GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Emerson - GE Fanuc

Series 90-70

The GE Fanuc programmable logic controllers (PLCs) belonging to the Series 90-70 product family consist of various I/O systems, controllers, and different modules that have special purposes. All the PLCs belonging to this series employ microprocessors with a Boolean coprocessor. Therefore, these Series 90-70 PLCs are capable of performing Boolean functions at a very high speed at the rate of 0.4 microseconds per function. This product series allows for a wide range of VME boards from different manufacturers to be integrated with the backplanes. It is widely used in industries to perform complex tasks, such as processing that requires high speed and are processed in a batch, tasks that need a maximum of 6 Megabytes of memory, and input-outputs that reach 12,000. The Series 90-70 product family also offers an option for triple modular redundancy and hot standby features. In case of a failure or an error amongst the components, the hot standby feature is beneficial in the sense that it allows for critical operations to continue. The communication options offered by this series is wide, including communication over Genius LAN, Ethernet TCP/IP, reflective memory, as well as other serial communications module. It is ideal for use as a factory floor server. Series 90-70 PLCs can be used for data collection and integration with ERP systems with ease. The temperature that is necessary for operations for the components within the series ranges from 0 degrees Celsius to 60 degrees Celsius. The VME boards integrated into this series provide links to servo motor controllers, drives, drive systems, buses, and bus interfaces.

GE Series 90-70 PLC

Series 90-70 controllers are Programmable logic controllers with a more powerful processor, high computing power, and large memory to perform more complex tasks. These controllers offer more redundancy making them capable of use for complex applications like triple modular redundancy. These PLCs are equipped with more ways of communication so they can also be used for applications where larger numbers of I/O (inputs/outputs) are needed. The high computing power of GE Series 90-70 controllers makes them a good choice for applications demanding high-speed processing.

This is an industrial product by nature. If one tends to use these controllers in a domestic environment, it might cause interference in radio communications as the device can radiate energy in form of radio frequency. Anyhow, the user can take measures on its own in this regard.

About the Manufacturer

GE Series 90-70 PLC controllers being GE Fanuc State logic products combine the expertise of Adatek, Inc. and GE Fanuc. Adatek has experience in the application of principles pertaining to State Logic to industrial control. Meanwhile, GE is well-versed in hardware expertise in control systems. 90-70 Series diagnostic systems are the result of the expertise of both companies.

PLC CPUs

Central Processing Units (CPUs) in Series 90-70 PLCs (Programmable Logic Controllers) are of wide category. Many processors have been discontinued and have become obsolete. Yet a large number of CPU types with different memory sizes, processor types, speeds, bit sizes, and expandability are available.

  • IC697CPU731 is a Central Processing Unit with 32 kilobytes and 12 MHz
  • IC697CPU771 is a Central Processing Unit with 12 MHz and is expandable
  • IC697CPU772 is a Central Processing Unit with floating point and 12 MHz, which can also be expanded
  • IC697CPU781 is a Central Processing Unit with 32 bits, 16 MHz, and is expandable
  • IC697CPU782 is a Central Processing Unit with floating point, 32 bits, and 16 MHz, which can also be expanded
  • IC697CPM915 is a Central Processing Unit with floating point, 32 MHz, 32 bits, and a 1-Megabyte memory
  • IC697CPM925 is a Central Processing Unit with floating point, operating at 32 bits, 64 MHz, and having a 1 Mb memory
  • IC697CPX772 is a Central Processing Unit with 96 MHz, a 32-bit system, and 512 kilobytes of memory
  • IC697CPX782 is a Central Processing Unit with a floating-point, 32-bit system, 1 Megabyte of memory, and 96 MHz
  • IC697CPX928 is a Central Processing Unit with a floating-point, 32-bit system, 6 Megabytes of memory, and 96 MHz
  • IC697CPX935 is a Central Processing Unit with a floating-point, 32-bit system, 1 Megabyte of memory, and 96 MHz
  • IC697CGR772 is a Central Processing Unit with a floating-point, 32-bit system, 512 kilobytes of memory, and 96 MHz, specially designed for applications needing CPU redundancy
  • IC697CGR935 is a Central Processing Unit with a floating-point, 32-bit system, 1 Megabyte of memory, and 96 MHz, specially designed also for applications needing CPU redundancy
  • IC697CPU788 is a Central Processing Unit that has a 32-bit expandable system and 16 MHz, specially designed for applications needing triple modular redundancy
  • IC697CPU789 is a Central Processing Unit with a 32-bit expandable system and 16 MHz, having triple modular redundancy
  • IC697CPM790 is a Central Processing Unit with a 32-bit floating-point system, 64 MHz, and 1 Megabyte of memory, specially designed for applications needing triple modular redundancy
  • IC697CPU780 is a Central Processing Unit with a 32-bit expandable floating-point system and 16 MHz, specially designed for applications needing hot stand CPU
  • IC697CSE784 is a Central Processing Unit operatable at state logics with a 32-bit system and 16 MHz
  • IC697CSE924 is a Central Processing Unit operatable at state logics with a 32-bit floating-point system and 64 MHz
  • IC697CSE925 is a Central Processing Unit operatable at state logics with a 32-bit floating system and 64 MHz

Different CPUs might have different numbers of inputs and outputs, analog I/O channels, and status LEDs, as well as a battery backup for calendar and clock, a battery backup for memory, an operation mode switch, memory protection, password access, and more.

Expansion Memory

For Series 90-70 PLC controllers, there are several CPUs whose memory can be expanded. To complement this, two types of memory expansion modules are also designed and manufactured by GE Fanuc.

  • IC697MEM713 or 715 or 717 or 719 are CMOS-based memory expansion modules. These are available in memory sizes of 64 KB, 128 KB, 256 KB, and 512 KB. These expansion modules are useful for CPU 771, CPU 772, and the PCM range of CPUs. This module doesn’t need an extra slot for its integration. This memory module can be configured for its use as data storage or program storage. Its installation process is easy, as it doesn’t require any tools. 
  • IC697MEM731 or 732 or 733 or 735 are 32-bit, CMOS-based memory expansion modules. There are four different memory sizes for these modules, which include 128 KB, 256 KB w/256 KB of non-volatile flash memory, 256 KB, and 512 KB. This expansion module works for various CPUs, including CPU 780, CPU 781, CPU 782, CPU 788, and CPU 789. Its memory gets retained on the CPU by the battery. This module can also be configured and used for program and data storage. This module can be installed easily in the field, though a ##1 Phillips screwdriver is required. Parity is generated and checking is made for every byte of SRAM (Static Random Access Memory).

PLC Racks

PLC racks are essential in the PLC control system. Several PLCs can be integrated into one rack depending on the number of slots. PLC racks IC697CHS782 and 783 accept all IC697-type PLC modules. These racks also accept plug-in power supplies with an AC/DC or DC voltage. Two racks can be powered through a single power supply. An external power supply can be attached if a power supply adapter module is also available. These racks are usable even if a high current is required for PLC operation. Fan assembly (comprising of three fans) can also be made use of if the PLCs have high power and cooling is required. Fan assemblies are designed and manufactured to comply with the vibration and shock tolerance of racks and PLC systems.

Racks are available in front and rear mounting. The number of slots could be five or nine. Anyhow, if the user is using these PLCs for applications where a high number of I/Os are needed, racks can be interconnected. Apart from the slots of a rack, the capacity of the used power supply limits the number of modules installed within a rack.

Racks standardized for IC697 modules can also be used for 3rd party VME modules.

Power Supply

This product is designed to be resilient. It can accept AC, as well as DC, power supplies. A single power supply can make two racks operational, where each rack can be connected to one power supply. During operation, it can tolerate dips in the range of 30 to 100%. Variation in AC signal could be 10% and for that of DC; 20%. (Recall EN 61000-4-11 standard in this regard).

Different power supplies for Series 90-70 controllers include:

  • IC697PWR724 or CE697PWR724 is a power supply module of 90 W and 24 VDC. This supply has three output voltages giving 5 VDC, +12 VDC, and -12 VDC for a maximum of 18 A, 1.5 A, and 1 A, respectively. This power supply has protection against overcurrent and short circuits on a 5 V bus. It can power two racks simultaneously.
  • IC697PWR748 or CE697PWR748 is a power supply module of 90 W and 48 VDC. This power supply can also provide 5 VDC (with a maximum of 18 A), +12 VDC (with a maximum of 1.5 A), -12 VDC (with a maximum of 1 A), as well as sequencing signals at logic levels for the backplane.
  • IC697PWR710 or CE697PWR712 is a power supply module of 55 W, having 125 VDC or 120/240 VAC. This power supply has a 5 VDC output at a maximum current of 11 A. On its 5 V bus, the electronic circuit is designed to provide safety against overcurrent and short circuits. At the AC inputs of the power supply, power factor correction is made.
  • IC697PWR711 or CE697PWR713 is a power supply module of 100 W with 125 VDC or 120/240 VAC. It gives three output voltages of 5 VDC (with a maximum of 20 A), +12 VDC (with a maximum of 2 A), and -12 VDC (with a maximum of 1 A), providing 100 watts accumulatively. This power supply can also power two racks. It also has a built-in safety mechanism for overcurrent and short circuits.

To bring in more flexibility, a power supply adapter module is also prepared by GE Fanuc. It has the catalog number IC697PWR720. The manufacturer has also given the option of an extension cable kit for the power supply with catalog number IC697CBL700. This extension kit enables one power supply to become attachable to more than one rack.

Backup Power

GE Fanuc equipped GE 90-70 controllers with quality Lithium batteries as well. The battery is manufactured by Matsushita Micro Battery Ind. Co. Ltd. Storage and the operating temperature ranges of the batteries vary between -40 and 85 degrees Celsius. Anyhow, the manufacturer gives its users a complete guide to using this battery safely. For example, if the battery is charged at a high amperage with a high voltage (around 5V), the top of the battery might pop up.  Apart from that, the quality of these batteries is good. They use a nontoxic solvent with a high boiling point. The solute of these batteries is also nontoxic and is a neutral acid.

Other Modules and Accessories

Apart from mentioned modules, these PLCs support coprocessor modules for their CPUs. Programmable Coprocessor Modules and Alphanumeric Display Processors are among these coprocessors.

Discrete input modules with different input power (12 VAC, 24 VAC, 48 VAC, 120 VAC, 240 VAC, 12 VDC, 24 VDC, 48 VDC, and 125 VDC), and a different number of input points (32-point, 16-point, and 14-point) are available. TTL with negative logic and 24 VDC interrupt modules are also available.

Discrete output modules are also an option with different current and voltage ratings, as well as a different number of output points (16-point and 32-point).

Analog input and output systems are also available, which could be current expander or voltage expander modules.

Apart from these, high-speed counters, state logic processor modules, bus controller modules, bus receiver modules, I/O scanners, I/O link interface modules, Ethernet controllers, Ethernet interfaces, serial communication modules, communication coprocessor modules, redundancy communication modules, and workstation interfacing modules can be used to enhance controller system capabilities.

As accessories, these PLC systems can support I/O cables, power supply extension cables, PCM to programmer cables, port isolators for RS-485, mini converter kits, interrupt jumpers having a blank slot, clamping assemblies with cable shielding, and VME option kits.

Environmental Compatibility

The suitable operating temperature for Series 90-70 controllers ranges between 0 and 60 degrees Celsius. The storage temperature for these devices varies between -40 and 85 degrees Celsius. The melting point of these products is noted to be 180 degrees Celsius. These products can be placed in locations with a humidity rating between 5 and 95%. However, there should be no condensation. To provide these products safety against dust and/or splashes of water, an IP54-rated enclosure is recommended. These controllers can bear a shock of 15G for 11ms. They can also bear vibrations having a frequency between 57 and 150 hertz, causing up to a 1G acceleration. Vibrations between 10 and 57 hertz, causing 0.012 inches of peak-to-peak displacement, are also tolerable for GE Fanuc Series 90-70 controllers.

Electromagnetic Compatibility (EMC)

GE Fanuc designed Series 90-70 controllers to comply with CISPR 11/EN 55011, CISPR 22/EN 55022, and 47 CFR 15 in case of radiated and conducted emissions. If the controller module comes CE marked, then the following standards are also applicable, which relate to EMC Immunity.

  • It is EN 61000-4-2 certified, so it is immune to electrostatic discharge within a range of 8KV through air and 4KV through contact.
  • This product is RF susceptible for 10V RMS within 80MHz to the tune of 1000MHz, and 80% AM as per EN 61000-4-3.
  • For fast transient bursts, it complies with EN 61000-4-4 making it workable with 2KV power supplies, and 1KV I/O and communication. 
  • These controllers from Series 90-70 can withstand a surge of 2.5kV from power supplies if it is a damped oscillatory wave, and an I/O surge can vary between 12 and 240V as per ANSI/IEEE C37.90a. As per the IEC255-4 standard, this product can also bear a damped oscillatory wave of Class II from power supplies. Surge limits from the I/O remain the same. In this category, EN 61000-4-5 is also an applicable standard. 
  • For conducted RF, 90-70 controllers comply with EN 61000-4-6.

Applicable Standards and Certifications

GE Fanuc manufactured Series 90-70 controllers as global products. Accordingly, these are designed to comply with various standards and certifications, so their use and installation get standardized.

  • Series 90-70 controllers comply with ISO9001 (the International Organization of Standardization) standards which pertain to its quality assurance concerning design or development, installation, production, and services. 
  • Regarding safety for Industrial Control Equipment, Series 90-70 products are UL508, C-UL, 142-M1987, or CSA22.2 certified.
  • These controllers are safe for use in hazardous locations belonging to groups A, B, C, and D from Div II of Class I. For this, controllers have certifications UL1604 with C-UL and FM3611.
  • Products from this series are CE marked to make them compatible with European EMC (Electromagnetic Compatibility) standards and Low Voltage Directives.

Browse our selection of Series 90-70 units

AutomationStop.com's online catalog offers one of the largest selections of preowned Series 90-70 units in the world.

IC697CPU732

Catalog number IC697CPU732 is a fixed floating point central processing unit (CPU) designed by GE Fanuc. This central processing unit belongs to the Series 90-70 family of products. This CPU has a 12 Megahertz microprocessor. This unit has any mix of 512 inputs and outputs. The IC697CPU732 has three (3) status LEDs. This product requires 1 ampere of current from a 5-volt bus. The IC697CPU732 features an RS-422/RS-485 serial port.

IC697CPU731

Catalog number IC697CPU731 is a single-slot PLC CPU from GE Fanuc. This product belongs to the Series 90-70 series of products. The IC697CPU731 CPU supports a maximum of 512 inputs and outputs of any mix. Additionally, this CPU supports a maximum of 8K analog I/O. This unit features three (3) status light-emitting diodes (LEDs). The IC697CPU731 requires 1.0 ampere from a 5V bus.

IC697CPM925

Catalog number IC697CPM925 is a GE Fanuc CPU for Series 90-70 programmable logic controllers (PLCs). The IC697CPM925 takes up one (1) slot when mounted, and it provides 1 MB of battery-backed memory. This device requires 3.3 amperes (nominal) from a 5V bus to operate properly. This CPU features an RS-422/RS-485 serial port.

IC697CPM924

Product number IC697CPM924 is a 32-bit floating point central processing unit (CPU). This unit was manufactured by GE Fanuc, and it is part of the Series 90-70 product line. The IC697CPM924 features a 64 Megahertz microprocessor. This CPU provides 512 kilobytes of battery-backed memory, and it has data and program memory that are fully configurable. The IC697CPM924 requires a nominal current of 3.3 amperes from a 5-volt bus. This CPU has an RS-433/485 serial port.

IC697CPM915

Product number IC697CPM915 is a CPU for Series 90-70 programmable logic controllers (PLCs). This unit was designed and produced by GE Fanuc. The IC697CPM915 is a single-slot CPU that provides 1 MB of battery-backed memory. This product supports a maximum of 8K analog I/O. The IC697CPM915 has an RS-422/485-compatible serial port. The required current from a 5-volt bus is 2.8 amperes nominal.

IC697CPM914

Part number IC697CPM914 is a GE Fanuc central processing unit (CPU) for programmable logic controllers. This CPU includes a 32 Megahertz microprocessor. The IC697CPM914 provides 512 kilobytes of battery-backed memory. This unit requires a 2.8-ampere (nominal) current from a 5-volt bus. This CPU has an RS-422/RS-485 port. The IC697CPM914 also has four (4) status LED indicators. The battery of this device retains the memory of the CPU for approximately 6 months with no applied power.

IC697CPM790

Catalog number IC697CPM790 is a central processing unit (CPU) with a 64 Megahertz microprocessor. This unit has 1 Megabyte of battery-backed memory, as well as 12K discrete input/output points. The IC697CPM790 requires a 3.3-ampere current from a 5-volt bus.

IC697CMM742

Product number IC697CMM742 is a communications module from GE Fanuc. It belongs to the Series 90-70 line of products. This module has an operating voltage rated at 5 volts DC or 12 volts DC from a PLC power supply. The IC697CMM742 has a total of four (4) LED indicators. This unit has several connector ports, including an RS-232 port, an RS-485 port, a 10BaseT port, and more.

IC697CMM711

Part number IC697CMM711, which was designed by GE Fanuc, is a Series 90-70 communications coprocessor module. This device utilizes a 12 Megahertz microprocessor. This module takes up a single slot. It has two RS-422/RS-485 or RS-232 serial ports. The IC697CMM711 has three LED status indicators. Furthermore, a battery is not required to power this module.

IC697CMM741

Product number IC697CMM741 from GE Fanuc is an Ethernet controller. This unit belongs to the Series 90-70 line of products. This device is for IC697 controllers. This unit can be installed on a PLC rack where it takes up one (1) slot. The IC697CMM741 has three (3) status LED indicators. This device allows its users to choose between 2 alternative communication protocols.

IC697CHS791

Product number IC697CHS791 is a Series 90-70 nine-slot, front mount rack. It was designed and produced by GE Fanuc. This rack requires a 0.5-ampere current from an I/O bus. The dimensions of this nine-slot rack measure 283 millimeters x 483 millimeters x 190 millimeters (height x width x depth).

IC697CHS782

Catalog number IC697CHS782 is a Series 90-70 VME integrator PLC rack. The IC697CHS782 was designed and produced by GE Fanuc. This unit has seventeen (17) slots. The maximum current rating of this device at 5 volts DC is 3.3 amperes. Additionally, the maximum current rating at 12 volts DC is 1.1 amperes. The IC697CHS782 has physical dimensions that measure 283 mm x 483 mm x 190 mm (11.15 in. x 19.00 in. x 7.5 in.).

IC697CHS783

Part number IC697CHS783 is a programmable logic controller (PLC) rack from GE Fanuc. This device belongs to the Series 90-70 family of products. This rack has a total of seventeen (17) slots. The maximum current rating of the IC697CHS783 is 3.3 amperes at 5 volts DC and 1.1 amperes at 12 volts DC. This PLC rack has dimensions that measure 283 millimeters x 483 millimeters x 190 millimeters (height x width x depth).

IC697CHS790

Catalog number IC697CHS790 from GE Fanuc is a PLC rack with nine (9) slots. This unit is rear mountable. The IC697CHS790 requires a current of 0.5 amperes from an I/O bus. The dimensions of this PLC rack measure approximately 283 mm x 483 mm x 190 mm (height x width x depth).

IC697CHS750

Catalog number IC697CHS750 is a GE Fanuc five-slot, rear mount PLC rack. This unit belongs to the Series 90-70 product family. The IC697CHS750 PLC rack requires a current of 0.5 amperes from an I/O bus to work properly. The physical dimensions of this rack measure 283 mm x 320 mm x 190 mm (height x width x depth).

IC697CBL700

Part number IC697CBL700 is a power supply extension cable from GE Fanuc. This product allows two (2) racks to operate from one (1) power supply. This cable includes a 5-volt power signal, as well as a control signal. The IC697CBL700 cable utilizes a D-type connector with nine (9) pins.

IC697CGR772

Product number IC697CGR772 is a GE Fanuc central processing unit (CPU) for PLCs. This unit includes a 96 Megahertz microprocessor, and it only takes up one (1) slot. Floating point calculations are supported by this CPU. It also supports up to 2048 outputs and 2048 inputs, as well as up to 8K analog I/O. The IC697CGR772 requires a nominal current of 3.1 amperes from a 5-volt bus.

IC697CGR935

Part number IC697CGR935 is a Series 90-70 CPU for programmable logic controllers (PLCs). It was designed and produced by GE Fanuc. The IC697CGR935 is a single-slot CPU with a 96 MHz microprocessor. The IC697CGR935 CPU requires a nominal current of 3.1 amperes for a 5V bus.

IC697BEM761

The IC697BEM761 from GE Fanuc is an I/O interface module for IC600 programmable logic controllers (PLCs). This unit belongs to the Series 90-70 product family. The IC697BEM761 is typically used to interface an IC697 I/O module to an IC600 PLC I/O bus. This unit supports a maximum of eight (8) racks per I/O system.

IC697BEM763

Part number IC697BEM763 is a DLAN interface module from GE Fanuc. This module belongs to the Series 90-70 product line. This unit features a 12 Megahertz microprocessor. The IC697BEM763 has a restart pushbutton, a DLAN network connector, and three (3) LED status indicators. The battery of this module can help retain the memory of this device for approximately two (2) years when there is no power applied to it.

IC697BEM764

Catalog number IC697BEM764 is a Series 90-70 VME DLAN interface module. It was designed and produced by GE Fanuc. This module features a 12 Megahertz 80C186 microprocessor, a restart push button, and three (3) status LED indicators. The IC697BEM764's battery has an estimated shelf life of ten years at 68 degrees Fahrenheit. In addition, this interface module's memory retention is two years when there is no power applied to the battery.

IC697BEM733

The IC697BEM733 remote I/O scanner can be kept a maximum of 7500 feet away from the controller. This unit can handle a maximum of 128 bytes of inputs, as well as 128 bytes of outputs, per remote drop. The IC697BEM733 has one (1) RS-422/485 serial port, as well as one IC66 handheld monitor port.

IC697BEM742

Manufactured by GE Fanuc, the IC697BEM742 FIP bus controller enables connections between FIP I/O serial bus devices and IC697 programmable logic controllers (PLCs). This unit is a dual channel device belonging to the Series 90-70 product series. This unit has an available memory of 2 Megabytes of RAM and 2 Megabytes of flash memory. The IC697BEM742 has a data rate of 1 Megabit per second. This device has a total of six (6) status LED indicators.

IC697BEM713

The GE Fanuc IC697BEM713 is a bus transmitter module. This device is part of the Series 90-70 line of products. The IC697BEM713 supports a maximum of seven (7) expansion racks. Additionally, this product includes three (3) LED status indicators. The IC697BEM713 requires a current rating of 1.4 amperes from a 5-volt bus.

IC697BEM731

Product number IC697BEM731 is a bus expansion module from GE Fanuc. This product belongs to the Series 90-70 line of products. The IC697BEM731 is a single-channel controller. This unit supports redundant blocks, cables, and CPUs. The IC697BEM731 has global communications and a handheld monitor port. This module requires a 1.3-ampere current from a 5-volt bus.

IC697ALG444

Part number IC697ALG444 from GE Fanuc is a Series 90-70 analog input current expansion module. The IC697ALG444 has a total of sixteen input channels. This device has gold-plated contacts on both of the headers, as well as the terminal blocks. The input voltage of this product ranges from -10 volts to +10 volts. In addition, the input current ranges from 4 to 20 milliamperes.

IC697BEM711

Catalog number IC697BEM711 is a Series 90-70 bus expansion module from GE Fanuc. This module features a high-speed parallel bus expansion interface, as well as three (3) LED indicators. The IC697BEM711 supports a maximum of seven (7) expansion racks. This unit requires a 0.8-ampere current from a 5-volt bus.

IC697ALG321

Part number IC697ALG321 is a Series 90-70 analog input module that was produced by GE Fanuc. This module has four (4) input channels with an input voltage ranging from -10 volts to 10 volts. The conversion rate of the IC697ALG321 is 2 milliseconds. This product has a 16-bit resolution, as well as a 250-ohm input impedance rating. The power requirement of the IC697ALG321 is 112 milliamperes at 5 volts. The approximate weight of this GE Fanuc product is 4 pounds.

IC697ALG440

Catalog number IC697ALG440 is an analog input expander module. This unit is part of the Series 90-70 line of products. The IC697ALG440 has an input voltage range of -10 volts to +10 volts, as well as an input current range of 4 milliamperes to 20 milliamperes. This module has a default resolution of 16 bits. The IC697ALG440 has a total of sixteen (16) input channels.

IC697ALG441

Catalog number IC697ALG441 is an analog input expander module. This unit is a product of GE Fanuc and belongs to the Series 90-70 line of products. The input ranges of the IC697ALG441 include -10 to 10 volts and 4 to 20 milliamperes. This module has a 16-bit resolution. The IC697ALG441 features eight (8) differential inputs that are individually configured for voltages and currents.

IC697ACC744

Manufactured by GE Fanuc, product number IC697ACC744 is a rack fan assembly. This assembly consists of three (3) cooling fans. The IC697ACC744 operates via a voltage rated at 24 volts DC. Additionally, the input power required for the fans to operate is rated at 6.7 watts. The IC697ACC744 has an approximate weight of 5.94 pounds.

IC697ADC701

Part number IC697ADC701 is a Series 90-70 alphanumeric display coprocessor module. This device was manufactured by GE Fanuc. The IC697ADC701 has a 12 Megahertz 80C186 microprocessor. This ADC module features an RS-232 serial port, as well as an RS-422/RS-485 serial port. The current required by this module from a 5-volt bus is 1.0 ampere.

IC697ALG230

Part number IC697ALG230 is a GE Fanuc base converter module. This unit belongs to the Series 90-70 product series. The IC697ALG230 has eight (8) differential inputs that may be configured individually. This module accepts current loop signals rated at 4 to 20 milliamperes.

IC697ALG320

The GE Fanuc IC697ALG320 high-level analog output module is part of the Series 90-70 product series. This device provides current loop signals ranging from 0 to 22.5 milliamperes. The IC697ALG320 has a fast update rate, in addition to individual user scaling for each of its four (4) output channels. This unit does not require the use of jumpers or DIP switches to be configured.

IC697ACC644

Manufactured by GE Fanuc, part number IC697ACC644 is a Series 90-70 rack fan assembly. This unit consists of two (2) cooling fans. These fans operate via a voltage rated at 24 volts DC. Additionally, each fan requires an input power rated at 6.7 watts. The IC697ACC644 is generally used to cool down machines and prevent overheating.

IC697ACC701

Part number IC697ACC701 is a lithium battery from GE Fanuc. This battery is typically used to maintain the CPU's calendar clock, as well as the user memory when/if power is removed. The estimated lifespan of the IC697ACC701 is 10 years at a temperature of 20 degrees Celsius.

IC697ACC702

Part number IC697ACC702 is an I/O bus terminator plug. This unit was produced by GE Fanuc as part of the Series 90-70 family of products. The IC697ACC702 has a 25-pin male connector. This product is compatible with a variety of Series 90-70 programmable logic controllers (PLCs). The approximate weight of the IC697ACC702 is 0.04 kilograms.

IC697ACC721

Part number IC697ACC721 is a rack fan assembly from GE Fanuc. This fan assembly has a total of three (3) fans. The operating voltage of the IC697ACC721 is 120 volts AC, and the input power is rated at 15 to 17 watts. The line current of this fan assembly ranges from 0.18 amperes to 0.2 amperes. Additionally, the locked rotor current ranges from 0.24 amperes to 0.26 amperes.

IC697ACC724

Produced by GE Fanuc, part number IC697ACC724 is a rack fan assembly. This device is part of the Series 90-70 line of products. This assembly has a total of three (3) fans. The IC697ACC724 operates via a voltage rated at 240 volts AC, along with an input power rated at 16 to 17 watts. The IC697ACC724's line current ranges from 0.09 to 0.10 amperes, and its locked rotor current ranges from 0.12 to 0.14 amperes.

44A749939-001

Part number 44A749939-001 is a parallel I/O module from GE Fanuc's Series Six product series. This module is used for PACSystem RX7i and Series 90-70 products. The 44A749939-001 supports a maximum of eight (8) channels. The dielectric isolation rating of this product is 1500 volts.

IC697ACC621

Product number IC697ACC621 is a rack fan assembly from GE Fanuc. This assembly is made up of two (2) fans. The IC697ACC621 also includes filters. This fan assembly is powered via a 120 VAC voltage at 50 to 60 hertz. Each fan of this assembly requires an input power rated at 15 to 20 watts.
Previous 1 2

Next

Displaying 41 of 91 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP