GE / IP FANUC Series 90/30 In Stock
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Browse our selection of TLY and TL Servo Motors units
AutomationStop.com's online catalog offers one of the largest selections of preowned TLY and TL Servo Motors units in the world.
TL-A130P-BJ32AA
The TL-A130P-BJ32AA is a low-inertia brushless AC synchronous servo motor from the TL series by Allen Bradley. It is designed for use in industrial motion control systems. It features a conventional metric mounting, a frame size of 1.81 inches (NEMA 17), rectangular cable connectors, and an IP65-rated dust and watertight casing. The motor has a 17-bit high-resolution encoder feedback system with battery backup. It has a continuous stall torque of 0.325 N-m (with a peak of 0.76 N-m), a base rotor speed of 5000 RPM at a nominal motor voltage of 230 VAC, and an output power of 0.14 kilowatts.
TL-A220P-HJ32AA
The TL-A220P-HJ32AA motor is a 230 Volts AC-powered, compact, low-inertia, permanent magnet servo motor from the Allen-Bradley TL motor product line. It operates with incremental feedback that it receives from an incremental encoder. The TL-A220P-HJ32AA motor has a shaft that can rotate at speeds as high as 5000 RPM. It has a mounting pilot feature that makes it easy for the users to align it properly on the machine that it is intended to be mounted on.
TL-A220P-HJ32AN
The Allen-Bradley TL series TL-A220P-HJ32AN permanent magnet servo motor comes with a 2000-line incremental encoder that supplies it with feedback as it operates. It also comes with a keyed shaft, but it does not come with a shaft seal. The TL-A220P-HJ32AN motor can support a rated shaft speed of 5000 RPM and a voltage rating of 230V AC. This servo motor has low inertia ratings and the same standard features as every other TL series servo motor model.
TL-A230P-BJ34AA
The Allen-Bradley TL-A230P-BJ34AA motor is a TL series 8-pole servo motor with wye winding. It was designed to operate at 230V AC of voltage and at 5000 RPM of rated speed. The TL-A230P-BJ34AA motor's stall torque ratings are 1.16 N-m (continuous) and 3.05 N-m (peak). Its continuous output rating is 0.32 kilowatts or 0.43 Horsepower. The TL-A230P-BJ34AA motor includes a shaft key and a 24V DC spring-set holding brake.
TL-A230P-HJ34AN
The Allen-Bradley TL-A230P-HJ34AN motor is a 3-stack permanent magnet motor available in the Allen-Bradley Bulletin TL line. It is known as a 3-stack motor because it has 3 magnet stacks. The TL-A230P-HJ34AN motor has a NEMA mounting flange or shaft option and a 24V DC spring-set holding brake. Its feedback encoder is an incremental encoder (2000 lines). The TL-A230P-HJ34AN motor can support 5000 RPM of maximum speed when it operates.
TL-A2530P-BJ32AA
The Allen Bradley TL-A2530P-BJ32AA motor is a low-inertia permanent-magnet servo motor. Allen-Bradley features it in their TLY & TL line of industrial servo motors. The motor's 3-inch magnet stack is made out of permanent magnets, allowing it to run with little inertia & friction. The TL-A2530P-BJ32AA motor has a maximum speed of 5000 RPM and an operating voltage of 230 Volts AC. In addition, it has a multi-turn feedback encoder powered by batteries.
TL-A2530P-HJ34AN
The TL-A2530P-HJ34AN servo motor is an Allen-Bradley 230V AC-rated servo motor in the TL series. It is equipped with a holding brake that is spring-set and DC-powered. The TL-A2530P-HJ34AN motor is also equipped with an incremental feedback encoder. The highest speed that this motor's shaft can rotate at is 6000 RPM. The TL-A2530P-HJ34AN motor includes a NEMA type of mounting flange or shaft. It also includes a shaft key that can be installed in its shaft's keyway.
TL-A2540P-HJ32AN
The TL-A2540P-HJ32AN motor is a compact servo motor with low inertia ratings from the Allen-Bradley TL series. The approximate weight of this compact motor is 5.7 pounds and it comes in an IP65-rated protective housing. The TL-A2540P-HJ32AN motor's shaft can rotate at up to 5000 RPM. This motor does not have a holding brake to hold it shaft at a standstill. The TL-A2540P-HJ32AN motor contains powerful rare-earth magnets. Its encoder option is an incremental encoder.
TL-A2540P-HJ34AA
The TL-A2540P-HJ34AA servo motor is an Allen-Bradley Bulletin TL servo motor equipped with wye winding, 4 magnet stacks, 8 poles, an IP65 enclosure, a 24V DC holding brake, and a 2000-line incremental feedback encoder. Its 3-phase AC operating voltage rating is 230 Volts AC, and its maximum rated operating speed is 5000 RPM. If the TL-A2540P-HJ34AA motor's shaft needs to be held at 0 RPM after the shaft has stopped rotating, the motor's holding brake can hold the shaft at 0 RPM. The holding brake can be used to stop the shaft sometimes, but it should not be used to stop it regularly.
TL-A410M-BJ32AA
The TL-A410M-BJ32AA permanent magnet servo motor was manufactured by Allen-Bradley as a Bulletin TL permanent magnet servo motor with a single magnet stack. This motor also comes with 8 poles and with wye winding. The TL-A410M-BJ32AA motor's enclosure has an ingress protection rating of IP65 and this enclosure is not ventilated. It can support 5.42 N-m of continuous stall torque and 13 N-m of peak stall torque. The TL-A410M-BJ32AA motor's shaft is made of steel.
TL-A410M-HJ32AA
The Kinetic TL series TL-A410M-HJ32AA Servo Motor manufactured by Allen Bradley / Rockwell Automation is a high-performance motor designed for industrial applications. It generates a high torque output of 5.42 Nm and features a 2000-line incremental feedback mechanism that provides precise feedback on motor position. The TL-A410M-HJ32AA motor operates on a 460V AC power supply and is IP65 rated for protection against dust and water. It can achieve fast and accurate motion with a maximum speed of 3000 rotations per minute (RPM).
TLY-A110P-BJ62AA
The TLY-A110P-BJ62AA motor is an Allen-Bradley TLY series servo motor with several of the same standard features as Allen-Bradley TL series servo motors plus some enhancements. The TLY-A110P-BJ62AA motor's TLY series enhancements include new types of connectors which are durable, a 1-meter cable, and protective shielding and grounding features. Its operating ratings include 5000 RPM of rated speed and 230 Volts AC of rated voltage. The TLY-A110P-BJ62AA motor can be used with an Allen-Bradley Kinetix 2000 series drive.
TLY-A110T-HJ62AA
The Allen-Bradley TLY-A110T-HJ62AA servo motor is a 230V AC-rated servo motor from the Bulletin TLY product line. Its cable connectors are circular cable connectors. The TLY-A110T-HJ62AA motor should be installed with its cable entry points positioned below its housing, and all of the cables connected to the motor should have drip loops. The rated operating speed of the TLY-A110T-HJ62AA motor is 6000 RPM. The TLY-A110T-HJ62AA motor has 1 magnet stack.
TLY-A110T-HJ64AA
The TLY-A110T-HJ64AA is a permanent magnet servo motor by Allen Bradley as part of the Kinetix TLY series. This motor features a higher torque rating and smart motor technology and is designed to operate with 200 VAC at a rated rotational speed of 6000 rev/min. It is equipped with a 2000 lines/revolution-based incremental encoder for feedback and a holding brake that operates on 24 VDC. The motor is mounted on a NEMA 17-rated flange, enclosed in an IP65-rated housing with a shaft, and comes with circular connector cables that are one meter in length.
TLY-A120P-BJ62AA
The TLY-A120P-BJ62AA is a low-inertia servo motor from the Kinetix TLY series Allen Bradley/ Rockwell Automation offers. This servo motor operates on 200 Volts AC and provides a rotational speed of 5000 rotations per minute (RPM). It is used in various industrial applications for precise control. The TLY-A120P-BJ62AA motor features a multi-turn absolute encoder feedback option, an IP65-rated protective enclosure with a shaft key, and a NEMA 17 frame (46mm); however, it does not include a braking system.
