GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Allen Bradley - Drives

1336 PLUS II Drives

The 1336 PLUS II by Allen Bradley provides adjustable frequency AC drives that provide ratings from 0.37-448 kW (0.5-600 HP) in three different voltage ranges of 200-240V AC, 380-480V AC, and 500-600V AC. Throughout this family of drives, simplicity in the designing and programming is consistent with an easy-to-read display, easy programming parameters, simple tuning, serial communication, common assembly parts, and compact packaging. Some special functions that can be found in the 1336 PLUS II drives are Auto Economizer, process PI controller, traverse function, selectable fault reset & run, auto restart on power up, speed sensitive electronic overload, auto-tuning, and step logic. The drive operations include Sensor-less vector control, selectable volts/hertz mode, and multi-lingual selection. The sensorless vector control system gives the drives a background of powerful algorithms, handling tough applications that other drives can’t. Both sensorless vector control and V/Hz mode provide outstanding 3-phase motor control. The multi-lingual option makes it easy to program the drives. These drives are very secure and protective as they process any fault or error status in real-time and report the findings. This is a continuous cycle; throughout the sequence, the drive will keep searching for potential faulty conditions. They also comply with NEMA and European standards and can be used worldwide. With a digital programmable feature within the drives, they can be programmed to perform tasks precisely and accurately. This feature gives a much higher control and flexibility to issue control through the Human Interface Module or serial communications port. A configurable I/O allows simple connections to be programmed and used in control applications as required.

1336 PLUS II Adjustable Frequency AC Drive Selection Guide

Adjustable frequency AC drives are widespread in many industries, including manufacturing, material handling, and process control. These drives use electronic controls to alter the frequency of the electrical power supplied to the motor, which in turn changes the speed of the motor. This allows for precise control over the motor's speed and efficient operation of the equipment it powers. Adjustable Frequency AC drives offer many benefits over traditional mechanical methods of speed control, including improved energy efficiency, better speed regulation, and increased reliability.

To ensure the optimal control of a motor, Allen Bradley 1336 Plus II Series Drives offer a diverse and finely tuned line of AC drives with Sensorless Vector Control/Volts per Hertz control. These products were created to provide speed control solutions for many applications and include the tuning capabilities necessary for unique needs. However, do not worry - this detailed guide has got covered!

This will address all aspects of these great devices in detail so one can pick the right one to suit the specific needs.

Overview of 1336 PLUS II Drives

The 1336 PLUS II drive series by Allen-Bradley is an accessible and efficient line of AC drives. With a suite of available adjustments, sensors, interfaces, and customization options that are universal throughout the product line - these models ensure easy integration, installation, operation, training, and upkeep for all environments or situations.

The 1336 PLUS II motors range includes voltages spanning from 200VAC to 240VAC, 380VAC to 480VAC, and 500VAC to 600 VAC. 9 different frame sizes (A1, A2, A3, A4, B1, B2, C, D, and E) permit this product to be used in stationary or mobile applications. This series of PLUS II motors has been programmed with an adjustable PWM frequency with an adjustable voltage output for adjustments depending on load requirements, therefore providing the industry with the desired performance necessary at all times.

To make things easier, this guide will divide the 1336 Plus II into three classes based on voltage, i.e., 220-240V, 380-480V, and 500-600V. It is important to note that all products under any class are equipped with a particular "enclosure type". (This is different from the frame sizes discussed above. Frame sizes give the dimensions of the enclosure, while enclosure type provides the type/quality/presence of the enclosure.)

These drives come with the following enclosures. Depending on the two-digit alphabetic code at position 4 of the product catalog number, you can know about the drive’s enclosure.

  • Code: AA
    • Type: IP 20 (NEMA 1)
    • Description: An enclosure with a type IP20 (NEMA 1) rating is designed for indoor use. It protects against accidental contact with live parts inside the enclosure, but it is not sealed against the ingress of solid objects, dust, or water.
  • Code: AE
    • Type: IP 20 (NEMA 1) / EMC
    • Description: An enclosure with a type IP20 (NEMA 1)/EMC rating is an indoor electrical enclosure that provides a degree of protection against accidental contact with live parts inside the enclosure, and it has been designed to minimize the emission of EMI and to provide some level of immunity to EMI from external sources.
  • Code: AF
    • Type: IP 65 (NEMA 4)
    • Description: An enclosure with a type IP65 (NEMA 4) rating is designed for outdoor use and provides a high level of protection against dust and water ingress. It is suitable for use in environments where the enclosure may be exposed to low-pressure water jets from all directions.
  • Code: AJ
    • Type: IP 54 (NEMA 12)
    • Description: An enclosure with a type IP54 (NEMA 12) rating is designed for indoor and industrial use and provides a moderate level of protection against dust and water ingress.
  • Code: AN
    • Type: IP 00 (Open)
    • Description: An enclosure with an IP00 rating is considered an "open" enclosure, as it does not protect against the ingress of any external objects or substances.

It is also significant to know that every adjustable frequency AC drive from Allen Bradley comes with a specific language module. The language module of any drive can be determined from a 2-digit code at position 5 of the product catalog number.

  • Language Code: EN
    • Language: English
    • Applicability: All drives
  • Language Code: FR
    • Language: French
    • Applicability: All drives
  • Language Code: DE
    • Language: German
    • Applicability: All drives
  • Language Code: IT
    • Language: Italian
    • Applicability: All drives
  • Language Code: JP
    • Language: Japanese
    • Applicability: All drives
  • Language Code: ES
    • Language: Spanish
    • Applicability: All drives

These drives are categorized into the following categories based on their voltages. The voltage class of each drive is classified at position 2 as a 2-digit alphabetic code of the product catalog number.

220V-240V AC & 310V DC Drives (code: AQ, A, Q)

These drives are available in a wide range of ampere ratings, from 2.3A to 325A, and KW ratings, from 0.37KW to 93KW, to suit the needs of different motor sizes and applications.

This 1336 Plus II series is compatible with all enclosure types, making it suitable for various environments and applications. The "AQ" models of the 1336 Plus II series offer support for both 310V DC and 220-240V AC, while the "A" models are only designed for use with 220-240V AC, and “Q” models are just compatible with 310V DC. These drives are user-friendly and feature built-in protection against electrical noise to ensure smooth and reliable operation. To have a more comprehensible view, the product range is as follows:

  • AQF05-AN/AA/AF/AJ – AQF75-AN/AA/AF/AJ
    • Voltage Class: 220V-240V AC or 310V DC
    • Ampere Rating Range: 2.3A - 22A
    • Kilowatt Rating Range: 0.37kW - 5.5kW
    • Horsepower Rating Range: 0.5Hp - 7.5Hp
  • A007-AN/AA/AF/AJ – A125-AN/AA/AF/AJ
    • Voltage Class: 220V-240V AC
    • Ampere Rating Range: 22A - 325A
    • Kilowatt Rating Range: 5.5kW - 93kW
    • Horsepower Rating Range: 7.5Hp - 125 Hp

380V-480V AC & 513V-620V DC Drives

This voltage class of 1336 Plus II drives is suitable for use with input voltages between 380V and 480V AC or 513V to 620V DC. The drives in this voltage class are available in both constant and variable torque models, with ampere ratings ranging from 1.1A to 670A and KW ratings ranging from 0.37KW to 448KW.

These drives are compatible with all enclosure types and suitable for use in various environments and applications. The "BR" models of the 1336 Plus II series offer support for 513V-620V DC, while the "B" models are designed for use with 380-480V AC. The "BP/BPR" models are specially enclosed in "F" frames, and the "BX" models have a special rating.

The voltage class of 380V-480V is used in various industrial and commercial applications, including manufacturing, material handling, and pump and fan control. These drives also control the speed and torque of various AC motor types, including induction motors, synchronous motors, and servo motors.

The product range of this class can be described as follows:

  • BRF05-AN/AA/AE/AF/AJ – BRF200-AN/AA/AE/AF/AJ
    • Voltage Class: 380V-480V AC or 513-620V DC
    • Ampere Rating Range: 1.1A or 1.2A (constant/variable torque) – 27A
    • Kilowatt Rating Range: 0.37kW – 15kW
    • Horsepower Rating Range: 0.5Hp – 20Hp
  • B015-AN/AA/AE/AF/AJ – B600-AN/AA/AE/AF/AJ
    • Voltage Class: 380V-480V AC
    • Ampere Rating Range: 24.2A or 27A (constant/variable torque) – 670A
    • Kilowatt Rating Range: 11kW or 15kW (constant/variable torque) – 448kW
    • Horsepower Rating Range: 15Hp or 20 Hp (constant/variable torque) – 600Hp
  • BP250-AN/AA/AE – BPR450-AN/AA/AE
    • Voltage Class: 380V-480V AC
    • Ampere Rating Range: 325A or 360A (constant/variable torque) – 532A
    • Kilowatt Rating Range: 187kW or 336kW  (constant/variable torque) – 448kW
    • Horsepower Rating Range: 250Hp or 300 Hp (constant/variable torque) – 450Hp

500V-600V AC & 775V DC Drives

The 500-600V Allen Bradley 1336 Plus II AC drives are dependable and high-performing drive series for accelerating electric motors in different commercial applications. This voltage rating of the 1336 Plus II makes it possible for this product to be used with input voltages between 500V and 600V AC, which suits a wide range of application needs. With amperage ratings starting at 2.0A up to 600A, these products can work well with just about any size motor while still being practical enough to withstand all load conditions - even when operated on frequencies as low as 30Hz!

These drives are compatible with all enclosure types and suitable for use in various environments and applications. The "CW" models of the 1336 Plus II series offer support for 775V DC, while the "C" models are designed for use with 500-600V AC. The "CP/CPR" models are specially enclosed in "F" frames. The detailed product range of this voltage class is given below:

  • CWF10-AN/AF/AA/AJ – CWF200-AN/AF/AA/AJ
    • Voltage Class: 500-600V AC or 775V DC
    • Ampere Rating Range: 2.0A – 24A
    • Kilowatt Rating Range: 0.75kW – 15kW
    • Horsepower Rating Range: 1Hp – 20Hp
  • C025-AN/AF/AA/AJ – C600AAN/AF/AA/AJ
    • Voltage Class: 500-600V AC
    • Ampere Rating Range: 30A – 600A
    • Kilowatt Rating Range: 18.5kW – 448kW
    • Horsepower Rating Range: 25Hp – 600Hp
  • CP350/CPR350-AN/AA – CP450/CPR400-AN/AA
    • Voltage Class: 500-600V AC
    • Ampere Rating Range: 350A – 400A
    • Kilowatt Rating Range: 261kW – 298kW
    • Horsepower Rating Range: 350Hp – 400Hp

Features of 1336 PLUS II Drives

llen Bradley 1336 Plus II drives are highly versatile and reliable adjustable frequency drives that offer a wide voltage range and multiple control modes, making them suitable for various industrial applications. They also have a user-friendly interface and built-in setup wizard that makes it easy to configure for specific needs. In addition, the 1336 Plus II drives have robust design features that make them suitable for use in harsh industrial environments, including a NEMA Type 1 enclosure and surge and EMI filters. Its built-in communication capabilities allow for remote monitoring and control, making it an ideal choice for a wide range of corporate applications.

Some highlighter features are given:

Communication Options:

There are several communication options available for the 1336 Plus drive, which can be used to monitor and control the drive remotely. These options include:

  • Single Point Remote I/O B Frame: This communication option allows the driver to communicate with other devices using a single point remote I/O link. It can exchange data with other devices, such as PLCs, HMIs, and PCs.
  • RS-232/422/485: This serial communication protocol allows the drive to communicate with other devices using a standard serial interface. It can exchange data with other devices, such as PLCs, HMIs, and PCs.
  • DF1 & DH485 B Frame: These communication protocols connect devices in an industrial control system. They allow devices to communicate with each other using a common data link and protocol.
  • DeviceNet: This field bus system is used to connect devices in an industrial control system. It allows devices to communicate with each other using a common data link and protocol.
  • Enhanced DeviceNet: This is an enhanced version of the DeviceNet field bus system that provides additional features and capabilities. It allows devices to communicate with each other using a common data link and protocol.

In general, these communication options are used to monitor and control the drive remotely and to exchange data with other devices in the control system. They can be used to set parameters, monitor drive performance, and troubleshoot issues.

Communication Options - B Frame & Up (Adapter 6)
  • Option Code: GM1
    • Description: Single Point Remote I/O B Frame
  • Option Code: GM2
    • Description: RS-232/422/485, DF1 & DH485 B Frame
  • Option Code: GM5
    • Description: DeviceNet
  • Option Code: GM6
    • Description: Enhanced DeviceNet
Communication Options - All Frames (Adapter 1)
  • Option Code: GMS1
    • Description: GM1 with Snap-In Cradle
  • Option Code: GMS2
    • Description: GM2 with Snap-In Cradle
  • Option Code: GMS5
    • Description: GM5 with Snap-In Cradle
  • Option Code: GMS6
    • Description: GM6 with Snap-In Cradle

Control Interface Options:

The 1336 Plus II drive offers several control interface options that can be used to connect the drive to external control devices, such as PLCs, HMIs, and sensors. These options include:

  • TTL Contact: This control interface option allows the drive to be controlled using a digital input signal. The drive can be connected to a device, such as a PLC or HMI, using a digital input signal, which can be used to start, stop, or control the speed of the drive.
  • TTL Contact & Encoder Feedback: This is a control interface option that allows the drive to be controlled using a digital input signal and receive feedback from an encoder. The encoder can be used to provide feedback on the speed and position of the motor, which can be used to control the drive or monitor its performance.
  • 24V/115V AC/DC & Encoder Feedback: This control interface option allows the device to be controlled using a 24V or 115V AC/DC input signal and receives feedback from an encoder. The encoder can provide feedback on the speed and position of the motor, which can be used to control the device or monitor its performance. Some control interfaces work fine without encoder feedback too.

These control interface options are generally used to connect the drive to external control devices and exchange data with these devices. They can be used to set parameters, monitor drive performance, and troubleshoot issues.

Control Interface Options - All Drives
  • Option Code: L4
    • Descriptions: TTL Contact
  • Option Code: L4E
    • Descriptions: TTL Contact & Encoder Feedback
  • Option Code: L7E
    • Descriptions: TTL Contact & Encoder Feedback for use with Encoder Loss Detection
  • Option Code: L5 2
    • Descriptions: 24V AC/DC
  • Option Code: L5E 2
    • Descriptions: 24V AC/DC & Encoder Feedback
  • Option Code: L8E
    • Descriptions: 24V AC/DC & Encoder Feedback for use with Encoder Loss Detection
  • Option Code: L6
    • Descriptions: 115V AC
  • Option Code: L6E
    • Descriptions: 115V AC & Encoder Feedback
  • Option Code: L9E
    • Descriptions: 115V AC & Encoder Feedback for use with Encoder Loss Detection

Protective Features:

To protect the drive and the motor it controls, the 1336 Plus II drives include several protective features. These features include:

  • Undervoltage: This protective feature monitors the voltage supplied to the drive and shuts it down if it falls below a certain level. This can help to prevent damage to the drive or the motor if the voltage supply is unstable.
  • Overvoltage: This protective feature monitors the voltage supplied to the drive and shuts it down if it exceeds a certain level. This can help to prevent damage to the drive or the motor if the voltage supply is too high.
  • Drive Overcurrent: This protective feature monitors the current flowing through the drive and shuts it down if it exceeds a certain level. This can help to prevent damage to the drive or the motor if the current flow is too high.
  • Overtemperature: This protective feature monitors the drive's temperature and shuts it down if it exceeds a certain level. This can help to prevent damage to the drive or the motor if the temperature becomes too high.
  • External Signal: This protective feature allows the drive to be shut down using an external signal, such as a command from a PLC or HMI. This can be used to shut down the drive during emergencies or maintenance.
  • Drive Output Short: This protective feature monitors the drive's output and shuts it down if a short circuit is detected. This can help to prevent damage to the drive or the motor if the output is shorted.
  • Ground Fault: This protective feature monitors the ground connection of the drive and shuts it down if a fault is detected. This can help to prevent damage to the drive or the motor if the ground connection is faulty.
  • Encoder Loss: This protective feature monitors the encoder input of the drive and shuts it down if the encoder signal is lost. This can help to prevent damage to the drive or the motor if the encoder fails or is disconnected.
  • Overcurrent Stall: This protective feature shuts down the drive if the current flowing through the motor exceeds a certain level for an extended period. This can help to prevent damage to the drive or the motor if the current flow is too high.
  • Overvoltage Stall: This protective feature shuts down the drive if the voltage supplied to the motor exceeds a certain level for an extended period. This can help to prevent damage to the drive or the motor if the voltage supply is too high.
  • Six Drive Alarms: The 1336 Plus II drive includes six drive alarms that can alert the operator of issues with the drive or the motor. These alarms can be programmed to trigger based on specific conditions, such as a high temperature or an overcurrent condition.
  • Fault Reset Input: This protective feature allows the operator to reset the drive after a fault has been detected. This can be done using an external signal, such as a command from a PLC or HMI.

In general, these protective features are designed to help prevent damage to the drive and the motor it controls and to alert the operator if there is an issue with the drive or the motor. They can be used to ensure the drive's reliability and safety in various industrial applications.

Special Functions:

1336 Plus II Drives include several special functions that can be used to enhance its performance and capabilities. These particular functions include:

  • Auto Economizer: This function allows the drive to operate in an energy-efficient mode, where it adjusts the speed of the motor to match the load demand. This can reduce energy consumption and improve the efficiency of the drive.
  • Process PI Controller: This function allows the drive to control the speed of the motor using a proportional-integral (PI) controller. The PI controller adjusts the speed of the motor based on the difference between the setpoint and the motor's actual speed.
  • Traverse Function: This particular function allows the drive to control the speed of the motor in a precise, step-by-step manner. It can be used to control the speed of the motor in applications where precise control is required, such as in positioning or handling systems.
  • Selectable Fault Reset & Run: This allows the operator to select whether the drive will reset or run after a fault has been detected. This can be useful in applications where it is crucial to keep the drive running, even if a fault has been detected.
  • Auto Restart on Power Up: This function allows the drive to restart automatically after a power failure or interruption. This can be useful in applications where it is crucial to keep the drive running, even if there is a power interruption.
  • Speed Sensitive Electronic Overload: This function allows the drive to monitor the current flowing through the motor and adjust the speed of the motor to prevent an overload condition. This can help to protect the drive and the motor from damage due to high current levels.
  • Auto-tuning: This function allows the drive to automatically adjust its control parameters to optimize the performance of the motor. It can be used to improve the drive's accuracy and stability and reduce the time required to set up the drive.
  • Step Logic: This special function allows the drive to be programmed to perform specific actions based on a set of conditions or events. It can be used to control the speed of the motor in a precise, step-by-step manner and to perform specific tasks based on specific conditions.

In general, these special functions can be used to enhance the performance and capabilities of the 1336 Plus drive and tailor it to the application's specific needs. They can be used to improve the drive's accuracy, stability, and efficiency and add additional functionality and control to the drive.

Conclusion

In conclusion, the Allen-Bradley 1336 Plus II drives are a reliable and versatile choice for controlling the speed and torque of three-phase AC motors. When selecting a 1336 Plus II drive, it is essential to consider the application's specific needs, as well as the available communication options, control interface options, and special functions. By considering these factors, it is possible to select a 1336 Plus II drive that is well-suited for the application, and that can provide the performance and functionality required.

Browse our selection of 1336 PLUS II Drives units

AutomationStop.com's online catalog offers one of the largest selections of preowned 1336 PLUS II Drives units in the world.

1336F-BX060-AN-EN-L6

Part number 1336F-BX060-AN-EN-L6, which was manufactured by Allen Bradley, is an adjustable frequency AC drive. It belongs to the 1336 PLUS II line of products. This drive has an output power rating of 45 kilowatts or 60 horsepower. The 1336F-BX060-AN-EN-L6 is equipped with a 115-volt AC control interface.

1336F-BX060-AX-EN

The 1336F-BX060-AX-EN drive is an adjustable frequency drive with a special input voltage rating that was manufactured by Allen-Bradley in the 1336 PLUS II line. This drive can produce 60 Horsepower and 45 kilowatts of nominal output. The 1336F-BX060-AX-EN drive and its motor can operate quietly because the drive has IGBTs. This drive was designed to operate as reliably as possible because it uses a minimal number of internal wires and its logic and power components are isolated.

1336F-BX060-AX-EN-L6

Product number 1336F-BX060-AX-EN-L6 is an Allen Bradley adjustable frequency AC drive. This device is part of the 1336 PLUS II series of products. The control interface of this drive has a 115-volt AC voltage rating. The 1336F-BX060-AX-EN-L6 outputs 45 kilowatts or 60 horsepower of power.

1336F-C025-AN-EN

The Allen-Bradley 1336 PLUS II 1336F-C025-AN-EN drive comes with the torque technology that is required for controlling low-inductance motors and motors that are larger than average. It operates at 500 to 600 Volts AC, and it trips at 690 Volts AC for overvoltage protection and at 343 Volts AC for undervoltage protection. The 1336F-C025-AN-EN drive generates 25 Horsepower or 18.5 kilowatts of nominal output power.

1336F-C040-AN-EN

This Adjustable Frequency drive from the Allen Bradley 1336F PLUS II series, Catalog ID 1336F-C040-AN-EN, is rated for 500-600 Volts AC three-phase power with 30 kW output. The drive is considered an open-frame drive with an IP-00 rating standard. The 1336F-C040-AN-open EN's enclosure should be installed vertically and has an IP 00 protection certification. 4 inches should be left on the horizontal axis, and 6 inches should be left on the vertical axis between neighboring drives, according to Allen-minimum Bradley's spacing standards. These suggestions are made to guarantee that there is enough room around the drive for heat dissipation.

1336F-C060-AN-EN

This Allen-Bradley drive, Model ID 1336F-C060-AN-EN, is a three-phase 500-600 Volts AC drive with a 45-kW unit output. This drive comes in English and is listed as Frame-C in size. The drive is not protected from environmental factors as it is an open IP00-rated drive. The drive's output parameters call for 62 Amperes of current and 60 Horsepower (45 kilowatts) of power. The 1336F-C060-AN-EN drive's enclosure is open and has an IP 00 protection level rating. The drive measures 701 x 301 x 225 millimeters and weighs 38.6 kg when shipped.

1336F-C100-AN-EN

Part Number 1336F-C100-AN-EN is a Variable Speed Drive (VSD) by Allen Bradley/ Rockwell Automation. This device operates with a 3-phase AC power supply. And it has 75 kilowatts (100 horsepower) normal-duty (ND) output power rating. This device requires 500 to 600 Volts of AC to operate, and it is a high-voltage drive. It can be programmed in English, and it has an IP00-rated enclosure. Hence, users should keep it from harmful solids and liquids.

1336F-CWF100-AA-EN-HCS2-L5

The 1336F-CWF100-AA-EN-HCS2-L5 is a 1336 Plus II series drive from Allen-Bradley. It has a 3-phase input voltage rating of 600V AC and a power output of 5 Horsepower. The drive controls the speed and torque of the electric motors with its control algorithms and has a human-machine interface module with a programmer and digital pot. The drive has a NEMA Type 1 IP20-rated enclosure. The drive supports high-speed input and is flexible regarding analog input and output.

1336F-CWF100-AN-EN

This industrial module by the Allen Bradley 1336 PLUS I series, Model ID 1336F-CWF100-AN-EN, is an open frame (IP-00 rated) drive set up to communicate in English. This drive has a 500-600 Volts AC or 775 Volts DC power input and produces 7.5 kilowatts or ten horsepower. The DriveExplorer can be utilized over a communication network, whereas the HIM can only be configured and controlled locally. For usage with Programmable Logic Controllers (PLC) for dynamic setting of the adjustable frequency AC drive, the SCANport connection is specifically created.

1336F-CWF100-AN-EN-L5

The Allen-Bradley 1336F-CWF100-AN-EN-L5 1336 PLUS II variable frequency drive is an AC/DC-powered drive with an optional AC/DC-powered control interface. The 1336F-CWF100-AN-EN-L5 drive is powered by 500-600V AC or by 775V DC and its optional control interface is powered by 24V AC or by 24V DC. Its output power rating is 10 Horsepower (7.5 kilowatts). The 1336F-CWF100-AN-EN-L5 drive has technology that can detect several common types of system errors and that can trip the drive to protect it from these errors.

1336F-CWF10-AA-EN

The Allen-Bradley 1336F-CWF10-AA-EN drive is one of the 1336 PLUS II series drives that can operate with either AC or DC voltage. Its AC voltage rating is 500 to 600 Volts AC while its DC voltage rating is 775 Volts DC. The 1336F-CWF10-AA-EN drive only supports 1 Hp of nominal Hp output. This drive can support DC injection braking and dynamic braking, and it also support a flying start option and up to 7 preset speeds.

1336F-CWF10-AA-EN-HASP-L4

The 1336F-CWF10-AA-EN-HASP-L4 drive is an Allen-Bradley 1336 PLUS II drive which can operate with either AC or DC voltage and which has a low nominal Horsepower rating. This drive can operate with 500-600V AC voltage or with 775V DC voltage, and it has a nominal Horsepower rating of 1 Horsepower or 0.75 kilowatts. The 1336F-CWF10-AA-EN-HASP-L4 drive is easy to program with its HMI, but this HMI has no potentiometer or control features.

1336F-CWF10-AA-EN-HCS1-L6

The Allen-Bradley 1336F-CWF10-AA-EN-HCS1-L6 adjustable frequency drive is an AC/DC-powered 1336 PLUS II series adjustable frequency drive. It can be powered by 500-600V AC and by 775V DC and it can support 1 Horsepower or 0.75 kilowatts of output power at these voltage ratings. The 1336F-CWF10-AA-EN-HCS1-L6 drive has a snap-in programmer/controller HMI equipped with an analog potentiometer and an upload/download function. This drive also has a control interface connected to its TB3 terminal block.

1336F-CWF10-AA-EN-HCS2-L6

The 1336F-CWF10-AA-EN-HCS2-L6 drive is a motor control drive from the Allen-Bradley 1336 PLUS II line. It is typically used to control induction motors, and it can be programmed to save and quickly activate dual independent motor acceleration and deceleration times and as many as 7 operating speeds. The 1336F-CWF10-AA-EN-HCS2-L6 drive also has SVC (sensorless vector control) technology. It can operate at 500-600V AC or 775V DC and produce 1 Horsepower of output.

1336F-CWF10-AA-EN-HCS2-LA4-L6

The Allen-Bradley 1336 PLUS II 1336F-CWF10-AA-EN-HCS2-LA4-L6 drive is a VFD or variable frequency drive which was designed to be compact, flexible, and powerful. It is microprocessor-based, it supports V/Hz and SVC motor control technology, its output frequency is adjustable, and it comes with 3 interface modules. The 1336F-CWF10-AA-EN-HCS2-LA4-L6 drive's 3 interface modules are a 9-input control interface, a 1-input and 1-output analog interface, and a programmer/controller human-machine interface that has a special upload/download feature.

1336F-CWF10-AN-EN

The Allen-Bradley 1336 PLUS II 1336F-CWF10-AN-EN drive is a basic-model motor control drive with adjustable frequency but no interface modules. Additionally, its only enclosure option is an open enclosure with an IP00 ingress protection rating. The 1336F-CWF10-AN-EN drive is compatible with interface modules that are available through the 1336 PLUS II series. Depending on the application, the 1336F-CWF10-AN-EN drive can operate at 500-600V AC or 775V DC of voltage. The highest nominal Hp rating of the drive is 1 Hp.

1336F-CWF150-AA-EN-HAS2-LA3-L6

The 1336F-CWF150-AA-EN-HAS2-LA3-L6 drive is an Allen-Bradley 1336 PLUS II drive with an AC input voltage option, a DC input voltage option, an HMI, an analog I/O interface, and a control interface. Its AC input voltage option is 500 to 600 Volts AC and its DC input voltage option is 775 Volts DC. The 1336F-CWF150-AA-EN-HAS2-LA3-L6 drive's HMI is a snap-in programmer/controller HMI, its analog interface is an analog output interface, and its control interface is 115 Volts AC interface.

1336F-CWF150-AN-EN

Product number 1336F-CWF150-AN-EN is a 1336 PLUS II-series Adjustable Frequency AC Drive. It was produced by Allen-Bradley/Rockwell Automation. This AC drive has an input voltage rating that ranges from 500 - 600 volts AC or 775 volts DC. In addition, the 1336F-CWF150-AN-EN has a rated power output of 11 kilowatts or 15 horsepower. It includes an open-type enclosure with an IP 00 rating.

1336F-CWF150-AN-EN-HASP-L4

The Allen-Bradley 1336 PLUS II 1336F-CWF150-AN-EN-HASP-L4 drive is capable of controlling large motors with its sensorless vector technology and it is capable of operating on 500-600V AC or on 775V DC. It has an HMI that is capable of completely programming it, but this HMI has no control functions. The 1336F-CWF150-AN-EN-HASP-L4 drive also has a 5V DC-rated control interface connected to one of its terminal blocks. Its Horsepower rating is 15 Hp (nominal).

1336F-CWF150-AX-EN-L6

The Allen-Bradley 1336F-CWF150-AX-EN-L6 motor-controlling drive is an AC and DC-powered type of motor-controlling drive in the 1336 PLUS II drive series. It can operate when it is powered by 500-600V AC and when it is powered by 775V DC. The nominal output power rating of the 1336F-CWF150-AX-EN-L6 drive is 11 kilowatts or 15 Horsepower. There is a control interface connected to one of the 1336F-CWF150-AX-EN-L6 drive's terminal blocks and there are 9 inputs on this interface.

1336F-CWF200-AN-EN

The Allen-Bradley 1336F-CWF200-AN-EN drive is a 1336 PLUS II series AC and DC-powered drive with adjustable output frequency and sensorless vector motor control technology. This drive can be powered by 500 to 600 Volts AC or by 775 Volts DC. The 1336F-CWF200-AN-EN drive's output frequency range is between 0 Hertz and 400 Hertz. This drive produces 20 Horsepower or 15 kilowatts of nominal output power during operation. It has maintenance technology that operates in real-time.

1336F-CWF20-AA-EN

Catalog number 1336F-CWF20-AA-EN, which was manufactured by Allen Bradley, is a 1336 PLUS II-series AC drive. This device requires an input voltage ranging from 500 volts AC to 600 volts AC or 775 volts DC to operate properly. This AC drive typically outputs 1.5 kilowatts (2 horsepower) of power. The enclosure of the 1336F-CWF20-AA-EN is classified as a NEMA Type 1 enclosure with an IP 20 protection rating.

1336F-CWF20-AA-EN-HAS2-L5

The Allen-Bradley 1336 PLUS II 1336F-CWF20-AA-EN-HAS2-L5 drive is equipped with a snap-in human-machine interface and an AC/DC-powered control interface. The drive itself is AC/DC-powered as well. The 1336F-CWF20-AA-EN-HAS2-L5 drive operates with 500-600V AC/775V DC and its control interface operates with 24V AC/DC. This drive's human-machine interface has a digital type of speed potentiometer, but it cannot be used to upload or download data. The 1336F-CWF20-AA-EN-HAS2-L5 drive is rated for 2 Hp or 1.5 kW of nominal output power.

1336F-CWF20-AA-EN-L4

The Allen-Bradley 1336 PLUS II 1336F-CWF20-AA-EN-L4 drive is an AC drive that can also operate with DC voltage. Its AC voltage rating is 500-600 Volts AC, and its supported DC voltage rating is 775 Volts DC. The 1336F-CWF20-AA-EN-L4 drive's only interface module is a control interface that is rated at 5 Volts DC and that is a TTL contact type of control interface. The 1336F-CWF20-AA-EN-L4 drive's nominal Hp rating is 2 Hp.

1336F-CWF20-AA-EN-L6

The Allen-Bradley 1336F-CWF20-AA-EN-L6 variable frequency drive is a 1336 PLUS II drive with a control interface and the ability to operate with AC or DC input. The control interface for the drive operates with 115V AC voltage and its 9 inputs are all programmable. The 1336F-CWF20-AA-EN-L6 drive can operate with 500-600V AC input or with 775V DC input. This drive has several programmable features, including dynamic braking, slip compensation, 7 preset speeds, and a line loss restart option.

1336F-CWF20-AN-EN

The Allen-Bradley 1336 PLUS II 1336F-CWF20-AN-EN drive is a basic adjustable frequency drive with an open enclosure and no interface modules. However, it is equipped with several selectable and programmable control technology options that allow it to control significantly different types of motors in a variety of significantly different applications and systems. The 1336F-CWF20-AN-EN drive is able to operate at 500-600V AC or at 775V DC. The 1336F-CWF20-AN-EN drive is microprocessor-based.

1336F-CWF20-AN-EN-HASP-L4

The Allen-Bradley 1336F-CWF20-AN-EN-HASP-L4 1336 PLUS II drive comes with a programmer-only HMI and a TTL contact control interface module. It can only support a nominal Horsepower output rating of 2 Horsepower, but it can support 775 Volts DC voltage as well as 500 to 600 Volts AC voltage. The 1336F-CWF20-AN-EN-HASP-L4 drive was designed with an open enclosure that dissipates heat efficiently but which cannot protect the drive from solid debris or from liquids.

1336F-CWF20-AN-EN-HCS2

The Allen-Bradley 1336 PLUS II 1336F-CWF20-AN-EN-HCS2 drive comes with an advanced snap-in HMI. This HMI or human-machine interface can be used to completely program the drive, and it can be used control the drive after the drive is programmed. The 1336F-CWF20-AN-EN-HCS2 drive's HMI also has an upload and download option and a digital potentiometer. This drive can operate at either 500 to 600 Volts AC or at 775 Volts DC.

1336F-CWF20-AN-EN-MX3

The Allen-Bradley 1336 PLUS II 1336F-CWF20-AN-EN-MX3 drive is microprocessor-based, conformally coated, and AC and DC-powered. Its microprocessor is powerful and efficient, and its conformal coat makes it resistant to damage from chemicals, high temperatures, debris, water, and other liquids. The 1336F-CWF20-AN-EN-MX3 drive can be powered by 500-600V AC or by 775V DC. Additionally, the nominal output power rating of the 1336F-CWF20-AN-EN-MX3 drive is 1.5 kilowatts or 2 Horsepower.

1336F-CWF30-AA-EN

The Allen-Bradley 1336F-CWF30-AA-EN drive is a 1336 PLUS II microprocessor-based drive that can control induction motors in various applications. The drive is compact but it is able to produce high torque with its SVC or sensorless vector technology. The 1336F-CWF30-AA-EN drive also has a V/Hz or Volts per Hertz control technology option that can handle most standard control applications with induction motors. Its voltage rating options are 500-600 Volts AC and 775 Volts DC.

1336F-CWF30-AA-EN-HAS2

The Allen-Bradley 1336 PLUS II 1336F-CWF30-AA-EN-HAS2 adjustable frequency drive can operate at 500-600V AC or 775V DC of input voltage, 0-400 Hz of output frequency, and 3 Horsepower or 2.2 kilowatts of nominal output power. It comes with a programmer and controller type of HMI that includes a digital speed potentiometer. The 1336F-CWF30-AA-EN-HAS2 drive's NEMA enclosure is IP20-rated. This drive has several features that protect it from common types of system errors.

1336F-CWF30-AN-EN

The Allen-Bradley 1336F-CWF30-AN-EN 1336 PLUS II drive can start a motor with a flying start, decelerate a motor with dynamic braking and DC injection braking, and operate that motor at 1 out of up to 7 preset speeds. It can operate at 500-600V AC, or it can operate at 775V DC. The 1336F-CWF30-AN-EN drive can host an HMI, a control interface, and up to 2 analog interfaces, but it does not come with any of these interfaces.

1336F-CWF50-AA-EN

The Allen-Bradley 1336 PLUS II 1336F-CWF50-AA-EN drive is designed to operate at 775 Volts DC or at 500 to 600 Volts AC in different applications. The nominal Horsepower rating of the 1336F-CWF50-AA-EN drive is 5 Horsepower or 3.7 kilowatts. The 1336F-CWF50-AA-EN drive has a laminar bus design and a planer construction which make it more reliable and efficient and easier to use than many other types of drives. It has several sensors that support dynamic current control.

1336F-CWF50-AA-EN-HAS2

The Allen-Bradley 1336F-CWF50-AA-EN-HAS2 1336 PLUS II drive is rated for 775V DC or 500-600V AC of input voltage. It is also rated for 5 Horsepower or 3.7 kilowatts of output power. The 1336F-CWF50-AA-EN-HAS2 drive features an HMI that has a digital potentiometer and the ability to program and to control the drive. It can support onboard communications and it is compatible with all of the devices from the Allen-Bradley SLC and PLC product lines.

1336F-CWF50-AA-EN-HCS2-L6

The Allen-Bradley 1336F-CWF50-AA-EN-HCS2-L6 drive is a 500 to 600 Volts AC and 775 Volts DC-rated motor control drive from the 1336 PLUS II product line. It features an HMI that can operate as a programmer/controller device and as a means for uploading and downloading data for applications. The 1336F-CWF50-AA-EN-HCS2-L6 drive also has a control interface with 9 programmable input channels. The nominal Horsepower rating for the 1336F-CWF50-AA-EN-HCS2-L6 drive is 5 Horsepower.

1336F-CWF50-AN-EN

The Allen-Bradley 1336F-CWF50-AN-EN drive is a basic and standard type of adjustable frequency drive in the 1336 PLUS II product line. Its functionality can be expanded with different interfaces and communication devices, but it does not come with any interfaces or communication devices. The 1336F-CWF50-AN-EN drive's only enclosure option is an open enclosure which dissipates heat but which does not protect the drive from liquids, debris, or chemicals. The voltage ratings of the drive are 775 Volts DC or 500 to 600 Volts AC and the output ratings of the drive are 5 Hp or 3.7 kW.

1336F-CWF75-AA-EN

The 1336F-CWF75-AA-EN motor control drive is a high-powered Allen-Bradley 1336 PLUS II motor control drive that operates with high levels of AC or DC voltage. It is made to operate with 500-600V AC or with 775V DC, depending on the application. The 1336F-CWF75-AA-EN drive was also made to operate with Volts/Hertz technology in most types of standard motor control applications or to operate with sensorless vector technology in many advanced or high-torque motor control applications.

1336F-CWF75-AA-EN-HCS2-L6

The Allen-Bradley 1336F-CWF75-AA-EN-HCS2-L6 drive is an AC/DC-powered adjustable frequency drive from the 1336 PLUS II line. Its AC rating is 500-600V AC, and its DC rating is 775V DC. The 1336F-CWF75-AA-EN-HCS2-L6 drive also has an HMI which can be used to program the drive, to control it, and to upload or download data into it. The nominal output rating of the 1336F-CWF75-AA-EN-HCS2-L6 drive is 7.5 Horsepower (5.5 kilowatts).

1336F-CWF75-AN-EN

The Allen-Bradley 1336F-CWF75-AN-EN drive is a motor-controlling drive in the 1336 PLUS II series which is powered by AC and DC voltage. Its voltage ratings are 500-600V AC and 775V DC. Additionally, the 1336F-CWF75-AN-EN drive generates 5.5 kilowatts or 7.5 Horsepower of nominal output power when it operates. The 1336F-CWF75-AN-EN drive has an open enclosure. It is not equipped with any interfaces for programming, control, or communication functions, but it comes with slots that can host a variety of interfaces.

1336F-LA1

The 1336F-LA1 interface module is an accessory device for Allen-Bradley 1336 PLUS II AC drives. This interface module is an analog module that must be installed in Slot B on the drive that hosts it. The 1336F-LA1 analog interface module includes a single-ended, non-isolated type of input and 2 single-ended, non-isolated types of outputs. The input and 1 of the outputs can be configured to operate with either voltage or current, but the other output only operates with current.

1336F-LA2

This Allen Bradley drive, Catalog ID 1336F-LA2, has an analog interface of two configurable inputs that are isolated from each other. It is part of the Bulletin-1336F series. These inputs are 10 Volts or 20 mA in rating. Depending on the kind of board, the optional analog interface boards for 1336 Plus II drives can be inserted in either of the two option slots, known as Slot A and Slot B. The main control board of the host drive lies underneath the terminal block known as TB2, where all option board connections are made.

1336F-LA3

The Allen-Bradley 1336F-LA3 module is an analog interface module that can be installed on a 1336 PLUS II series variable frequency drive. This analog interface module includes 2 outputs. Both of the outputs are isolated and both of them are also configurable. The 1336F-LA3 module's outputs can operate at 10 Volts or at 20 milliamps, depending on how they have been configured. The 1336F-LA3 analog interface module must be installed in Slot B on its host drive.

1336F-LA5

The Allen-Bradley 1336F-LA5 module is an accessory module for drives in the Allen-Bradley 1336 PLUS II product line. It is an optional analog interface module that can be connected to a 1336 PLUS II adjustable frequency drive in order to provide that drive with specific inputs and outputs. The 1336F-LA5 module provides its host drive with a pulse input that is isolated, a pulse output is not isolated, and a configurable output that is not isolated.

1336F-LA6

This drive, Product ID 1336F-LA6, from the Allen Bradley 1336F-bulletin series, is manufactured by Rockwell Automation. This drive has a control interface of 115 Volts in an AC supply. This drive does not have encoder feedback. The enclosures that come with drives from this series typically range from an open enclosure to one that is NEMA Type 4 and 12 rated and water-resistant. The drive and its accessories must never be exposed to weather elements like UV rays and rain, regardless of the enclosure type.

1336F-A007-AA-EN935-HCS2-LA2-LA3-L6

The Allen-Bradley 1336F-A007-AA-EN935-HCS2-LA2-LA3-L6 1336 PLUS II drive controls motors with its output frequency and different types of control technology. It comes with V/Hz control technology and sensorless vector control technology. The 1336F-A007-AA-EN935-HCS2-LA2-LA3-L6 drive also comes with several interfaces with different functions and with an "MOP reset" function. Its nominal output rating is 7.5 Hp or 5.5 kW at 200-240V AC of rated voltage. The 1336F-A007-AA-EN935-HCS2-LA2-LA3-L6 drive is housed in an IP20 enclosure.

1336F-A007-AA-EN935-MX3

The Allen-Bradley 1336F-A007-AA-EN935-MX3 AC drive is a 1336 PLUS II series AC drive which is conformally coated. The drive's conformal coat gives it a higher degree of protection from liquids and chemicals than standard uncoated 1336 PLUS II series drives have. The 1336F-A007-AA-EN935-MX3 drive also comes with an "MOP reset on stop" option that will reset the drive's MOP frequency feature to "0" after a stop. The AC voltage rating of the 1336F-A007-AA-EN935-MX3 drive is 200 to 240V AC.

1336F-A007-AA-ES-HCS2-L4

Manufactured by Allen Bradley, part number 1336F-A007-AA-ES-HCS2-L4 is an adjustable frequency AC drive. It was designed to be part of the 1336 PLUS II line of products. The voltage rating of this drive is 200 volts AC to 240 volts AC. In addition, the 1336F-A007-AA-ES-HCS2-L4 outputs 5.5 kilowatts (7.5 horsepower) of power. This device is protected via an IP20, NEMA Type 1 enclosure.

1336F-A010-AA-ES-HCS2-L4

The Allen-Bradley 1336F-A010-AA-ES-HCS2-L4 drive is an AC-powered 1336 PLUS II drive. It operates at 200 to 240V AC of voltage and at 10 Horsepower or 7.5 kilowatts of output power. The 1336F-A010-AA-ES-HCS2-L4 drive is equipped with a control interface and an HMI. The HMI is also equipped with a digital pot and with an upload/download function. The 1336F-A010-AA-ES-HCS2-L4 drive is capable of operating with 97.5% efficiency.

1336F-A010-AN-FR-GMS2-GM5-LA1-LA2

The 1336F-A010-AN-FR-GMS2-GM5-LA1-LA2 AC drive was produced by Allen-Bradley/Rockwell Automation. It belongs to the 1336 PLUS II product line. This drive operates via an input voltage that ranges from 200 to 240 volts AC. The 1336F-A010-AN-FR-GMS2-GM5-LA1-LA2 outputs 10 horsepower (7.5 kilowatts) of power. The enclosure of this product is classified as an open-type enclosure with an IP00 protection rating.

1336F-A020-AA-ES-HAS2-L4

The Allen-Bradley 1336F-A020-AA-ES-HAS2-L4 AC drive is a 1336 PLUS II series AC drive which is designed for controlling industrial motors. This Allen-Bradley drive is compatible with several other Allen-Bradley devices and easily customizable with a variety of optional features. The 1336F-A020-AA-ES-HAS2-L4 drive also has 2 optional features which are a control interface module and an HMI. This drive's voltage range is 200 to 240 Volts AC and the drive operates in English and Spanish.
Previous 1

...

24 25 26 27 Next

Displaying 50 of 1331 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP