GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC610MDL175 |
Series: | Series One |
UPC: | 499399019579 |
Description:
The GE Fanuc Emerson IC610MDL175 is an output module that includes eight outputs that deliver a voltage of either 115 volts AC or 230 volts AC. The module outputs are grouped into two groups of four outputs. The IC610MDL175 weighs approximately 180 grams (0.39 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC610MDL175 is an output module that includes eight (8) output points that deliver a voltage rating range from 97 volts AC to 265 volts AC at a frequency range from 47 hertz to 63 hertz. The module outputs are grouped into two groups of four outputs that are labeled with green LED indicators to show the on/off status of outputs. Each group is protected by a 5 amperes fast blow fuse. The IC610MDL175 can be easily mounted in any input or output slot of the system. The output module provides an on response time of 1 millisecond and an off response time of 10 milliseconds. The device can be employed for incandescent and inductive loads such as indicator lights, relay coils, motor starters, and solenoid valves. The wiring connections of this module are connected to screw terminals on a faceplate terminal block by employing either two 14 AWG wires or a single 12 AWG wire.
The IC610MDL175 draws a current of 20 milliamperes at a voltage of 9 volts DC. The module outputs deliver a current of 1 ampere per point. The IC610MDL175 has an output voltage drop of 0.9 volts and a leakage current of 1200 microamperes at 220 volts AC and 500 microamperes at 110 volts AC. This device operates at a frequency range from 47 hertz to 63 hertz. This unit supports a non-condensing relative humidity range from 5 percent to 95 percent and a vibration frequency range from 10 hertz to 500 hertz. The IC610MDL175 weighs approximately 180 grams (0.39 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.
Brand | GE Automation Fanuc / Emerson Automation |
Series | Series One |
Part Number | IC610MDL175 |
Description | Output module |
Number of I/O points | 8 outputs |
Output groups | 2 with 4 circuits in each group |
Rated voltage | 115/230 VAC |
Output voltage range | 97 VAC to 265 VAC, 47 Hz to 63 Hz |
Fuses (Internal) | 2 x 5 amp fast blow (one on each group of 4) |
Output current | 1 ampere maximum per point |
Output voltage drop | 0.9 volts |
Output leakage current | 1.2 mA at 220 VAC, 0.5 mA at 110 VAC, 60 Hz |
On/Off response time | 1 ms / 8-10 ms |
Internal power consumption | 20 mA maximum at 9 VDC |
Weight | 180 g (0.39 lb) |
Question: Does Automation Stop offer repairs on the IC610MDL175?
Answer: Yes. We offer repairs for the IC610MDL175 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC610MDL175?
Answer: If you buy the IC610MDL175 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC610MDL175 online?
Answer: Yes. Automation Stop sells the IC610MDL175 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC610MDL175?
Answer: The IC610MDL175 is made by Emerson - GE Fanuc.
Question: What Brand does the Allen Bradley IC610MDL175 have?
Answer: The Allen Bradley IC610MDL175 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What Description is included with the IC610MDL175?
Answer: The Rockwell-Automation IC610MDL175 has a Output module Description.
Question: What is the Fuses (Internal) of the Allen Bradley/Rockwell Automation IC610MDL175?
Answer: The IC610MDL175 has a Fuses (Internal) of 2 x 5 amp fast blow (one on each group of 4).
Question: What is the Internal power consumption of the IC610MDL175?
Answer: The IC610MDL175 has a Internal power consumption of 20 mA maximum at 9 VDC.
Question: What is the Number of input/output points of the Rockwell-Automation IC610MDL175?
Answer: The Rockwell-Automation IC610MDL175 has a Number of input/output points of 8 outputs.
Question: What is the On/Off response time of the IC610MDL175?
Answer: The IC610MDL175 has a On/Off response time of 1 ms / 8-10 ms.
Question: What Output current does the IC610MDL175 have?
Answer: The IC610MDL175 has a Output current of 1 ampere maximum per point.
Question: What is the Output groups of the IC610MDL175?
Answer: The Output groups of the Allen Bradley Automation IC610MDL175 is 2 with 4 circuits in each group.
Question: What Output leakage current does the IC610MDL175 have?
Answer: The Output leakage current of the Rockwell Automation IC610MDL175 is 1.2 mA at 220 voltage alternating current (VAC), 0.5 mA at 110 voltage alternating current (VAC), 60 Hz.
Question: What is the Output voltage drop of the IC610MDL175?
Answer: The Output voltage drop of the Rockwell Automation IC610MDL175 is 0.9 volts.
Question: What is the Output voltage range of the Allen Bradley-Rockwell Automation IC610MDL175?
Answer: The IC610MDL175 has a Output voltage range of 97 voltage alternating current (VAC) to 265 voltage alternating current (VAC), 47 Hz to 63 Hz.
Question: What is the component Number of the Rockwell-Automation IC610MDL175?
Answer: The Rockwell-Automation IC610MDL175 has a unit Number of IC610MDL175.
Question: What is the Rated voltage of the IC610MDL175?
Answer: The Allen Bradley-Rockwell Automation IC610MDL175 has a Rated voltage of 115/230 VAC (voltage alternating current).
Question: What is the Weight of the Allen Bradley-Rockwell Automation IC610MDL175?
Answer: The Weight of the Allen Bradley-Rockwell Automation IC610MDL175 is 180 g (0.39 lb).
For additional information about IC610MDL175 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC610MDL175.
Revision Part # | Also Known As | Availability |
---|---|---|
IC610MDL175A | IC610MDL175 Series A, Rev A | Request a Quote |
IC610MDL175B | IC610MDL175 Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.