TLY-A120T-HK62AA
The motor model #TLY-A120T-HK62AA is a low inertia servo motor in the TL series by Allen Bradley. It provides high precision in rotational or linear motion control applications. This motor can operate on 230V AC, delivering a speed of 6000 revolutions per minute, featuring an IP65-rated housing with a keyless shaft and 46mm bolt circle frame. The TLY-A120T-HK62AA motor also has an incremental encoder feedback option that provides 2000 lines/revolution and complies with CE, CSA, and UL standards.
TLY-A120T-HK64AN
The Allen-Bradley TLY-A120T-HK64AN motor is a Bulletin TL/TLY low inertia servo motor with a circular connector option. Its voltage rating is 230 Volts AC and its rated speed is 6000 RPM. The TLY-A120T-HK64AN servo motor has an incremental encoder that it uses for feedback and this encoder is rated at 2000 lines. The motor's housing or enclosure has an ingress protection rating of IP65. The TLY-A120T-HK64AN servo motor also has a NEMA mounting flange and a 24V DC brake.
TLY-A130P-BJ62AA
The TLY-A130P-BJ62AA motor comes with an absolute feedback encoder that is battery-backed. It is an Allen-Bradley servo motor from the TLY series of low-inertia servo motors that support durable circular cable connectors. The TLY-A130P-BJ62AA motor also has enhanced shielding and grounding features for safety. Its rated speed is 5000 RPM and its voltage rating is 230 Volts AC. This motor supports semiconductor applications, material handling applications, and industrial assembly applications.
TLY-A130P-BJ64AA
The Allen-Bradley TLY-A130P-BJ64AA motor includes a 1-meter cable and it supports circular cable connectors because it is a TLY series Allen-Bradley servo motor. It also supports a 24V DC-rated holding brake and it has brake leads which are incorporated into its power connector. The TLY-A130P-BJ64AA motor's power cable should be shielded. This motor's shaft includes a shaft key that can support a rigid mechanical connection and even self-alignment if it is properly installed in the keyway.
TLY-A130T-HJ64AA
The Allen-Bradley TLY series TLY-A130T-HJ64AA servo motor uses feedback provided by an incremental encoder during operation. The shaft of the servo motor supports a rotation speed of up to 6000 RPM. If the TLY-A130T-HJ64AA motor's shaft needs to be kept at a standstill after it stops, it can be held in place by the motor's 24V DC holding brake. The TLY-A130T-HJ64AA motor has a voltage rating of 230V AC.
TLY-A130T-HK62AA
The Allen-Bradley TLY-A130T-HK62AA servo motor is TLY series motor which can be used to replace a compatible Y series motor and which can be used in a variety of assembly applications alongside a compatible Kinetix series drive and a compatible CompactLogix series controller. It has a voltage rating of 230 Volts AC and it supports a maximum operating speed of 6000 RPM. The TLY-A130T-HK62AA motor contains permanent magnets and it comes in an IP65 enclosure.
TLY-A130T-HK62AN
The Allen-Bradley/Rockwell Automation TLY-A130T-HK62AN motor is a servo motor which is synchronous, rotary, and AC-powered. It is powered by 230 Volts AC and it is available through the TLY series of Allen-Bradley rotary servo motors. The TLY-A130T-HK62AN motor can sustain shaft speeds of up to 6000 RPM. It has an IP65-rated housing to protect it from debris, dust, and moderate amounts of water and other liquids. The TLY-A130T-HK62AN motor contains powerful magnets.
TLY-A130T-HK64AA
The TLY-A130T-HK64AA low-inertia-rated rotary servo motor is an Allen-Bradley TLY servo motor with an incremental encoder. This incremental encoder is rated at 2000 lines per revolution. The TLY-A130T-HK64AA servo motor's AC voltage rating is 230V, and its operating speed rating is 6000 RPM. Its brake option is a 24V DC brake and its enclosure option is an IP65 enclosure. The TLY-A130T-HK64AA motor does not include a shaft seal but it is compatible with optional shaft seals that can protect the shaft from moisture.
TLY-A220P-BJ62AA
The Allen-Bradley TLY series TLY-A220P-BJ62AA motor is a 230V AC-rated servo motor with a battery-backed encoder for feedback, an IP65 enclosure for protection, and a metric mounting option. It also has a carbon steel shaft key that can support a rigid mechanical connection. The TLY-A220P-BJ62AA motor is compatible with some of the Allen-Bradley servo drives in the Kinetix 2000 line. It supports a maximum shaft rotation speed of 5000 RPM.
TLY-A220P-BJ64AA
The TLY-A220P-BJ64AA motor is an Allen-Bradley TLY series servo motor that contains high-energy permanent magnets. It also operates with low inertia levels. The AC voltage rating of the TLY-A220P-BJ64AA motor is 230V AC, and its shaft can rotate at 5000 RPM maximum. The motor's power cable needs to be shielded and the shield for the cable needs to be connected to a ground. The TLY-A220P-BJ64AA motor has a battery-backed feedback encoder.
TLY-A220T-HJ62AN
The Allen-Bradley TLY-A220T-HJ62AN motor is a small and compact servo motor from the TLY series that requires cables with circular connectors. This motor weighs approximately 2.93 pounds and it can operate at 6000 RPM of rated speed on 230 Volts AC of rated voltage. The TLY-A220T-HJ62AN motor has an IP65 enclosure to protect it from dust and moderate amounts of moisture. This motor also has 2 magnet stacks.
TLY-A220T-HJ64AA
The TLY-A220T-HJ64AA motor is an Allen-Bradley TLY servo motor with a holding brake. This holding brake should not be used to stop the motor shaft on a regular basis, but it can hold the shaft in place after the shaft has come to a stop. The TLY-A220T-HJ64AA motor's highest rated shaft speed is 6000 RPM. Its voltage rating is 230 Volts AC. The TLY-A220T-HJ64AA motor has an incremental feedback encoder.
TLY-A220T-HK64AA
The Allen-Bradley TLY-A220T-HK64AA motor is a permanent magnet servo motor with a shaft that can rotate at up to 6000 RPM. It is a TLY series permanent magnet servo motor that has a voltage rating of 230V AC and that only supports cables with circular connectors. The TLY-A220T-HK64AA comes with a 1-meter cable which includes circular connectors. It also comes with a holding brake with is DC-powered and spring-set.
TLY-A230T-HJ62AA
The Allen-Bradley TYL series TLY-A230T-HJ62AA motor is a 230V AC-rated compact servo motor that has no holding brake. It also has no shaft seal, but the users can install an optional seal to protect the shaft and its front bearing from liquids or from fine dust particles. The TLY-A230T-HJ62AA motor's shaft rotates at up to 6000 RPM. The power cables for the TLY-A230T-HJ62AA motor need to be shielded cables.
TLY-A230T-HJ62AN
The Allen-Bradley TLY-A230T-HJ62AN TLY series servo motor is a 230V AC-rated servo motor that can be combined with a Kinetix 2000 servo drive and a CompactLogix L43 controller to create a motor control system for industrial applications which include semiconductor applications and material-handling applications. It comes with a carbon steel shaft key that is toleranced for a slip fit in the shaft's keyway. The TLY-A230T-HJ62AN motor can support a rated speed of 6000 RPM.
TLY-A230T-HJ64AA
The TLY-A230T-HJ64AA servo motor is part of the Allen-Bradley TLY product line and it is a rotary and synchronous type of servo motor with a voltage rating of 230V AC and a shaft speed rating of 6000 RPM. It includes a 24V DC brake and it also includes brake leads that are incorporated into its power connector. The TLY-A230T-HJ64AA motor has a feedback encoder that is rated at 2000 lines per revolution.
TLY-A230T-HJ64AN
The Allen-Bradley TLY-A230T-HJ64AN TLY series servo motor comes in a size 2 frame that has a mounting bolt circle diameter of 2.75 inches or 70 millimeters. It also features 3 magnet stacks and an incremental type of feedback encoder. The TLY-A230T-HJ64AN motor's AC voltage rating is 230 Volts, and its optional holding brake's DC voltage rating is 24 Volts. The holding brake is spring-set and not intended for use as a safety device.
TLY-A230T-HK62AA
The TLY-A230T-HK62AA is a compact servo motor by Allen Bradley. It can deliver high-precision and high-accuracy applications that require driving small and light loads. The TLY-A230T-HK62AA servo motor has an armature voltage rating of 230 V, a torque rating of 1.3 N-m, and an output power of 0.44 kW. It has a motor speed of 6000 revolutions per minute (RPM), a high-resolution 2000-line incremental encoder, and an IP65-rated NEMA 23 housing that ensures protection against dust and water ingress.
TLY-A2530P-HJ62AA
The Allen-Bradley TLY-A2530P-HJ62AA permanent magnet servo motor is compatible with cables that feature circular connectors. It is a Bulletin TLY type of Allen-Bradley servo motor, it is compatible with certain types of Allen-Bradley drives and controllers, and it is suitable for various material handling and assembly applications. The TLY-A2530P-HJ62AA motor has a voltage rating of 230 Volts AC. It also has an encoder which is incremental and a shaft that rotates at 5000 RPM maximum.
TLY-A2530P-HJ62AN
The TLY-A2530P-HJ62AN servo motor from Allen Bradley is a low-inertia, brushless servo designed for mechanical motion handling in a compact package. It features a standard enclosure with an IP65 rating, a NEMA 34 listed frame size, a rotational speed of 5000 RPM, and an inertia of 0.000098 kilogram-meters squared. This TLY-A2530P-HJ62AN servo motor has a base voltage rating of 230V alternating current, an output power of 0.69 kW, and a constant stall current of 10A (peaking at 21.1A).
TLY-A2540P-BJ62AA
The Allen-Bradley TLY-A2540P-BJ62AA motor has a magnet stack that contains permanent magnets made of rare-earth metals. It is a low-inertia servo motor from the TLY series of Allen-Bradley servo motors and it is compatible with Allen-Bradley Kinetix 2000 servo drives and Allen-Bradley CompactLogix L43 controllers. A motion control system made up of the TLY-A2540P-BJ62AA motor and a compatible drive and controller would be an efficient industrial motion control solution. The TLY-A2540P-BJ62AA motors voltage rating is 230V AC.
TLY-A2540P-HJ62AA
The TLY-A2540P-HJ62AA servo motor is a low-inertia type of motor with powerful permanent magnets. It is an Allen-Bradley TLY servo motor that is compatible with servo drives from the Allen-Bradley Kinetix 2000 series and with controllers from the Allen-Bradley CompactLogix L43 series. The TLY-A2540P-HJ62AA motor can operate at 230V AC of rated voltage. Its power cable must be a shielded cable and all of its cables must have circular connectors.
TLY-A2540P-HJ64AN
The Allen-Bradley TLY-A2540P-HJ64AN Bulletin TLY servo motor's mounting shaft or flange is a NEMA mounting shaft or flange, its enclosure is an IP65 enclosure, and its encoder is a 2000-line incremental encoder. Additionally, the TLY-A2540P-HJ64AN motor's rating include 230V AC of voltage and 5000 RPM of maximum shaft rotation speed. The TLY-A2540P-HJ64AN servo motor can be used in an integrated motion control system along with a Kinetix 2000 servo drive and a CompactLogix L43 controller.
TLY-A2540P-HK62AA
The TLY-A2540P-HK62AA permanent magnet motor was made by Allen-Bradley with 4 permanent magnet stacks and an incremental encoder that is rated at 2000 lines per revolution. This motor is a member of the TLY motor series and it is a low-inertia type of servo motor. The TLY-A2540P-HK62AA motor's operating ratings include 230V AC of voltage and 5000 RPM of rated shaft speed. Its housing is an IP65-rated housing.
