GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Allen Bradley - Motors

1326 Motors

1326 Servo Motors

For motion applications that need precision, servo motors are the electronic devices in trend. These motors are for factory use only. 1326 servo motors by Allen Bradley are a family of high-performance motors which encompass all the needed features of high-quality servo motors. 1326 servo motors, coupled with an appropriate controller, are used for multiple applications. Majorly, these servo motors are used with 1391 controllers which are AC servo controllers in essence. These motors are AC motors, their construction is brushless, and their production of flux is synchronous. These motors are equipped with a resolver which gives sinusoidal or co-sinusoidal feedback for determining the position or speed of the rotor. The construction and specifications of these motors are discussed in detail here below.

Construction and Characteristics of the 1326 Family

Stator Windings of 1326 Servo Motors

The material and construction of stator windings impact motor life, efficiency, cooling systems, etc. In other words, careful construction of stator windings is very important. Currently, the sinusoidal winding technique, being the most successful technique, is used to suppress higher harmonics in the air gap magnetic field so the edges of the MMF are smooth or MMF is as much sinusoidal in shape as possible. 1326 motors also employ this technique for constructing stator winding which makes these motors efficient, paves way for noiseless and smooth operation even at low speeds, and allows heat transfer to the ambient. Furthermore, for thermal overload or overheating indications, this winding has a unique solution. A thermal switch is connected in series in the winding which is normally closed. If the winding temperature goes beyond the stipulated limit, this switch would open a disconnecting winding current and thus bring the motor to halt. Typically, the switch will open at 150 °C and closes when the temperature goes back to 90 °C to 100 °C.

To keep losses low and winding safe, its insulation is also paid heed to. Allen Bradley has used an insulation system for windings of this 1326 servo motor family which is UL recognized.

Rotor of 1326 Servo Motors

For a more quick and accurate response of the motor, after getting the control signal, the use of magnets is preferred over the use of reluctance action or induction. Therefore, rotors of 1326 servo motors are also using high-energy permanent magnets for the generation of flux and quick response. To keep motor costs low while maintaining good performance standards, ferrite magnets are used. Different stack lengths of magnets are made available for these motors.

Voltage Classes

For several families or series of servo motors from Allen Bradley, voltage classes are 200 and 400 volts. And those motors operate at 220V and 440V approximately. However, when it comes to 1326 servo motors, they have voltage classes of 460V and 380V. This corresponds to their use and application (note these motors are exclusively for factory use).

Holding Brakes for the Motors

Allen Bradley has designed 1326 servo motors with integral holding brakes. These brakes are spring set brakes that have options of 90V DC (with codes ‘A4’, ‘A5’, ‘A7’) or 24V DC (with codes ‘K4’, ‘K5’, ‘K7’) coils. A4, A5, and A7 with 90V DC brake have 8.1Nm, 13.6Nm, and 45.2Nm holding torque respectively. Similarly, K4, K5, and K7 with 24V DC brake have holding torque values 8.1Nm, 13.6Nm, and 45.2Nm respectively.

To obtain 90V DC voltage for brakes, the brake power supply (code ‘1326-MOD-BPS) is there which converts 115VAC to the needed DC voltage level. This power supply is a modification kit. It has a single-phase, full-wave rectifier in its circuitry. This rectifier has a surge suppressor for safe operation and is screw-mounted. One rectifier (in other words one power supply) can power up to 4 brakes.

For 24V DC brakes, the user can use a power supply that will give 24V DC output with the current ranging between 0.88A to 1.2A.

The brake in 1326 servo motors keeps the load at rest. Moreover, it can also provide limited braking torque in the case of an emergency. Users of this servo motor are suggested by Allen Bradley to ensure that the brake is not energized and de-energized more than 90 times in an hour when it is serving as a parking brake. Because in such a situation it might pose harm.

Feedback Signals and Resolver

For an efficient and precise response of the motor after getting the input signal, controllers need to get position or velocity feedback or calculate estimates of these parameters. In 1326 servo motors, Allen Bradley has used a brushless resolver (standard) which feedbacks position, velocity, and commutation information to the controller. Resolvers installed in servo motors come in single-turn (code ‘S’) or multi-turn (code ‘M’) configurations.

Motors with single-turn configuration give two million counts in one revolution to provide the precise position of the rotor. On the other hand, motors with the multi-turn configuration give one million counts in one revolution and the absolute position of the rotor in 4096 revolutions. This is to provide a reference position upon the start-up of the machine.

There exists no on-board electronic circuitry rendering the machine more rigid and sturdy in harsh environments. This makes the system tolerate relatively higher temperatures and more vibrations.

Encoder-installed 1326 servo motors are also an option.

For obtaining feedback signals, sealed cables are provided by the manufacturer (details in cables section).

These motors are IP65 or IP67 compliant (depending upon the presence of shaft seal). If one tends to use an encoder or resolver mounted externally, then the motor loses IP65 and IP67 rating compliance.

In the accessories package of 1326 servo motors, a feedback mounting adapter kit is also included. These kits are of 8 different types. Each type of kit includes a feedback device mounting adapter, as well as mounting hardware. Allen Bradley warns its buyers that in 1326 servo motors, one shouldn’t use a feedback adapter mounting kit if a high-resolution encoder is used for feedback purposes.  Some of these entail motor to encoder coupling.

Shaft and Shaft Seal

1326 servo motors have vertical shafts suitable for upward, as well as downward, mounting. To make couplings safe, there is a threaded hole in the face of the shaft. For this servo motor family also, a shaft seal option exists. The use of a shaft seal will make the motor bear rough environmental conditions. It will make the motor dust-tight and enable it to bear water jet pulses while water won’t enter the motor. These shaft seals are made of Viton material, and it is not necessary to disassemble the motor to install this shaft seal. Shaft mounting has options of Std. Inch and Metric.

In the accessory package for this motor, Allen Bradley has also included Shaft Oil Seal Kit manufactured specifically for the 1326 servo motor family (with the configuration number ‘1326AB–MOD–SSV–xx). This kit can be used where the motor shaft will be subject to oil splashes. Anyhow, if the motor shaft will be submerged in oil or other liquids, either partially or totally, then this kit can’t be used.

The presence and absence of a shaft seal impact the compliance with ratings and standards as well. For these motors, an IP65 rating is standard. Anyhow, after the installation of the shaft seal, the equipment becomes compliant with IP67 (depicted with code ‘L’). Being IP67 compliant means that the motor can be submerged in water for half an hour and that this water body should not be deeper than one meter. IP67-rated motors are provided by the manufacturer with a shaft seal installed at the factory and thus they don’t need a shaft oil kit.

Torque Output

1326 servo motors have quite good torque density. These motors are capable of providing 100% continuous rated torque at standstill conditions. If a blower cooling kit is used to keep the motor’s temperature low, then 35% more torque can be obtained on almost all ‘C’ frame motors of the 1326AB family. This Blower Cooling Kit (with the configuration number ‘1326AB–MOD–Mx) comes as an accessory by Allen Bradley. This kit can also be used for motors that have brakes. Moreover, this kit can be filed mounted for 1326AB–Cxx type motors on their rear side. For these motors, rated torque is measured when the ambient temperature for the motor is 40°C, the controller’s ambient temperature is 60°C and windings are at their rated temperature. Typically, peak torque is 200% of the rated torque but it can go up to 300% of rated torque if RMS (Root Mean Squared) torque is equal to or less than the rated torque.

Thermal Management

The construction of these 1326 servo motors is TENV (totally enclosed non ventilated). Therefore, air doesn’t blow from the inner parts of the motor to the ambiance freely. Instead, external fans or blowers are used to keep the temperature low. As mentioned earlier, Allen Bradley provides Blower Cooling Kits as an accessory to keep the temperature under the limit. Furthermore, two thermal switches are attached in series. Upon detection of temperature above the stipulated limit, switches open and interrupt the operation. These switches open if the temperature reaches 150°C and close the circuit when the motor cools down to 90°C - 100°C. One of these switches is rated at 1A and 115V AC while the second one is at 1A and 24VDC.

It must be noted that the 1326 servo motor family is IP65 rated. If the user uses a blower package mounted externally then the motor no longer remains compliant with the IP65 rating.

For these servo motors, the outer structure is extruded which is built with Aluminium which further enhances prospects for better heat discharged into the environment.

Cables and Connectors

Allen Bradley gives the option of three types of cables for resolver feedback and power for 1326 servo motors. These are known as standard cable (flex cable), track cable (multi flex cable), or extended-length cable (ES). All three cables are environmentally sealed. These cables come in lengths up to 30m. While using a 1391B–ES drive or a 1391–DES drive, cables with lengths up to 90m (extended length cable) are available. Allen Bradley warns its users to hang or lay flat all cables 24 hours before installation.

As far as connectors are concerned, for 1326 servo motors, MIL-spec connectors (military connectors) are standard. These are shell-type connectors so the connection is not affected by ambient conditions and equipment could be used in harsh environments also. These connectors are mounted radially with the motor.

Like many other accessories, Allen Bradley provides Junction Box Kit having the catalog number 1326AB–MOD–RJxx, which has a connector mounted axially. This version of the connector allows the user to bring the motor connector axially towards the motor and not radially. This makes one avoid any further wiring also. Anyhow, the use of the Junction Box Kit makes 1326 servo motors lose their IP67 rating.

Memory

Having onboard memory is among the unique features of 1326 servo motors. Motors with both types of configurations (single-turn and multi-turn) have EEPROM (Electrically Erasable Programmable Read-only Memory) memory onboard. This is basically to store configuration information of motor which will save some time upon start-up.

Frame Length and Diameter

1326 servo motors are lettered sequentially corresponding to increasing frame diameters. Like code ‘A’ is for a motor having 4.25 inches frame diameter, ‘B’ for 5.88 inches diameter, and ‘C’ for 7.63 inches diameter. Similarly, for the given frame sizes, stack lengths are represented by numbers assigned sequentially.

Speed Output of 1326 Servo Motors

Allen Bradley’s 1326 family of servo motors can yield a maximum operational speed of up to 5000 rpm. For ES and DES motors, this speed goes as high as 6000 rpm (revolutions per minute). Different operation maximum speed options are assigned alphabetic codes. The codes and respective maximum speeds are mentioned below.

  • Code ‘B’ for a standard maximum operational speed of 1600 rpm and 2000 rpm for ES/DES motor options.
  • Code ‘C’ for a standard maximum operational speed of 2000 rpm and 3000 rpm for ES/DES motor options.
  • Code ‘E’ for a standard maximum operational speed of 3000 rpm and 4000 rpm for ES/DES motor options.
  • Code ‘G’ for a standard maximum operational speed of 5000 rpm and 6000 rpm for ES/DES motor options.

Torque speed curves for these servo motors detail motor performance. If a motor and controller running at a specific speed yield 70% of the continuous rated torque, that speed will be designated as the rated speed. Anyhow, at that time, the motor will be running at 25°C, and the controller temperature at 60°C.

Performance Analysis

As already mentioned, Allen Bradley’s 1326 servo motors are used for high-end motion applications. The smart construction of the machine, presence of multiple tools, and high-resolution feedback system enable these servo motors to perform servo applications accurately. More specifically, 1326 servo motors provide 0.0005 inches or 0.0127mm precision balance in total peak-to-peak displacement.

Browse our selection of 1326 Motors units

AutomationStop.com's online catalog offers one of the largest selections of preowned 1326 Motors units in the world.

1326AB-B720E-M2K7LS

Part of the Torque Plus series by Allen Bradley, the 1326AB-B720E-M2K7LS servo motor is engineered with an IP 67 standard ingress protection rating, making it an excellent choice for use in demanding industrial environments. Its compact size, versatile design, and durable construction make it ideal for integration into existing systems and ensure reliable and efficient performance. This high-performance servo motor is suitable for precision machining, robotics, and motion control systems, providing exceptional accuracy and precise control.

1326AB-B720E-M2L

The Allen-Bradley Torque Plus 1326AB-B720E-M2L motor is a servo motor that operates with AC voltage and that features permanent magnets. Its AC voltage ratings include 380V AC and 460V AC. The 1326AB-B720E-M2L servo motor also operates at 17.5 Amps of current, 30.9 N-m of torque, 6.8 kW of output power, and 3500 RPM of speed. It supports multi-turn high-resolution feedback. The 1326AB-B720E-M2L servo motor's magnets are made of ferrite.

1326AB-B720E-S2L

The Allen-Bradley 1326AB-B720E-S2L motor is an industrial servo motor that has an IP67-rated enclosure and a single-turn feedback encoder. This 1326AB Torque Plus series motor also has a frame whose diameter is 194 millimeters. The 1326AB-B720E-S2L motor supports a maximum rated speed of 3500 RPM and it can support input voltage ratings of 460/380V AC. The motor's enclosure has an IP rating of IP67 and this enclosure protects the motor from significant amounts of water and debris in its environment.

1326AB-B720F-21-K7

The Allen-Bradley 1326AB-B720F-21-K7 motor is a 1326AB servo motor that can handle a variety of high-performance applications. It includes ferrite magnets which are powerful permanent magnets. The 1326AB-B720F-21-K7 motor can support a 460V AC input voltage rating or a 380V AC input voltage rating. It is compatible with some Allen-Bradley Bulletin 1394 series axis modules. The 1326AB-B720F-21-K7 motor can sustain an operating speed of up to 5000 RPM.

1326AB-B720F-S2L

The Allen-Bradley 1326AB-B720F-S2L motor is a servo motor that is AC-powered and based on permanent magnet technology. It is a Bulletin 1326AB Torque Plus series servo motor. The 1326AB-B720F-S2L motor can support input voltage ratings of 380 Volts AC or 460 Volts AC. This motor also uses a single-turn high-resolution encoder for feedback when it operates. The 1326AB-B720F-S2L motor can support 5000 RPM of operating speed and 31.8 N-m of rated torque.

1326AB-B730E-21

The 1326AB-B730E-21 motor is an Allen-Bradley Bulletin 1326AB Torque Plus servo motor that is AC-powered and that uses permanent magnet technology. It is powered by 380V AC or 460V AC in different applications. The 1326AB-B730E-21 servo motor uses resolver-based feedback. Its permanent magnets are made of ferrite. The 1326AB-B730E-21 servo motor's torque rating is 39 N-m. It generates 9.6 kilowatts of output power and supports 22.8 Amps of current.

1326AB-B730E-21-L

The Allen-Bradley/Rockwell Automation 1326AB-B730E-21-L servo motor is an AC-powered permanent magnet servo motor from the Allen-Bradley 1326AB Torque Plus series. The torque rating of this motor is 39 N-m. The 1326AB-B730E-21-L motor supports a resolver that provides it with feedback. This motor also has a metric flange with a keyway and a frame with a 194-millimeter diameter. The 1326AB-B730E-21-L motor is rated for 380 or 460V AC of input voltage.

1326AB-B730E-M2K7L

The 1326AB-B730E-M2K7L servo motor is a high-performance AC motor for various industrial applications. It belongs to the Allen-Bradley 1326AB series of brushless AC servo motors and has a magnet stack length of 30 millimeters and a frame diameter of 194 millimeters. The motor can operate at 460 Volts AC or 380 Volts AC and has a rated speed of 3350 RPM and 2800 RPM at 460 and 380 Volts AC input voltage, respectively, at 77 degrees Fahrenheit. The motor comes with a multi-turn high-resolution encoder that provides precise position feedback and a 140 pounds on an inch holding brake for added safety and control.

1326AB-B730E-M2L

In addition to its high-performance capabilities, the 1326AB-B730E-M2L servo motor has a magnet stack length of 30 millimeters and a frame diameter of 194 millimeters. Its insulation system is UL listed and has a CEI/IEC 72-1 metric flange mount with metric shafts. The motor's extruded aluminum housing allows for efficient heat transfer, and it can be mounted in any direction with its shaft facing upward or downward. The 1326AB-B730E-M2L servo motor also comes with a holding brake rated at 140 pounds on an inch, making it an ideal choice for a wide range of industrial applications.

1326AB-B730E-M2LS

The 1326AB-B730E-M2LS servo motor has a rated output power of 9.6 kilowatts and a rated torque of 39 N-m. Its high-performance capabilities make it well-suited for various applications requiring precise and accurate motion control. However, operating the motor in environments where the surrounding temperature is kept below 104 degrees Fahrenheit is recommended to ensure optimal performance. This is due to the motor's internal components, which can be sensitive to extreme temperatures.

1326AB-B730E-S2L

To mount the 1326AB-B730E-S2L servo motor, Allen-Bradley recommends using M12 size bolts with a screw length of 1.57 inches and a torque of 108.4 to 135.5 N-m to ensure optimal performance. This servo motor is designed for vertical mounting with the shaft at any required angle, allowing for flexibility in various industrial applications. The 1326AB-B730E-S2L servo motor is a high-performance AC motor with a rated torque of 39 N-m and a rated output of 9.6 kW. It is designed to operate in harsh environments and comes with an IP67 environmental rating, which protects against dust and water ingress.

1326AB-B740C-21

The Allen-Bradley 1326AB-B740C-21 motor is a permanent magnet type of servo motor. It is part of the Torque Plus series of 1326AB motors and it is rated for 460V AC/380V AC of input voltage. The 1326AB-B740C-21 motor also has an output power rating of 8.7 kilowatts, a torque rating of 53 N-m, and a current rating of 20.9 Amperes. The feedback that this motor operates with is resolver-based feedback.

1326AB-B740C-21-K7

The Allen-Bradley 1326AB-B740C-21-K7 is a servo motor from the Bulletin 1326 Torque Plus Series. This servo motor has a built-in holding brake that uses a 24V DC coil and can generate a torque rating of 41 N-m or 140 pounds on an inch. It has a voltage rating of 460V AC, an output power rating of 8.7 kilowatts, a rated torque of 53 N-m or 469 pounds on an inch, and a rated speed of 2200 RPM.

1326AB-B740E-21-K7

One of the standout features of the 1326AB-B740E-21-K7 servo motor is its special flux profile permanent magnets, which enhance the motor's response and improve its overall performance. These permanent magnets are carefully engineered by Allen-Bradley to ensure that the servo motor operates with maximum efficiency and precision. In addition to the special flux profile permanent magnets, the 1326AB-B740E-21-K7 servo motor also has a sinusoidal-wound stator with a 3-phase voltage. This design ensures that the motor operates smoothly at low speeds, which is essential in many industrial applications that require precise control and accuracy.

1326AB-B740E-21-L

The Allen-Bradley Bulletin 1326AB Torque Plus 1326AB-B740E-21-L servo motor operates with permanent ferrite magnets that are arranged in a 4-inch-long stack. Its metric flange is an IEC metric flange and it has a keyway. The 1326AB-B740E-21-L servo motor can use resolver-based feedback in some applications. It can operate with voltage ratings of 460V AC or 380V AC. The 1326AB-B740E-21-L servo motor's frame has a diameter of 194 mm.

1326AB-B740E-M2L

The 1326AB-B740E-M2L servo motor features a 3-phase sinusoidal-wound stator field, which helps to ensure smooth low-speed operation. The motor also boasts a 100% continuous-rated output torque at the motor stall, meaning it can deliver maximum torque output even when it is not rotating. The motor can be mounted vertically at an angle with the shaft facing up or down, which helps to improve efficiency and maximize performance. The motor is housed in a TENV (Totally Enclosed Non-Ventilated) construction, making it ideal for use in environments where dust, moisture, and other contaminants are a concern. The motor features a UL-listed insulation system that protects against electrical shock and other hazards.

1326AB-C2E-11

The 1326AB-C2E-11 by Rockwell Automation is an AC permanent magnet designed to deliver high performance in industrial applications. This motor has a large frame diameter of 194 mm and can operate at a maximum speed of 3000/4000 RPM, generating a power output of 5.2 KW and a torque of 23.7 NM. With a current draw of 33.2 AMP, it is excellent for various applications requiring precise and efficient motion control.

1326AB-C3E-11

The Allen-Bradley 1326AB-C3E-11 servo motor is a Bulletin 1326AB high-performance permanent magnet servo motor. Its flange has a keyway and its flange is an inch combination face/flange. The 1326AB-C3E-11 servo motor can support operating speeds of 3000/4000 RPM and it can generate 7.5 kilowatts of output. Its current rating is 49.1 Amperes. The 1326AB-C3E-11 motor is a brushless type of permanent magnet servo motor. It can be mounted with its shaft pointing or with its shaft pointing down.

1326AB-C3E-11-2287B

The 1326AB-C3E-11-2287B motor also features a three-phase sinusoidal-wound stator that ensures smooth operation at low speeds. 1The motor has a thermal time constant of 45 minutes and is designed for use in a wide range of industrial applications. The motor also includes a multi-turn absolute encoder with a resolution of 18 bits that allows for precise positioning control. The encoder provides accurate feedback on the motor's position and speed, allowing real-time adjustments to maintain precise control over the application. The motor also includes an anti-cogging design to smooth operation and reduce noise.

1326AB-C3E-11-A7

The Allen-Bradley 1326AB-C3E-11-A7 motor is a highly versatile and adaptable motor that has been designed for use in a wide range of industrial applications. The motor is designed to provide reliable and efficient performance, thanks to its 3-phase input and inch combination face/flange, making it easy to mount in different setups. One of the standout features of the 1326AB-C3E-11-A7 motor is its 72 pounds on an inch-rated holding brake, which ensures that the motor stays in place when it is not in operation.

1326AB-MOD-M50

The 1326AB-MOD-M50 adapter kit is a valuable component that can help improve the performance and accuracy of B5 series Allen-Bradley 1326AB motors. By attaching an 845H encoder to the motor, the adapter kit allows for greater control and precision in servo system applications. This is particularly important for high-precision industrial applications where accuracy and reliability are essential. The adapter kit is compatible with several 1326AB-B5xxx-21, -A5xxx-21, and -Bxx-xx series motors, providing users with various feedback options to choose from. High-resolution servo motors with single or multi-turn configurations come with an EEProm that stores motor configuration data.

1326AB-MOD-RJAB1

The Allen Bradley 1326AB-MOD-RJAB1 Allen-Bradley junction box toolkit is a versatile and complete solution for mounting and connecting motors to the junction kit. The kit also includes three different screw sizes to accommodate various installation requirements. The 1326AB-MOD-RJAB1 Allen-Bradley junction box is designed for easy installation and can be used in various industrial applications. Preparing the rotor connectors before installing the junction kit is recommended to ensure a smooth installation process.

1326AB-B530E-21

The Allen-Bradley 1326AB-B530E-21 servo motor is designed to handle demanding industrial applications. It is a Bulletin 1326 and Torque Plus series servo motor and it uses permanent magnets. The 1326AB-B530E-21 servo motor can operate with resolver-based feedback. Its IEC metric flange has a keyway. The 1326AB-B530E-21 servo motor supports an operating speed of up to 3000 RPM. It can also support 460V AC or 380V AC of rated voltage.

1326AB-B2E-11

In addition to its high-speed capabilities, the 1326AB-B2E-11 servo motor has an output power rating of 2.5 kilowatts in a 1391B system. This means that it is capable of producing a significant amount of torque, making it suitable for a variety of applications that require high power output. This AC voltage also allows the motor to maintain a high level of efficiency, which is important for reducing energy consumption and extending the motor's lifespan.

1326AB-B3E-11

The 1326AB-B3E-11 servo motor is part of the 1326AB AC servo motor series. It is engineered to operate with low inertia, making it an excellent choice for precise motion control applications. Its aluminum enclosure protects the internal components, ensuring a long lifespan in demanding industrial environments. The 1326AB-B3E-11 servo motor can produce high levels of torque, making it ideal for heavy-duty applications requiring reliable and robust motors. Overall, the 1326AB-B3E-11 servo motor is a versatile and durable motor that offers excellent performance and reliability for various industrial applications.

1326AB-B520F-21-K5

The Allen-Bradley 1326AB-B520F-21-K5 motor is a permanent magnet servo motor from the 1326AB Torque Plus product line. It is AC-powered and it supports voltage ratings of 380V AC or 460V AC. The 1326AB-B520F-21-K5 servo motor has a rated motor speed of 3000 RPM at 380V AC and 3500 RPM at 460V AC. Its flange has a keyway and it is an IEC metric type of flange. The 1326AB-B520F-21-K5 servo motor comes with a 24V DC holding brake.

1326AB-B520F-21-L

The 1326AB-B520F-21-L high-performance Allen-Bradley servo motor is a powerful and efficient component designed to meet various industrial applications' demands. With a continuous stall torque rating of 13.2 N-m, a max stall torque rating of 39.3 N-m, a current rating of 12.4 Amperes, and a power rating of 2.9 kilo-watts, this servo motor is capable of delivering high-performance results. The servo has a shipping weight measurement of 27.7 kilograms, which is a testament to its durability and robust construction. Its peak operating velocity rates at 3500 revolutions per minute, so it can perform quickly and accurately.

1326AB-B520F-M2LS

The Allen Bradley Servo Motor 1326AB-B520F-M2LS is a reliable, high-performance motor designed with safety and efficiency. One of the key safety features of this servo motor is its IP67 environmental rating, which means that it is fully protected against dust and temporary immersion in water for up to 30 minutes. This ensures that the servo motor can be used in various industrial applications without worrying about hazardous risks. To ensure optimal performance, it is recommended to couple the Allen Bradley Servo Motor 1326AB-B520F-M2LS with a compatible motor controller, also available from the same manufacturer.

1326-CCU-015

The Allen-Bradley Bulletin 1326 1326-CCU-015 cable is a motor cable that is compatible with Torque Plus series servo motors. This cable weighs about 2.7 pounds and it is a 15-meter cable. The 1326-CCU-015 motor cable is a standard type of commutation feedback cable. Its ingress rating is IP65 and it can be used safely in some harsh environments. The 1326-CCU-015 cable is protected from electromagnetic interference (EMI).

1326-CCU-060

The 1326-CCU-060 cable is a reliable and high-performance motor feedback connector manufactured by Allen-Bradley. This cable comes with a bulkhead connector and is designed to operate in a tough industrial environment. It is a standard/flexed cable, which means it has the flexibility to bend and curve without losing signal quality or breaking down. The 1326-CCU-060 cable features a braided shield, which provides superior immunity against electromagnetic noise, ensuring that it delivers accurate and reliable feedback signals. The push and pull connectors at both ends of the cable make it easy to install and maintain, which saves time and effort in maintenance and repair operations. The cable's high-resolution motor feedback design ensures precise motor control and positioning, which makes it ideal for various industrial applications that require accuracy and efficiency.

1326-CCU-EL-060

The 1326-CCU-EL-060 cable is a waterproof and long-length cable designed for use in harsh industrial environments. It has a length of 60 meters, making it easy to connect to a drive located far away. The cable features an IP 67 rating, which means that it is fully protected against dust and temporary immersion in water, making it ideal for use in applications where harsh conditions are experienced during operations. The 1326-CCU-EL-060 cable is a standard cable that features a bulkhead connector, which is one of the several kinds of accessories that it supports. The bulkhead connector has a mounting hole 0.132 inches wide and uses a 3/8 inches screw. Installing a bulkhead connection requires using a Philips screwdriver or a drill and drill bits.

1326-CCU-L-060

The 1326-CCU-L-060 cable is a high-quality motor cable compatible with the Allen-Bradley 1394 motion control system, making it a versatile and reliable solution for various industrial applications. This cable is a high-flex cable, which means that it is designed to bend and curve without losing signal quality or breaking down. One of the significant benefits of the 1326-CCU-L-060 motor cable is its high level of electromagnetic noise immunity. The cable features a braided shield wire that protects the electrical equipment and the surrounding environment from any electromagnetic interference generated during operations.

1326-CCUT-L-060

The Allen-Bradley 1326-CCUT-L-060 cable is an industrial cable for servo motors from the Torque Plus series. It is a resolver feedback connector type of cable. The 1326-CCUT-L-060 cable is also a flex cable. It weighs about 12 pounds and it is 60 meters long. The 1326-CCUT-L-060 cable supports an IP67 protection rating. It meets the CE standards The 1326-CCUT-L-060 cable is compatible with resolver-based servo motors and encoder-based servo motors.

1326-CCUT-L-090

The 1326-CCUT-L-090 wire is an excellent choice for local & remote wiring configurations. This versatility makes the 1326-CCUT-L-090 cable ideal for various industrial applications. The wire has a max length of 90 meters, providing ample length for longer cable runs. The minimal bend radius score of 101.6 millimeters ensures that the cable can be routed through tight spaces without damage or degradation of performance. The wire has a max diameter of 40.4 millimeters, allowing easy installation in tight spaces.

1326-CFU-50

The cable has a white wire, a red wire, a green wire, and 3 shield wires, all of which are individually isolated. The white wire connects to the TB1-1 terminal, while the red wire connects to the TB1-7 terminal, and the green wire connects to the TB1-13 terminal. The 1326-CFU-50 cable assembly also features a 6-pin connector housing that can be easily plugged into a compatible connector on the motor or drive.

1326-CPB1-015

The 1326-CPB1-015 cable is an Allen-Bradley Bulletin 1326 cable that was manufactured to be used with Bulletin 1326 servo motors. It is a power cable and its length is 15 meters. The 1326-CPB1-015 power cable supports an ingress rating of IP65. The 1326-CPB1-015 cable is a stationary or tray-rated power cable and it is designed to be used in 1-time flex applications.

1326-CPB1-060

The 1326-CPB1-060 Series B Allen-Bradley motor power wire is a top-of-the-line power cable engineered to meet the specific requirements of the 1326 servos and the 1394 motion controller system. This cable has been UL listed, which means it is certified for use in standard industrial applications, assuring users of its quality and reliability. One of the most notable features of the 1326-CPB1-060 cable is its braided wire shield. This shield is designed to provide superior immunity to electromagnetic interference (EMI), a common issue that can cause signal interference and affect motor performance in industrial applications.

1326-CPB1-090

The 1326-CPB1-090 cable is designed with high-quality materials to ensure that it can withstand the demands of industrial environments. The cable is highly durable and resistant to abrasion, chemicals, and oils. This makes it ideal for use in harsh environments that may cause other cables to deteriorate quickly. The cable's superior electromagnetic shielding helps to reduce the risk of electrical interference, ensuring that the servo motor operates smoothly and without interruption. The cable's push/pull connector design makes it easy to install and maintain, reducing downtime and improving overall efficiency.

1326-CPB1-EL-060

To ensure the optimal performance and lifespan of the 1326-CPB1-EL-060 cable, it is essential to follow specific guidelines during installation and use. One of the most important guidelines to keep in mind is to keep the cable away from heat-emitting devices. This will help protect the cable from overheating, which can damage and potentially cause operational issues with the servo motor. Another important guideline for installing the 1326-CPB1-EL-060 cable is to place it into the cable carrier without weaving it between or around other cables. Sufficient clearance should also be left between the cables, and the use of separators between the cables is recommended.

1326-CPB1T-L-015

The 1326-CPB1T-L-015 power cable is a vital component for Allen-Bradley servo motors. This high-flex cable, equipped with a flying leads connector with 9 pins, is designed to deliver power to the 1326AB-B4xx and 1326AB-B5xx motors with 4/48 frames. It has a durable design that can withstand harsh environments and a braided shield that enhances electromagnetic noise immunity. This cable has an IP 67 rating, shielding it from water and dust.

1326-CPB1T-L-060

The Allen-Bradley 1326-CPB1T-L-060 cable is a Bulletin 1326 cable designed for use with Bulletin 1326 servo motors. It is a flex cable and it is 60 meters long. The 1326-CPB1T-L-060 flex cable weighs about 10.01 pounds. It has a flying lead that allows users to figure out what type of cable termination would be the most appropriate for it. The 1326-CPB1T-L-060 cable should not be coiled on itself because this may cause heat to build up and damage the cable's insulation.

1326-CPC1-D-005

The 1326-CPC1-D-005 power connection cable is an essential accessory for motors with 4/48 frames, providing a reliable connection for power and control signals. The double-ended connector with a molded push/pull design ensures easy and secure installation, and the 9-pin to flying leads configuration provides flexibility in wiring. The cable's braided shield enhances its electromagnetic noise immunity, ensuring that the signals transmitted through the cable are not interfered with by external electrical noise. The cable also has a standard IP65 rating for ingress protection, ensuring it can withstand dust and moisture exposure. The 1326-CPC1-D-005 cable is UL listed, which means it meets the stringent safety and performance standards of Underwriters Laboratories, a globally recognized safety certification organization.

1326-CPB1-030

The 1326-CPB1-030 cable is a high-quality power cable that is designed to be compatible with the Allen-Bradley 1326 servo motors and the 1394 motion control system. The cable has a total length of 15 meters (49 feet) and a maximum bend radius of 76 millimeters, making it suitable for various industrial applications. The 1326-CPB1-030 cable comes with a UL-listed assembly that includes a standard power cable and an installation kit. This kit includes a connector housing, a plastic insulation body, nine contact pins, and an installation manual. The cable is rated IP 65, which means it is environmentally sealed and protects against harsh industrial conditions.

1326AS-B330H-21

The 1326AS-B330H-21 is an Allen-Bradley AC servo motor by Rockwell Automation. It is designed with a frame diameter of 75 mm and operates on 460V AC voltage. This servo motor can achieve a rated speed of 6500 rpm, making it suitable for high-speed applications. The flange and shaft series are IEC Metric with a keyway. Its rated torque is 2.0 Nm, with an output of 0.9 kW. It also offers a system continuous torque of 2.1 Nm and a system peak stall torque of 5.6 Nm.

1326AS-B330H-21-K3

When it comes to industrial automation, precision, and efficiency are crucial. The Allen Bradley 1326AS-B330H-21-K3 brushless motor is such a valuable component. This means that it can accelerate faster and more accurately than many other motors on the market. The Allen Bradley 1326AS-B330H-21-K3 is part of the renowned Bulletin 1326 servo motors series from Allen-Bradley. These servos are known for their reliability and performance, and the 1326AS-B330H-21-K3 is no exception.

1326AS-B420G-21

As the heart of many industrial applications, the 1326AS-B420G-21 servo motor is built to handle the toughest environments. Its extruded aluminum casing is designed to efficiently manage heat transfer within the system efficiently, ensuring reliable and optimal performance even under the most demanding conditions. The motor's rugged two-pole brushless resolver is another feature that adds to its durability and reliability. The motor can operate in challenging environments without sacrificing performance by providing accurate position feedback without needing onboard electronics.

1326AS-B440G-21

The 1326AS-B440G-21 servo motor is a high-performance motor designed to operate in demanding industrial environments. One of its key features is its 4096 pulses per rotation of resolver feedback, which enables precise and accurate motion control. The motor also features a thermal-sensitive alarm sensor, which helps prevent overheating and prolongs the motor's lifespan. The 1326AS-B440G-21 servo motor is housed in specially designed aluminum housing, which protects its internal windings and circuits from the severe shocks and vibrations common in industrial surroundings.

1326AS-B440G-21-K4

The 1326AS-B440G-21-K4 servo motor is a versatile and reliable component that offers a range of features and benefits for various industrial applications. One of the most notable features of this servo motor is its UL-listed insulation system, which ensures that the motor is safe to use and meets high industry standards for quality and performance. The servo motor is constructed with a TENV design, which stands for Totally Enclosed Non-Ventilated. This design makes it ideal for use in harsh environments where protection against dust, dirt, and other contaminants is critical. The servo motor's three-phase sinusoidally-wound stator field provides smooth operation at low speeds, which makes it a perfect solution for precision applications that require smooth and accurate motor control.

1326AS-B460F-21

The Allen Bradley 1326AS-B460F-21 is a high-performance servo motor designed for industrial applications. It has a power output of 2.2KW and generates a torque of 9.0NM at a maximum speed of 4000 RPM. This 3-phase motor is compatible with 460V input voltage and has a current draw of 6.2A. It is a reliable and efficient option for precision motion control in manufacturing, automation, and robotics applications, where speed and accuracy are essential.

1326AS-B460F-21-K4

The 1326AS-B460F-21-K4 servo motor is a highly efficient and versatile device compatible with Kinetix-integrated solutions from Allen-Bradley. When paired with Kinetix 6000 or Kinetix 2000 servo drives, it delivers exceptional motor performance that meets the most demanding industrial motion control needs. A fan can be added to enhance its performance to provide additional cooling for the motor. With compact measurements of 70 millimeters x 40 millimeters x 40 millimeters (2.75 x 1.58 x 1.58 inches) and a weight of only 0.5 kilograms (1.1 pounds), the 1326AS-B460F-21-K4 motor is a space-saving and lightweight solution suitable for various industrial applications.

Previous 1 2 3 Next

Displaying 50 of 111 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP