounting holes that are included in the interface. The 8520-MOP7 monitor has a chassis made of steel. It can support keypad control. The 8520-MOP7 replacement monitor weighs approximately 19.8 pounds.
8520-MTB2
The Allen-Bradley 8520-MTB2 is a CNC operator interface panel designed by Rockwell Automation. This panel is a type of input/output device that enables users to interact with the 9 Series CNC system. The 8520-MTB2 provides a graphical user interface that displays information about the machine, such as status and performance metrics, and allows users to control the system's functions. This operator interface panel is a reliable and user-friendly solution for machine tool applications. It provides real-time information to operators, enabling them to make informed decisions and improve productivity.
8520-MTBL
The Allen Bradley 8520-MTBL module is an input/output operator panel with LEDs designed for use with machine tools. It is an I/O card and button panel in one, created specifically for the 9/series of CNC machines. The 8520-MTBL panel's buttons are control inputs for the system's various functions. This fiber optic panel is linked to the rest of the system via optic fiber and features 44 inputs and 18 outputs.
8520-OPS1
The Allen-Bradley 8520-OPS1 monitor powers the Human-Machine Interface of the 9/Series CNC operator panel. This device powers the hand pulse generator (jogging mode), MTB panel I/O module (switches and pushbuttons), and keyboard I/O ring interface board. The monochrome and color flat panel displays and the MTB panel I/O module are all fueled by a 12 Volts DC supply. However, its keyboard I/O ring port and the hand pulse generator receive around 5 Volts DC.
8520-PS1A
The Allen-Bradley 8520-PS1A power supply module is a power supply from the 8520 CNC controllers series. At 50/60 Hertz, the 8520-PS1A power supply supports an input voltage rating of 115/230 Volts AC. The 8520-PS1A power supply also supports an input current rating of 8/5.5 Amperes. This power supply is designed to be used as a main power supply in an industrial system and it can supply power to the system's processor module.
8520-S10
The Bulletin 8520 from Allen-Bradley features the 8520-S10, a 10kW CNC motor drive module. This resolver-based system program contains a digital servo drive with useful functions for controlling CNC machines. As a result of its capacity for integrating CNC programming & motor driving tasks, it is often used as a basis for constructing lathes & milling machines. The 8520-S10 may be used for prototyping & small-batch production, as well as for creating high-quality, precision components.
8520-S5
The Allen-Bradley 8250 CNC controllers series 8520-S5 drive can operate with 3-phase AC input voltage and 1-phase DC output voltage. Its input voltage range is between 380 and 460 Volts AC and its output voltage range is between 530 and 680 Volts DC. The 8520-S5 drive can produce 5 kilowatts of power with 7.5 Amps of current. This drive also includes a CNC interface and a fiber-optic type of I/O ring for communication.
8520-SM4
The Allen-Bradley 8520-SM4 servo card is designed for 9/260 or 9/290 CNC systems. It can control up to four closed-loop axes and one open-loop axis, making it an ideal choice for digital (1394) or analog servo motor applications. The servo card is compatible with analog and 1394 digital servo motors and can be configured to connect both types to the same servo card for different axes. This servo card provides reliable and accurate control for various industrial applications.
8520-MTB
The 8520-MTB operator control panel is an Allen-Bradley manual control panel from the 8520 CNC controllers product line. It is designed to be multifunctional and to be able to support a variety of specific application requirements. The 8520-MTB operator control panel has several keys that are user-customizable and its ingress protection rating is IP20. It can support the DeviceNet network but it does not come with a display screen.
8520-ENC3
The Allen Bradley 8520-ENC3 is a 9/260-series axis board that requires 115-230 VAC power, 50-60 Hertz, and 6/3 A of amplifier current. It can handle eight servo axes, letting users choose axes that correspond to letters or numbers shown on the screen. The 8520-ENC3 stands about 14 inches in length, 2 inches in height, and about 7 inches across. It weighs around 0.678 kg. The controls for this part's installation should be purchased for a quick and easy setup.
