GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Allen Bradley - HMI

Panelview Plus 600

PanelView Plus 600 Terminals

PanelView Plus 600 Terminals from Allen Bradley are HMIs (human-machine interfaces) that have units with base configurations, come with an AC or DC power supply, are equipped with communication modules, and cover both color and grayscale displays. These terminals also have a USB port and CompactFlash card slot. Some important features of PanelView Plus 600 terminals are here to explore novelty in the product.

Base-Configured Units

PanelView Plus 600 Terminals have two versions of base-configured units:

  • One version of the unit is equipped with one USB port and an RS-232 port
  • The other version of the base-configured unit comes with a 10/100BaseT Ethernet port, an RS-232 port, and one USB port. It also has one network interface to support a communication module.

Power Input Options

Allen Bradley has designed PanelView Plus 600 terminals to work with AC (represented with code ‘A’ in catalog number) or DC (represented with code ‘D’ in catalog number) input supplies to furnish feasibility and flexibility in the application. AC signals could be anywhere from 85 to 264 volts with a frequency between 47 and 63 hertz. 600 terminals with an AC input power intake of 60VA maximum. Allen Bradley suggests its users connect the terminal to the secondary winding of a transformer when it is AC powered so isolation is ensured.

For DC terminals, DC signals could range between 18 and 30 volts. The power consumption for such a terminal is a maximum of 25W.  All PanelView Plus 600 DC terminals come with a DC power supply that is non-isolated. Anyhow, galvanic isolation is not provided by these power supplies. Class 2 DC-powered terminals might get the supply voltage from a DC source that is isolated, provided the indicated fuse kit is used. Using such isolated, separate, and ungrounded power supplies to power every terminal will protect terminals from damage that could be caused by loop currents in the ground connections.

The power input must also be protected by the use of a fuse or circuit breaker which must be rated below 15A. The routes of power supply lines to the terminal should be separate from communication lines. The cables should be shielded and grounded to prevent EMI (Electromagnetic Interference). This connection is also important from a safety point of view. Terminal units are provided by the manufacturer with an installed power terminal block. This block can be removed to ease maintenance, wiring, and installation.

Instruction Input Options

Instruction input to these terminals is be given in three different ways:

  • Keypad (represented with code ‘K’ in catalog number)
  • Touch screen (represented with code ‘T’ in catalog number)
  • Keypad and Touch screen (represented with code ‘B’ in catalog number)

The touch screens of these terminals are designed as analog resistive to receive touch input. These screens are operable with just a finger. Plastic stylus devices can also be used on the touchscreen. Anyhow, Allen Bradley suggests using a tip radius of 1.3mm for this device to avoid any sort of damage. The manufacturer also forbids the use of any other tool, device, or object to operate the screen as it might damage it.

When it comes to the keypad of PanelView Plus 600 terminals, it consists of the following keys:

  • F1 through F10 programmable keys which are to start different functions on the terminal screen. To provide for custom function labels on the keys, replaceable legends are also available.
  • Keypad on PanelView Plus 600 terminals has a numeric keypad, which includes keys numbered 0 through 9, enter, backspace, right tab, left tab, and shift keys
  • The third kind of key on the keypad is the navigation keys, which includes 4 arrow keys to ease navigation through different entries on the screen. These keys are also used to perform page up, page down, end, and activate home functions when used with the Alt key.

Display Options

PanelView Plus 600 terminals have a 5.5-inch screen (represented with code ‘6’ in catalog number), which could have either grayscale graphics (represented with code ‘M’ in catalog number) having a resolution of 320 X 240 pixels or colored graphics (represented with code ‘C’ in catalog number) display. This display is FSTN (film compensated super twist nematic). For both displays, the display area is 112 X 84 mm or 4.4 X 3.3 inches. The typical luminance of the screen on these terminals is 300 cd per square meter Nits. The terminal’s screen has a CCFL (Cold Cathode Fluorescent Lamp) backlight with a minimum of 50,000 hours of life. This display screen needs 10 to 110g operating force.

Battery and Clock

PanelView Plus 600 terminals also have a battery for backup, which has an estimated life of 5 years minimum if kept at 25 ˚C. This battery provides backup power for the clock also. Anyhow, a difference or error of +/- 2 minutes can occur in this clock.

LED Indicators

PanelView Plus 600 terminals feature LED (light-emitting diode) indicators to facilitate its users' quick checkups. Green-colored LED denotes COMM and that normal operation is running. If an LED turns red, it indicates some fault in the operation of the terminal.

Memory Storage Option

Allen Bradley has incorporated application flash memory within the PanelView Plus 600 terminals. Series A terminals have a flash memory of 5 MB, while it is 10 MB for series B or later terminals. To enhance device usability, the option of external CompactFlash storage is also available, which can go up to 512 MB.

USB Ports

PanelView Plus 600 terminals are equipped with a USB (Universal Serial Bus) port. The open-circuit voltage, Voc, of the host port in the circuit of this terminal is 5.25 volts DC, and the maximum output current, Isc, from the host USB is 1.68 amperes. The maximum voltage and maximum current should remain below the DC voltage and short circuit current.

Compatible Peripheral Devices

A range of USB peripheral devices can be used with Allen Bradley terminals to perform select, choose, type, and click options. Below is a list of compatible devices:

  • USB keyboard
  • Optical USB mouse
  • USB mouse
  • USB hub

Communication Modules

As stated earlier, the one version of the base-configured units supports a network interface, which provides the option of using a communication module. These modules are used to enhance the communication capability of the system with ControlNet, Isolated RS-232 (represented with code ‘5’ in catalog number), DH+, and DH-485. A communication module for PanelView Plus 600 terminals can be installed easily via the backs of the terminals.

Environmental Compatibility

PanelView Plus 600 terminals may be used in the following types of environments:

  • Ordinary and non-hazardous locations
  • Class III environments
  • Group F and G from Division 2, Class II environments
  • Group IIC from Zone 2, Class I environments
  • Groups A, B, C, and D from Division 2, Class I environments

In any case, users are instructed to ensure that the surrounding area is non-hazardous and that the power has been removed before disconnecting equipment or connections. The same is to be ensured before replacing the real-time clock or a battery. If the user substitutes some components, then the final category of environments may become unsuitable. Allen Bradley notifies that these terminals should not be used in environments with atmospheric gases having an ignition temperature of below 135 ˚C. Appropriate wiring instructions and codes from the National Electrical Code or Canadian Electrical Code must also be followed for safe operation in any environment.

When these terminals are operated in an area with a maximum temperature of 55 ˚C, then temperature code T4 is applicable. The storage or non-operating temperature of PanelView Plus 600 terminals ranges from -25 ˚C to 70 ˚C. These terminals dissipate 85 BTU per hour. The relative humidity of the environment where the terminal is to be placed can range between 5% and 95% with no condensation. The operating altitude for these terminals is up to 2000 meters. The terminal can operate well with an operating shock ranging up to 15g for a duration of 11 milliseconds. On the other hand, these devices can bear a non-operating shock of 30g for a duration of 11 milliseconds.

Terminals Sizes/Dimensions

PanelView Plus 600 terminals are designed as a smart product. Its dimensions vary as the instruction input method varies. Terminals having a keypad or both a keypad and touchscreen have a 268mm width and a 167mm height. Terminals with just a touchscreen have a height of 152mm and a width of 185mm.

Terminal Mounting or Installation

Allen Bradley provides PanelView Plus 600 terminals to its users as an open type of equipment. Therefore, an enclosure must be used to mount these devices. Enclosure selection must be done carefully so it complies with all the specific and relevant environmental conditions. The enclosure should be designed appropriately so there could be no access to live parts of the terminal, terminating the chances for personal injury. Moreover, the interior should be accessible by the use of appropriate tools only.

The selection of an enclosure is extremely important because if the terminal is mounted in an enclosure that is not equivalent to the terminal in its ratings, then the NEMA and IEC ratings for the terminal also do not comply.

The selection of an appropriate enclosure and terminal orientation becomes even more important when the device is being used as a high bright display module or used outdoors. The material used in the buildup of the terminal bezel is to ensure prolonged field life of the device, though proper installation will extend the life further.

Infrared and ultraviolet radiations affect the field life of electronic devices negatively, fading their colors and making their material brittle. Therefore, it is encouraged to use an antiglare overlay. Such overlays protect the device from direct UV exposure.

Furthermore, if the front of the terminal front is exposed to direct sunlight during the hottest hours and the temperature of the surrounding environment exceeds 40 degrees Celsius, then the use of a visor kit is highly recommended. This kit helps in maintaining the internal temperature within a specified limit and reduces the solar load on the front part of the terminal.

Despite all precautions and measures, if the cabinet temperature exceeds 55 ˚C, then the built-in sensors signal the system to reduce the backlight intensity automatically. Furthermore, the manufacturer suggests the use of active cooling or stirring fans in high temperature (above 55 ˚C) environmental conditions or at high altitudes. If the temperature goes below 0 ˚C, then installation of a heater is recommended.

Browse our selection of Panelview Plus 600 units

AutomationStop.com's online catalog offers one of the largest selections of preowned Panelview Plus 600 units in the world.

2711P-T6M20D

The Allen Bradley 2711P-T6M20D is a touchscreen operator interface terminal made by Rockwell Automation. This panel view plus module has a display of 5.5 inches. The touch screen is analog resistive and is rated for 1 million presses. It has built-in Ethernet, RS-232, and 2 USB host ports. Aside from that, it is a DC-powered device with a maximum power consumption of 25 Watts (1.0 A at 24 V DC).

2711P-T6M3A

The 2711P-T6M3A is an operator interface terminal from Allen Bradley. It is presented in the PanelView Plus 600 product line. This module has a touchscreen, and its display size is 5.7 inches. The display color of the unit is monochrome, and its touch is also analog resistive. In addition, it comes with a battery-backed real-time clock (RTC) and built-in Ethernet, RS232, and USB ports.

2711P-T6M3D

The Allen-Bradley 2711P-T6M3D is a PanelView Plus 600 Grayscale Terminal. It operates with 18-32V DC power. It has a power consumption of 25 Watts and measures 111x84 mm. This device has an analog resistive touchscreen for input and a modular communication interface that allows it to be used across the product range. It is designed for easy installation with minimal effort required. It is a reliable and efficient choice for your industrial control applications.

2711P-T6M5A

The 2711P-T6M5A is an Allen Bradley operator interface terminal. It is a panel view module from bulletin 600. And it has a 5.5 inches display with a resolution of 320 x 240 pixels and an analog resistive touch. It can run on an AC power supply ranging from 100 to 240V. This unit comprises three parts: a logic module, a communication board, and a display panel, and it is used to provide a rugged interface to machines.

2711P-T6M5D

The 2711P-T6M5D is a PanelView Plus 600 operator terminal with a touchscreen graphic display. This terminal provides real-time monitoring and excellent control of industrial devices through its human-machine interface. The device can work at 24 Volts DC and handle voltages ranging from 18 to 32V. It has a 5.5 inches monochrome display and supports RS232 and USB interfaces for communication. It also meets the IP66 and NEMA 12 standards.

2711P-T6M8A

The Allen-Bradley 2711P-T6M8A operator interface terminal is a powerful solution for monitoring and managing industrial machinery. It is part of the PanelView 600 series and features a 5.7-inch color display. The terminal's touchscreen input allows for easy navigation and control of connected equipment. With a large memory capacity of 32 MB flash and 64 MB RAM, it can handle large amounts of data and process it quickly with a processing speed of up to 1 GHz.

2711P-T6M8D

The 2711P-T6M8D is an Allen Bradley module that provides an excellent graphical interface to operators and communication features with built-in ports. This unit can be best described as a human-machine interface (HMI) since it reduces the gap between men to machines. It is available in 5.7 inches (monochrome) colored display with a resolution of 320 x 240 pixels. And its display type is color active matrix film compressed super-twist nematic (FSTN).

2711P-T6C5D

The 2711P-T6C5D is a Display Module from Allen Bradley. It is a touch-controlled graphic terminal that functions as an HMI (Human Machine Interface). This terminal has a 5.5 (inches) active color matrix display, which is excellent for the operator interface. The unit has an analog resistive touch and a 1 million press actuation lifespan. This PanelView Plus module has a 320X240 resolution and can be powered by 24 Volts of Direct Current.

2711P-T6C5A

The 2711P-T6C5A is a graphic terminal used as an operator interface terminal. This module is suitable for the PLC and SLC devices from Allen Bradley. And it is currently featured in the PanelView Plus 600 series. The unit operates with AC 120 Volts and has a 5.5 inches color display. The main input type of this module is a touchscreen, and its touch is analog resistive. The internal memory capacity of the terminal is 256 RAM.

2711P-T6C3D

The 2711P-T6C3D is a standard operator terminal with a 5.5 inches color display. This terminal has 320 x 240 resolution, and its touch is analog resistive. In addition, it is also referred to as a human-machine interface (HMI) since it allows users to monitor and control industrial devices with flexibility. This electronic interface equipment is also compatible with Allen Bradley's PLC and SLC controllers.
Previous 1 2

Next

Displaying 10 of 60 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP