GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Emerson - GE Fanuc

Series 90-30

GE Automation introduced the Ge Fanuc 90-30 series of programmable logic controllers. Emerson Automation currently owns the former Ge Automation. This product line provides industrial components that can be used in various applications. For example, its analog modules are used in the processes such as flow, temperature, and pressure. Similarly, the baseplates are offered in either 5 or 10 slot widths to accommodate the industrial needs of users for flexible configuration. Users can choose from a wide range of expansion and remote base plates for multi-rack systems. Likewise, it offers CPU modules for general purpose applications; these are appropriate for low I/O counts and embedded in the baseplates to improve slot availability. In addition, the 90-30 product family includes discrete I/O modules that serve as interfaces between the PLC and external input devices such as proximity sensors, pushbuttons, switches, and BCD thumbwheels, among others. Furthermore, the series includes motion control units that can be easily applied in various digital, analog, and stepper motion applications for high-speed counting; these units are also suitable for point-to-point applications. It provides power supply modules, which users can snap in similarly to I/O devices and are compatible with CPUs. Most of these power supply units have default auto-ranging functionalities, so users do not need to use external jumpers for incoming power levels. These can also provide current limiting features to enhance the control systems' safety. The manufacturers test these components to meet international industrial standards and last longer mechanical lifespans. However, users should follow the manufacturer's guidelines for mounting and troubleshooting.

Series 90-30 Selection Guide

The Series 90-30 PLCs from GE Fanuc are a collection of controllers, input/output systems, and specialty modules. This family meets the demand for extremely flexible industrial automation. Automation integration is made simple by the diversity and flexibility of input/output and specialty modules.

The Series 90-30 PLCs, with their novel architecture and modular design, provide a low-cost solution to a surprisingly wide variety of PLC applications, from simple relay replacement to complicated industrial processes and discrete automation.

This family offers 14 robust processors, 100+ distinct I/O module types, intelligent modules, high-level communications solutions, and bus interfaces.

This article will discuss the Series 90-30 series of products in detail. That will help you choose the best CPU and other modules per your system requirements.

Series 90-30 CPUs

The CPU is the main part of any PLC system. The Series 90-30 product line offers 14 CPU models with different features. It allows you to choose the best processing unit according to your system design. These CPU models are categorized into the following categories.

Embedded CPUs

These CPUs are soldered to the baseplate backplane. This family offers three embedded CPUs models: CPU311, CPU313, and CPU323.

The basic features of these CPUs include:

  • They are irreplaceable as they are soldered to the baseplate's backplane board.
  • These CPUs do not permit the usage of Expansion or Remote racks. This implies that if your application needs more than ten modules, you must choose a modular CPU.
  • All slots on the baseplates are useable for input/output or option modules.
  • In these CPUs, power supply modules also contain the memory backup battery. Unplugging the power supply will also disconnect the battery from the memory circuits on the backplane circuit board. However, the supercapacitor in the backplane circuit may retain adequate power to keep the memory circuits operational for a limited amount of time.
  • They don't contain a TOD (time-of-day) clock.

Modular CPUs

The processor, storage unit, and other integrated circuit chips are soldered onto the circuit board in modular CPUs. This board is installed in a plug-in module. This family includes the CPU331 and above models. The CPU350-370 are high-performance CPUs that offer additional features, fast processing speed, and increased memory.

The basic features of these CPUs include:

  • Only a CPU module or a specific optional module can be inserted in slot 1 of the baseplate in these CPUs.
  • These CPUs support expansion and remote baseplates.
  • This CPU can be easily swapped or upgraded to a new type.
  • Only one CPU is permitted in any system.
  • They offer a TOD (time-of-day) clock.
  • CPU350-370 supports floating-point math. These CPUs come with flash memory, key switch, and sequential event recorder.

General Features of CPUs

Some of the general features of embedded and modular CPUs models are discussed in this section.

Microprocessor

The CPU model determines the microprocessor type as shown below.

  • Microprocessor: 80188
    • CPU Model: CPU311, CPU313, CPU323, CPU331
  • Microprocessor: 80C188XL
    • CPU Model: CPU340, CPU341
  • Microprocessor: 80386EX
    • CPU Model: CPU350-364
  • Microprocessor: 586
    • CPU Model: CPU374

Built-in Serial Ports and Communications

All Series 90-30 CPUs, except for the CPU374, have one built-in serial port that is RS-485 compatible. Series 90 slave protocols, such as SNP and SNP-X, are supported by this port. This serial port in CPUs 331-364 can also support the PCM module for RTU master and CMM module for SNP master protocol, SNPX master protocol, CCM protocol, or RTU slave protocol.

CPU351, CPU352, and CPU363 come with two additional serial ports. The top port (port 1) has a 6-pin RJ-11 female connector that supports the RS-232 protocol, and the bottom port (port 2) is RS-485 compatible.

These additional serial port connectors are located on the front of the CPU. These serial ports improve the system performance by avoiding the CPU connection with serial ports through the PLC backplane. These CPUs allow you to create custom serial output. These ports can support SNP /SNP-X master and slave protocols. These also support the RTU slave protocol and the serial feature.

Memory

All CPUs from this series support CMOS RAM as working memory. CMOS RAM is a low-power, fast memory that is easily readable and writeable. In a modular CPU, a RAM chip is installed within the CPU module. In an embedded CPU, the backplane board has the RAM chip.

These CPUs support three types of PROM (Programmable Read-Only Memory) devices, including EPROM, EEPROM, and flash memory to store user data and CPU firmware.

  • CPU Model: CPU311, CPU313, CPU323, CPU331
    • Memory Storage: RAM and optional EEPROM or EEPROM
  • CPU Model: CPU340
    • Memory Storage: RAM and optional Flash
  • CPU Model: CPU 341
    • Memory Storage: RAM and optional EEPROM or EEPROM; RAM and optional Flash
  • CPU Model: CPU350, CPU351, CPU352, CPU360, CPU363, CPU364, CPU374
    • Memory Storage: RAM and Flash

Some general features of Series 90-30 CPUs include the speed (MHz), the number of input/output (I/O) points, the option of a battery-backed clock, the maximum user Logic memory, and much more.

Electrical Specifications

The electrical specifications of all CPU models include:

  • CPU Model CPU311 has an operating voltage rated at +5 volts DC and an operating current rated at 410 milliamperes.
  • CPU Models CPU313 and CPU323 have an operating voltage rated at +5 volts DC and an operating current rated at 430 milliamperes.
  • CPU Model CPU331 has an operating voltage rated at +5 volts DC and an operating current rated at 350 milliamperes.
  • CPU Models CPU340 and CPU341 have an operating voltage rated at +5 volts DC and an operating current rated at 490 milliamperes.
  • CPU Models CPU311 and CPU360 have an operating voltage rated at +5 volts DC and an operating current rated at 670 milliamperes.
  • CPU Models CPU351, CPU352, and CPU363 have an operating voltage rated at +5 volts DC and an operating current rated at 890 milliamperes.
  • CPU Model CPU364 has an operating voltage rated at +5 volts DC and an operating current rated at 1.51 amperes.
  • CPU Model CPU374 has an operating voltage rated at +5 volts DC and an operating current rated at 7.4 Watts.

Communication Options

The Series 90-30 product line supports several communication protocols, including Ethernet, Series 90 Protocol (SNP), CCM, Genius, and RTU.

Baseplates

The baseplate holds most of the components. The PLC system is built around these baseplates. Every PLC system includes at least one baseplate, which commonly houses the CPU. Depending on the number of modules they can carry, these baseplates are categorized as either 5-slot baseplates or 10-slot baseplates.

  • CPU Model: CPU311 and CPU313
    • Baseplate Description: 5-slotbaseplate with an embedded CPU
  • CPU Model: CPU323
    • Baseplate Description: 10-slot baseplate with an embedded CPU
  • CPU Model: CPU331, CPU340, and CPU341
    • Baseplate Description: 5 baseplates per system -> 1 CPU baseplate and 4 expansion plus remote baseplates
  • CPU Model: CPU350, CPU351, CPU352, CPU360, CPU363, CPU364, and CPU374
    • Baseplate Description: 8 baseplates per system -> 1 CPU baseplate and 7 expansion plus remote baseplates

Power Supplies

Each base plate requires its power source. The power supply is always installed in the left-most slot on a baseplate. A range of power supply types is available to fulfill the power needs of the series 90-30 PLC system. Power supplies that are compatible with Series 90-30 products include an AC/DC input power supply and a DC input-only power supply. These power supplies are equipped with LED (light-emitting diode) indicators. The purpose of these LED indicators is listed below.

  • LED Label: PWR
    • Description: Top green LED
    • Purpose: Indicates the operating state of the power supply. When ON, there is a correct source of power to the power supply. When OFF, power is not being applied and there could be a power supply fault.
  • LED Label: OK
    • Description: Green LED
    • Purpose: Indicates whether the PLC is operating properly or not. When ON, the PLC is working properly. When OFF, there has been a problem detected by the PLC.
  • LED Label: RUN
    • Description: Green LED
    • Purpose: When ON, the PLC is in run mode
  • LED Label: BATT
    • Description: Bottom Red LED
    • Purpose: When ONm the memory backup battery voltage is insufficient to keep the memory alive in the event of a power outage.

Input/Output Modules

The Series 90-30 product line offers the following input/output modules and specialty modules.

Discrete Input Modules

The Series 90-30 line of products offer discrete input modules that translate the user devices' AC/DC power levels to PLC logic levels. An optical coupler isolates the incoming power from the logic circuit. These input modules come with 8, 16, or 32 points (circuits), such as the IC693MDL230, which is a 120 volts AC discrete input module with 8 points.

Discrete Output Modules

The Series 90-30 series of products offer discrete output modules that transform the PLC logic levels into the AC/DC power levels needed to operate the user devices. Each output point is switched using a power semiconductor or an electromagnetic relay.

These discrete output semiconductor-switched modules come with 5, 8, 12, 16, or 32 output circuits (points). This series offers relay output modules that have 8 or 16 normally open (NO) relay contact outputs.

Discrete Input/Output Combination Modules

Combination discrete I/O modules combine inputs and outputs in a single module. It can be an input/output combination of AC/relay or DC/relay. The IC693MAR590 and IC693MDR390 modules have 8 input points (AC or DC) and 8 output points (relay).

Analog Input Modules

Analog input modules perform the analog-to-digital conversion. These modules are available in four combinations:

  • 4-channel current module (IC693ALG221)
  • 4-channel voltage module (IC693ALG220)
  • High-density current input module with 16 channels (IC693ALG223)
  • High-density voltage input module with 16 channels (IC693ALG222)

Analog Output Modules

Analog input modules perform the digital-to-analog conversion. These modules are available in three combinations:

  • 2-channel current module (IC693ALG391)
  • 2-channel voltage module (IC693ALG390)
  • 8-channel high-density current/voltage input module (IC693ALG392)

Analog Combination Modules

These series combine the features of the analog input module and analog output module into a single module, known as an analog combination module. The IC693ALG442 module offers two D/A output channels and four A/D input channels.

Optional Modules

This series is compatible with a wide range of specialty modules. That equips you with the freedom to choose the optional modules following your system requirements.

Optional modules with their functions are summarized below.

  • Genius Communications Module - IC693CMM301 - Allows communication between Series 90-30 PLCs and other GE Fanuc PLCs
  • Enhanced Genius Communications Module - IC693CMM302 - Enables autonomous global data communications among a Series 90-30 PLCs and a maximum of 31 additional devices connected to a Genius bus
  • Genius Bus Controller - IC693BEM331 - Supports the interface between a genius I/O bus and Series 90-30 PLCs
  • FIP Bus Controller - IC693BEM340 - Supports the Series 90-30 PLCs interface with FIP I/O serial bus
  •  FIP Remote I/O Scanner - IC693BEM330 - Supports the Series 90-30 PLCs interface with FIP I/O serial bus
  •  Motion Mate Axis Positioning Module - IC693APU301/302 - Combine PLC logic solving functions with one-axis control
  •  Motion Mate Digital Servo Module - IC693DSM302; IC693DSM314 - Combine PLC logic solving functions with two-axis control
  •  High-Speed Counter Module - IC693APU300 - High-speed processing of signals of 80KHz maximum
  •  I/O Link Interface Module - IC693BEM320 - Supports connection between Series 90-30 PLCs and Series 90-70 PLCs, as well as Series 90-30 PLCs (slaves) and Fanuc I/O LINK
  •  I/O Link Master Module - IC693BEM321 - Supports connection between series 90-30 PLC (master) and a maximum of 16 slaves on Fanuc I/O LINK
  •  I/O Processor Module - IC693APU305 - Direct Processing of rapid pulse signals
  •  Ethernet Interface Module - IC693CMM321 - Support attachment of Ethernet LAN
  •  Programmable Coprocessor Module - IC693PCM300/301/311 - Allows communication with programming terminals, RTU master devices, printers, etc.
  •  Communications Control Module - IC693CMM311 - High-performance coprocessor for modular CPUs
  •  Temperature Control Module - IC693TCM302 - Supports temperature control of a maximum of 8 channels
  •  Power Transducer Module (PTM) - IC693PTM100 - Monitor voltages or measure power consumption

State Logic CPUs

The Series 90-30 product line offers five state logic CPUs that use Natural Language Processing technology. It helps to manage large applications by breaking them into smaller and manageable tasks and steps.

  • State Logic CPU: IC693CSE311 and IC693CSE313
    • Description: 5-slot baseplate with an embedded CPU
  • State Logic CPU: IC693CSE323
    • Description: 10-slot baseplate with an embedded CPU
  • State Logic CPU: IC693CSE331 and IC693CSE340
    • Description: single slot CPU module

Remarks

Follow these steps while designing your Series 90-30 PLC system:

  1. Make a detailed plan of your system.
  2. Determine the number and type of inputs and outputs.
  3. Select optional modules to meet your system requirements.
  4. Select a suitable CPU and baseplate that can accommodate the module selected above.
  5. Choose a power supply.

Browse our selection of Series 90-30 units

AutomationStop.com's online catalog offers one of the largest selections of preowned Series 90-30 units in the world.

IC693MDL632

Ge Fanuc Automation's IC693MDL632 is a PLC 90-30 digital input module. The unit is a +/- module with a 125 VDC rated voltage and eight isolated input channels/points divided into two groups. Each input group has commons that are unconnected. This unit can be used after installing into a 5 or 10 slot I/O baseplate.

IC693MDL634

The IC693MDL634 is a PLC 90-30 logic input module by Ge Automation. It is a positive/ negative input module with a single group of eight input points and a single common power input terminal. Its design enables the use of both negative and positive logic parts. It has an input voltage range of 0 to 30 VDC and an average input current rating of 7 mA at the rated voltage.

IC693MDL330

The IC693MDL330 is an output module from Ge Fanuc's 90-30 PLC platform. It runs on 120 to 240 VAC and can draw a current rating of 2 amps. It has two isolated groups of four output points for eight output points and an output voltage of 85 to 264 VAC, 20 amps maximum inrush current (per cycle).

IC693MDL340

IC693MDL340 is a discrete input module designed by GE Fanuc and belongs to the 90-30 Series. It has 16 output channels divided between two groups. Each group contains 8 output channels (120 VAC). The unit has 85-132 Volts AC output voltage and 50-60 Hertz frequency range, and its output current range is 0.5 amperes per point. In addition, its isolation voltage range is 1500 Volts between the field and logic sides.

IC693MDL350

The IC693MDL350 is an output module from the PLC-90-30 family. It operates on a 120-240 VAC power supply and has 16 isolated output points. Its output voltage is 74-265 VA and has a frequency range of 50 to 60 Hz, a maximum inrush current rating of 20 amps, and a minimum load current per 10 mA. The field to isolation voltage range is 250 V AC continuous and 1500 VAC for one minute.

IC693MDL310

The output module IC693MDL310 contains 12 output points that are evenly spread into two groups. Six points are assigned to each category. It's compatible with PLC's 90-30 product line. It has a 120 VAC operating voltage and a 0.5 amp current rating. Within the module, each of the two groups has its own common protection. Each kind can be employed at different stages of the power supply's operation thanks to this output module.

IC693MDL260

The IC693MDL260 input module is a Series 90-30 PLCs platform component. It operates on 120 volts AC, has 32 isolated input points organized into four distinct groups of eight points each, and has an input current of 12 mA at the rated voltage. Although each group is isolated, all inputs share a single common connection. It also supports 32 LED status indicators. However, this input module does not support DC power.

IC693MDL250

The IC693MDL250 module is a series 90-30 PLC isolated input module. It operates at 120 VAC, 50/60 Hertz. It has 16 remote input ports typically supplied by separate AC supply phases but can potentially be powered by a single power source. The input current rating of this unit is 14.5 mA This unit also has an RC snubber, which protects each input from transient electrical interference from the power line.

IC693MDL231

The isolated input module IC693MDL231 is part of the 90-30 product line. This device operates on 240 VAC and has 8 isolated input points as well as a single power input terminal. Moreover, it has input properties that make it ideal for use with a variety of input devices that this module can control due to its input functionality. This unit has a frequency range of 50 to 60 Hertz and an input current of 15 mA at rated voltage.

IC693MDL240

The IC693MDL240 is a product type of a standard discrete input module manufactured by Ge Fanuc. It is part of the 90-30 platform that features modules for the PLCs. The input module has 16 input channels with a 0-132 VAC input signal range, and its nominal input voltage ranges from 0-120 VAC. Its input current range is 12 mA per channel, and its frequency range is 50-60 Hz.

IC693MDL241

Emerson Automation’s IC693MDL241 is a Discrete input module from the 90-30 series. It has 16 input channels, grouped into two. Each can accept 0 to 30 Volts DC or 0 to 30 Volts AC at seven mA at rated voltage and 50 to 60 Hz frequency. This unit's nominal output voltage range is 24 Volts AC or 24 Volts DC. The unit supports binary field devices such as proximity switches, limit switches, pushbuttons, and other such devices.

IC693MCM001

The IC693MCM001 is a PLC 90-30 digital servo interface module from GE Fanuc. This servo PLC device can also be used as a power mate J interface module. Non-volatile flash storage is included. It processes blocks at a pace of less than 5. There are 16 inputs. It complies with EN 61000-4-2 and should be housed in a metal enclosure with metal-to-metal connections surrounding the entrance for additional safety.

IC693MDL230

The Ge Fanuc IC693MDL230 is an isolated input module featured in the 90-30 PLC product lineup. The unit has eight inputs and supports a common power input terminal for all of them. It draws 14.5 mA at 120 Volts AC rated voltage, and its frequency range is 50/60 Hertz. This unit features 8 LED indicators. It is interoperable with binary field devices and can also provide support to them.

IC693MAR590

The Ge Fanuc IC693MAR590 is an input relay output module with a 120 Volt AC input voltage. It belongs to the 90-30 PLC series. It has eight input channels and eight output channels. The module is compatible with PLC components ranging from 90 to 30 and includes grouped inputs and two groups of output points. It includes features like load device control, LEDs, circuit wiring and identifying control, and support for a 5-slot or 10-slot baseplate.

IC693DSM324

The IC693DSM324 is a motion controller module that belongs to the PLC 90-30 product line and is also compatible with PACSystems RX3i devices. It applies to the highly complicated motion control systems in industrial automation. The power consumption of this unit is 860 mA at 5 Volts DC, and its mounting location is through the main rack, expansion remote baseplate.

IC693DSM314

The IC693DSM314 is a motion controller from the series 90-30 manufactured by Ge Fanuc. It supports analog and digital modes and comes with four axes, and it also supports torque mode, has a 0.5 milliseconds velocity loop, and takes less than 5 ms of block processing time. It consumes 450 milliAmps at 5 Volts DC (typical) backplane current.

IC693DSM302

The IC693DSM302 motion controller is part of the 90-30 PLC range of products. It is designed to extend the functionality of programmable logic controllers (PLCs). The unit includes two axes and an RS-232 port for firmware updates. At 5 volts DC, its internal power consumption is 450 milliamps.

IC693DNS201

The IC693DNS201 by Ge Fanuc Automation is a DeviceNet communication module. It is part of the PLC 90-30 platform and compatible with PACSystems RX3i modules. It operates on DeviceNet's slave mode as a network server and can use the RS-232 serial port that upgrades firmware. Its maximum I/O data transfer rate is 255 bytes. The module has an input voltage rating of 5 Volts DC, and its current rating is 450 mA.

IC693DNM200

The GE Fanuc’s IC693DNM200 is a single slot DeviceNet master module designed for 90-30’s PLC modules. It is compatible with series 90-30, PACSystems RX3i, and is used for messaging and data transferring applications. The single-slot master module can support 125K, 250K, and 500K Baud data rates and has a rated voltage rating of 12 to 24 Volts DC, positive logic, and a backplane current draw of 450mA at 5 Volts DC.

IC693CPU374

The IC693CPU374 is a GE Fanuc processor module from PLC 90-30 Series used to host user programs and manage data exchanges. It consumes 7.4 Watts power at a 5 Volts DC supply. Additionally, I\it has an embedded 586 processor model with a 133 MHz processor speed, 2048 I/O points, and 240 KB register memory and a single-slot CPU module with an embedded ethernet interface.

IC693CPU372

Ge Fanuc’s IC693CPU372 is a single slot CPU module with an ethernet interface. It is part of the 90-30 PLC series and also compatible with the VersaMax PLCs and PACSystems. It comes with an AMD SC520 processor that has a 133 MHz speed. In addition, it supports floating-point math and shift register and is also expandable. It has 2048 discrete I/O, and it can support up to three interlinked ethernet modules.

IC693CPU370

The IC693CPU370 is a PLC 90-30 CPU module with an RS-485 port on the power supply but no serial ports. It requires 7.4 Watts of power at 5 VDC and can run for more than a month on the backup battery if the power goes out. Moreover, it is designed for 32-bit platforms and accepts either RAM or flash memory for storage.

IC693CPU367

The IC693CPU367 is a CPU module made by Ge Automation, a part of the PLC 90-30 Bulletin. This model can support floating point math, unlike many other units in the same series. Also, it supports RS-232 serial interface for firmware upgrades. This unit supports multiple data rates and has a backplane current of 940 mA @ 5 Volts DC. It works with the 10.72 CPU model, and the device requires version 5.0 or later configuration software.

IC693CPU366

Ge Fanuc IC693CPU366 is a CPU module with a Profibus master device from the PLC 90-30 product family. The CPU can send and receive data from Profibus networks thanks to the embedded Profibus master device. This module uses a  9-pin female RS-485 port to connect to the Profibus networks. Its input voltage is 5 Volts DC and can draw 940 mA.

IC693CPU364

Ge Fanuc’s IC693CPU364 is a controller module that belongs to the 90-30 platform. This controller supports the RS-485 serial port, and it is also compatible with both RAM and flash memory storage. The CPU type compatible with this controller is single-ended with embedded ethernet capabilities. In addition, it supports an 80386EX microprocessor, 244 KB user memory, 240 register memory, and 25 MHz processor speed. The module has a power range of 1.51 amperes from +5 Volts DC supply.

IC693CPU363

The IC693CPU363 is a single slot CPU processor module from the 90-30 platform designed by GE Fanuc for the PLC modules. The power range of this unit is 890 amperes from +5 Volts DC supply, and it supports three serial ports, 2048 discrete inputs, and 2048 discrete outputs. Its supported microprocessor is 80386EX, and it has a clock speed of 25 MHz. The primary job of this unit is to execute user programs from the user memory.

IC693CPU360

The IC693CPU360 is a single slot width CPU processor module designed and distributed by GE Fanuc and presented in its intelligent 90-30 product lineup, mainly for the PLC modules. Its processor speed is 25 MHz, and its scan time rate is only 0.22 ms per 1K boolean logic contacts. The module can support 240K Bytes user memory, and its processor type is 80386EX. The power range of this unit is 670 mA from +5 Volts DC.

IC693CPU352

The IC693CPU352 is a modular CPU unit from 90-30 PLC Bulletin, manufactured by Ge Fanuc. Its input voltage range is 5 Volts DC and has 7 baseplate expansions and 7 remote input/ output baseplates. Its current rating is 910 mA, 2048 discrete I/O points, and 240 KB of user memory. Additionally, it comes with the 80386EX with a 25 Megahertz clock/processor speed.

IC693CPU351

The GE Fanuc IC693CPU351 is a single slot CPU module from the 90-30 PLC series. It has an 80386EX processor with a processor speed of 25MHz and 240 KB of user memory. This CPU module also has 2048 discrete I/O points. This unit's standard operating temperature range is 0 to 60 ℃.

IC693CPU350

The GE Fanuc’s IC693CPU350 is a CPU processor module that belongs to the 90-30 product line. It supports a single slot CPU module and an 80386EX processor type. It can also support RAM and Flash for storage memory. Its input voltage range is 5 VDC, and its input current range is 670 mA. This module has a clock speed of 25 MHz and a user memory of 32 KB. Its standard operating temperature is 0-60 degrees celsius.

IC693CPU341

The Emerson Automation IC693CPU341 is a single-slot CPU module from the programmable logic controllers (PLC 90-30 Series). It comes with an 80188 processor type that has a 20 MHz clock speed and 0.3 ms per 1K of Boolean logic scan rate. Additionally, it has 80 kilobytes of user memory, 9999 (words) register memory and 512 discrete input points. Its current consumption is 490 mA, at 5 VDC.

IC693CPU340

Ge Automation's IC693CPU340 is a PLC 90-30 CPU module. It has an 80C188XL microprocessor with a clock speed of 20 MHz. It has 19.9 Kb of register memory and 32 Kb of user program memory. Furthermore, this unit has 512 I/O points but does not support floating math points. This CPU module draws 490 milliamps at 5 Volts DC power supply.

IC693CPU331

Ge Fanuc’s IC693CPU331 is a modular CPU module with a single slot. It is part of the 90-20 product line and is compatible with the GE Fanuc programmable logic controllers (PLCs). This module has 5 Volts DC bus voltage, and it can draw a 350 mA current rating. Its 80188 processor has a speed of 10 MHz. Additionally, it has 512 discrete I/O points and supports shift registers.

IC693CPU323

The IC693CPU323 is a 10-slot embedded CPU baseplate module designed by Ge Fanuc, part of its 90-30 platform for programmable logic controllers (PLCs). It supports a single power supply slot, 10 I/O slots, one serial port, 12 KB user memory, 320 discrete I/Os, and 340 times/counters. Its input voltage rating is 5 Volts DC and can load 430 milliamps current.

IC693CPU321

The IC693CPU321 is a PLC 90-30 baseplate module designed by Ge Automation to offer a reasonable installation solution for the PLCs. The baseplate has 5.0 Volts DC operating voltage and 430 milliamps current rating. It has an I/O capacity of 320 discrete I/O(s) or 64 analog inputs and 32 output points. This baseplate also features a type D 15 pins RS-485 Port.

IC693CPU313

Ge Fanuc’s IC693CPU313 is a 5-slot embedded CPU baseplate module that belongs to the PLC 90-30 platform. This baseplate is designed to accommodate non CPU and I/O slots and power supply slots. In addition, it provides 64 words for analog inputs and 32 for the analog output and comes with a turbo CPU unit with an 80188 processor and 10 MHz speed.

IC693CPU311

The IC693CPU311 is Emerson Automation’s embedded CPU baseplate module from the 90-30 PLCs product line. It comes with a 5 slot baseplate and an 80188 CPU with a clock speed of 10 MHz, with a Boolean execution time of 18 milliseconds per 1K logic. Additionally, it has 6 kilobytes of user program memory and a single serial port. This CPU baseplate has 5 Volts DC bus voltage rating and a 410 milliamps current rating.

IC693CMMAAUI

The IC693CMMAAUI cable is a GE IC693CMM321 ethernet module transceiver cable. It provides an interface through which users can connect their 90-30 PLCs to an ethernet network using an external transceiver and this cable. Besides that, it enables the PLC to communicate with other devices and hosts that also use the ethernet communication interface.

IC693CMM321

The IC693CMM321 is a single-width GE Fanuc Ethernet interface module from the 90-30 series used with PLC modules. It comes with 16 server connections and can support up to 3 communication ports and 4 LED indicators. This EtherNet Interface module supports client and service device operations, and comes with accessories such as an AAUI cable and a transceiver.

IC693CMM311

The Ge Fanuc IC693CMM311 communication module is part of the 90-30 Series. It provides CCM, RTU and SNP connectivity to the controllers that house this coprocessor unit. It is a single-slot module housed in any slot but the CPU baseplate and has 4 CCM modules. This communication module consumes 400 mA at 5 Volts DC and has a 5VDC bus voltage.

IC693CMM304

The IC693CMM304 is an Alspa N-80 communication module made for the N80 global data-sharing application and is featured in GE 90-30 PLC series. It is specifically designed for global data sharing for the C80-35 PLCs Alspa series. This module can share high-speed data over a network using N-80 global data. It can be mounted in a single-slot PLC 90-30 rack. It draws 1.3 amperes at 5 VDC.

IC693CMM302

The IC693CMM302 is an Emerson Automation's  Genius communication module previously released by Ge Fanuc. It is available on the PLC 90-30 platform. It provides the genius communication protocol, which allows for communication with up to 31 devices and a maximum of 62 devices per controller. This unit consumes 300 mA of internal power at 5 volts of DC.

IC693CMM301

The IC693CMM301 is a brilliant communication module designed to work with the PLC-90-30 product line. It supports global data types with a data rate of 256 bits for PLC genius communication. The unit has two LED indicators (OK/COM) and an operating temperature range of 32 to 140 ℉.

IC693CHS399

The IC693CHS399 is a PLC 90-30 remote baseplate that can connect to other baseplates in an extended PLC system and supports 5 I/O modules. This remote baseplate communicates with the PLCs via a 700-foot cable. It has the same size and power supply requirements as GE expansion baseplates. It has one CPU, five slots, and a 25-Pin Female D-Type expansion connector.

IC693CHS398

The IC693CHS398 is Emerson Automation's 5-slot expansion baseplate module, initially manufactured by Ge Fanuc. It is part of the programmable logic controller 90-30 product range. The main features include five input/output slots, one expansion port, and power supply slots. In addition, it is compatible with CPU 331, 340, 341, 350, and higher models and has an internal power consumption range of 170 mA at 5 Volts DC.

IC693CHS397

The IC693CHS397 is an Emerson Automation's 5-slot CPU baseplate module, part of the 90-30 Series, and it was formerly manufactured and released by Ge Fanuc Automation. The main components of this baseplate include 4 I/O slots, one power supply slot, a CPU slot, and an expansion port. This baseplate supports the installation of I/O and specialty modules and can be panel-mounted. Its current draw is 270 milliamps @ 5 VDC.

IC693CHS393

The IC693CHS393 is a 10-slot remote I/O baseplate from the 90-30 PLC platform, used to execute distributed input/output architecture, enabling 90-30 modules to cover longer expansion distance compared to baseplates. It can draw 460 mA @ 5 Volts DC and features a 25-pin D-shell female connector expansion slot and a 25-Pin Female Type-D Connector connector.

IC693CHS392

The IC693CHS392 is a 10-slot expansion baseplate, originally a GE Fanuc product, but it is currently an Emerson Automation. It is part of the 90-30 series and is used to provide interconnection among the baseplates, minimizing the load on the central controller while enhancing the performance of I/O points. Its backplane current draw is 150 mA @ 5 Volts DC and is suitable for use in indoor settings.

IC693CBL333

The IC693CBL333 is a connection cable used to connect PLC-90-30 products by GE Fanuc. It's an I/O cable that links the terminal block of the PLC device to the 32-point I/O units with dual 24-pin connectors. This 0.5 meters cable is made of industrial PTE material. It has a right-angle connector that links to the PLC system, which can also replace the old straight connection cables, which are now obsolete.

IC693CBL334

The IC693CBL334 is a PLC 90-30 connecting cable. It is a 0.5 meter cable with a right-angle connector. It is used to connect PLC devices. This cable replaces the obsolete straight connector. It is manufactured by Ge Fanuc. It also enables secure and high-speed communication between PLCs and field devices and is backward compatible with Series 90-30 IC 693 and IC 694 modules.
Previous 1 2 3

...

4 Next

Displaying 50 of 160 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP