GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Emerson - GE Fanuc

Series 90-30

GE Automation introduced the Ge Fanuc 90-30 series of programmable logic controllers. Emerson Automation currently owns the former Ge Automation. This product line provides industrial components that can be used in various applications. For example, its analog modules are used in the processes such as flow, temperature, and pressure. Similarly, the baseplates are offered in either 5 or 10 slot widths to accommodate the industrial needs of users for flexible configuration. Users can choose from a wide range of expansion and remote base plates for multi-rack systems. Likewise, it offers CPU modules for general purpose applications; these are appropriate for low I/O counts and embedded in the baseplates to improve slot availability. In addition, the 90-30 product family includes discrete I/O modules that serve as interfaces between the PLC and external input devices such as proximity sensors, pushbuttons, switches, and BCD thumbwheels, among others. Furthermore, the series includes motion control units that can be easily applied in various digital, analog, and stepper motion applications for high-speed counting; these units are also suitable for point-to-point applications. It provides power supply modules, which users can snap in similarly to I/O devices and are compatible with CPUs. Most of these power supply units have default auto-ranging functionalities, so users do not need to use external jumpers for incoming power levels. These can also provide current limiting features to enhance the control systems' safety. The manufacturers test these components to meet international industrial standards and last longer mechanical lifespans. However, users should follow the manufacturer's guidelines for mounting and troubleshooting.

Series 90-30 Selection Guide

The Series 90-30 PLCs from GE Fanuc are a collection of controllers, input/output systems, and specialty modules. This family meets the demand for extremely flexible industrial automation. Automation integration is made simple by the diversity and flexibility of input/output and specialty modules.

The Series 90-30 PLCs, with their novel architecture and modular design, provide a low-cost solution to a surprisingly wide variety of PLC applications, from simple relay replacement to complicated industrial processes and discrete automation.

This family offers 14 robust processors, 100+ distinct I/O module types, intelligent modules, high-level communications solutions, and bus interfaces.

This article will discuss the Series 90-30 series of products in detail. That will help you choose the best CPU and other modules per your system requirements.

Series 90-30 CPUs

The CPU is the main part of any PLC system. The Series 90-30 product line offers 14 CPU models with different features. It allows you to choose the best processing unit according to your system design. These CPU models are categorized into the following categories.

Embedded CPUs

These CPUs are soldered to the baseplate backplane. This family offers three embedded CPUs models: CPU311, CPU313, and CPU323.

The basic features of these CPUs include:

  • They are irreplaceable as they are soldered to the baseplate's backplane board.
  • These CPUs do not permit the usage of Expansion or Remote racks. This implies that if your application needs more than ten modules, you must choose a modular CPU.
  • All slots on the baseplates are useable for input/output or option modules.
  • In these CPUs, power supply modules also contain the memory backup battery. Unplugging the power supply will also disconnect the battery from the memory circuits on the backplane circuit board. However, the supercapacitor in the backplane circuit may retain adequate power to keep the memory circuits operational for a limited amount of time.
  • They don't contain a TOD (time-of-day) clock.

Modular CPUs

The processor, storage unit, and other integrated circuit chips are soldered onto the circuit board in modular CPUs. This board is installed in a plug-in module. This family includes the CPU331 and above models. The CPU350-370 are high-performance CPUs that offer additional features, fast processing speed, and increased memory.

The basic features of these CPUs include:

  • Only a CPU module or a specific optional module can be inserted in slot 1 of the baseplate in these CPUs.
  • These CPUs support expansion and remote baseplates.
  • This CPU can be easily swapped or upgraded to a new type.
  • Only one CPU is permitted in any system.
  • They offer a TOD (time-of-day) clock.
  • CPU350-370 supports floating-point math. These CPUs come with flash memory, key switch, and sequential event recorder.

General Features of CPUs

Some of the general features of embedded and modular CPUs models are discussed in this section.

Microprocessor

The CPU model determines the microprocessor type as shown below.

  • Microprocessor: 80188
    • CPU Model: CPU311, CPU313, CPU323, CPU331
  • Microprocessor: 80C188XL
    • CPU Model: CPU340, CPU341
  • Microprocessor: 80386EX
    • CPU Model: CPU350-364
  • Microprocessor: 586
    • CPU Model: CPU374

Built-in Serial Ports and Communications

All Series 90-30 CPUs, except for the CPU374, have one built-in serial port that is RS-485 compatible. Series 90 slave protocols, such as SNP and SNP-X, are supported by this port. This serial port in CPUs 331-364 can also support the PCM module for RTU master and CMM module for SNP master protocol, SNPX master protocol, CCM protocol, or RTU slave protocol.

CPU351, CPU352, and CPU363 come with two additional serial ports. The top port (port 1) has a 6-pin RJ-11 female connector that supports the RS-232 protocol, and the bottom port (port 2) is RS-485 compatible.

These additional serial port connectors are located on the front of the CPU. These serial ports improve the system performance by avoiding the CPU connection with serial ports through the PLC backplane. These CPUs allow you to create custom serial output. These ports can support SNP /SNP-X master and slave protocols. These also support the RTU slave protocol and the serial feature.

Memory

All CPUs from this series support CMOS RAM as working memory. CMOS RAM is a low-power, fast memory that is easily readable and writeable. In a modular CPU, a RAM chip is installed within the CPU module. In an embedded CPU, the backplane board has the RAM chip.

These CPUs support three types of PROM (Programmable Read-Only Memory) devices, including EPROM, EEPROM, and flash memory to store user data and CPU firmware.

  • CPU Model: CPU311, CPU313, CPU323, CPU331
    • Memory Storage: RAM and optional EEPROM or EEPROM
  • CPU Model: CPU340
    • Memory Storage: RAM and optional Flash
  • CPU Model: CPU 341
    • Memory Storage: RAM and optional EEPROM or EEPROM; RAM and optional Flash
  • CPU Model: CPU350, CPU351, CPU352, CPU360, CPU363, CPU364, CPU374
    • Memory Storage: RAM and Flash

Some general features of Series 90-30 CPUs include the speed (MHz), the number of input/output (I/O) points, the option of a battery-backed clock, the maximum user Logic memory, and much more.

Electrical Specifications

The electrical specifications of all CPU models include:

  • CPU Model CPU311 has an operating voltage rated at +5 volts DC and an operating current rated at 410 milliamperes.
  • CPU Models CPU313 and CPU323 have an operating voltage rated at +5 volts DC and an operating current rated at 430 milliamperes.
  • CPU Model CPU331 has an operating voltage rated at +5 volts DC and an operating current rated at 350 milliamperes.
  • CPU Models CPU340 and CPU341 have an operating voltage rated at +5 volts DC and an operating current rated at 490 milliamperes.
  • CPU Models CPU311 and CPU360 have an operating voltage rated at +5 volts DC and an operating current rated at 670 milliamperes.
  • CPU Models CPU351, CPU352, and CPU363 have an operating voltage rated at +5 volts DC and an operating current rated at 890 milliamperes.
  • CPU Model CPU364 has an operating voltage rated at +5 volts DC and an operating current rated at 1.51 amperes.
  • CPU Model CPU374 has an operating voltage rated at +5 volts DC and an operating current rated at 7.4 Watts.

Communication Options

The Series 90-30 product line supports several communication protocols, including Ethernet, Series 90 Protocol (SNP), CCM, Genius, and RTU.

Baseplates

The baseplate holds most of the components. The PLC system is built around these baseplates. Every PLC system includes at least one baseplate, which commonly houses the CPU. Depending on the number of modules they can carry, these baseplates are categorized as either 5-slot baseplates or 10-slot baseplates.

  • CPU Model: CPU311 and CPU313
    • Baseplate Description: 5-slotbaseplate with an embedded CPU
  • CPU Model: CPU323
    • Baseplate Description: 10-slot baseplate with an embedded CPU
  • CPU Model: CPU331, CPU340, and CPU341
    • Baseplate Description: 5 baseplates per system -> 1 CPU baseplate and 4 expansion plus remote baseplates
  • CPU Model: CPU350, CPU351, CPU352, CPU360, CPU363, CPU364, and CPU374
    • Baseplate Description: 8 baseplates per system -> 1 CPU baseplate and 7 expansion plus remote baseplates

Power Supplies

Each base plate requires its power source. The power supply is always installed in the left-most slot on a baseplate. A range of power supply types is available to fulfill the power needs of the series 90-30 PLC system. Power supplies that are compatible with Series 90-30 products include an AC/DC input power supply and a DC input-only power supply. These power supplies are equipped with LED (light-emitting diode) indicators. The purpose of these LED indicators is listed below.

  • LED Label: PWR
    • Description: Top green LED
    • Purpose: Indicates the operating state of the power supply. When ON, there is a correct source of power to the power supply. When OFF, power is not being applied and there could be a power supply fault.
  • LED Label: OK
    • Description: Green LED
    • Purpose: Indicates whether the PLC is operating properly or not. When ON, the PLC is working properly. When OFF, there has been a problem detected by the PLC.
  • LED Label: RUN
    • Description: Green LED
    • Purpose: When ON, the PLC is in run mode
  • LED Label: BATT
    • Description: Bottom Red LED
    • Purpose: When ONm the memory backup battery voltage is insufficient to keep the memory alive in the event of a power outage.

Input/Output Modules

The Series 90-30 product line offers the following input/output modules and specialty modules.

Discrete Input Modules

The Series 90-30 line of products offer discrete input modules that translate the user devices' AC/DC power levels to PLC logic levels. An optical coupler isolates the incoming power from the logic circuit. These input modules come with 8, 16, or 32 points (circuits), such as the IC693MDL230, which is a 120 volts AC discrete input module with 8 points.

Discrete Output Modules

The Series 90-30 series of products offer discrete output modules that transform the PLC logic levels into the AC/DC power levels needed to operate the user devices. Each output point is switched using a power semiconductor or an electromagnetic relay.

These discrete output semiconductor-switched modules come with 5, 8, 12, 16, or 32 output circuits (points). This series offers relay output modules that have 8 or 16 normally open (NO) relay contact outputs.

Discrete Input/Output Combination Modules

Combination discrete I/O modules combine inputs and outputs in a single module. It can be an input/output combination of AC/relay or DC/relay. The IC693MAR590 and IC693MDR390 modules have 8 input points (AC or DC) and 8 output points (relay).

Analog Input Modules

Analog input modules perform the analog-to-digital conversion. These modules are available in four combinations:

  • 4-channel current module (IC693ALG221)
  • 4-channel voltage module (IC693ALG220)
  • High-density current input module with 16 channels (IC693ALG223)
  • High-density voltage input module with 16 channels (IC693ALG222)

Analog Output Modules

Analog input modules perform the digital-to-analog conversion. These modules are available in three combinations:

  • 2-channel current module (IC693ALG391)
  • 2-channel voltage module (IC693ALG390)
  • 8-channel high-density current/voltage input module (IC693ALG392)

Analog Combination Modules

These series combine the features of the analog input module and analog output module into a single module, known as an analog combination module. The IC693ALG442 module offers two D/A output channels and four A/D input channels.

Optional Modules

This series is compatible with a wide range of specialty modules. That equips you with the freedom to choose the optional modules following your system requirements.

Optional modules with their functions are summarized below.

  • Genius Communications Module - IC693CMM301 - Allows communication between Series 90-30 PLCs and other GE Fanuc PLCs
  • Enhanced Genius Communications Module - IC693CMM302 - Enables autonomous global data communications among a Series 90-30 PLCs and a maximum of 31 additional devices connected to a Genius bus
  • Genius Bus Controller - IC693BEM331 - Supports the interface between a genius I/O bus and Series 90-30 PLCs
  • FIP Bus Controller - IC693BEM340 - Supports the Series 90-30 PLCs interface with FIP I/O serial bus
  •  FIP Remote I/O Scanner - IC693BEM330 - Supports the Series 90-30 PLCs interface with FIP I/O serial bus
  •  Motion Mate Axis Positioning Module - IC693APU301/302 - Combine PLC logic solving functions with one-axis control
  •  Motion Mate Digital Servo Module - IC693DSM302; IC693DSM314 - Combine PLC logic solving functions with two-axis control
  •  High-Speed Counter Module - IC693APU300 - High-speed processing of signals of 80KHz maximum
  •  I/O Link Interface Module - IC693BEM320 - Supports connection between Series 90-30 PLCs and Series 90-70 PLCs, as well as Series 90-30 PLCs (slaves) and Fanuc I/O LINK
  •  I/O Link Master Module - IC693BEM321 - Supports connection between series 90-30 PLC (master) and a maximum of 16 slaves on Fanuc I/O LINK
  •  I/O Processor Module - IC693APU305 - Direct Processing of rapid pulse signals
  •  Ethernet Interface Module - IC693CMM321 - Support attachment of Ethernet LAN
  •  Programmable Coprocessor Module - IC693PCM300/301/311 - Allows communication with programming terminals, RTU master devices, printers, etc.
  •  Communications Control Module - IC693CMM311 - High-performance coprocessor for modular CPUs
  •  Temperature Control Module - IC693TCM302 - Supports temperature control of a maximum of 8 channels
  •  Power Transducer Module (PTM) - IC693PTM100 - Monitor voltages or measure power consumption

State Logic CPUs

The Series 90-30 product line offers five state logic CPUs that use Natural Language Processing technology. It helps to manage large applications by breaking them into smaller and manageable tasks and steps.

  • State Logic CPU: IC693CSE311 and IC693CSE313
    • Description: 5-slot baseplate with an embedded CPU
  • State Logic CPU: IC693CSE323
    • Description: 10-slot baseplate with an embedded CPU
  • State Logic CPU: IC693CSE331 and IC693CSE340
    • Description: single slot CPU module

Remarks

Follow these steps while designing your Series 90-30 PLC system:

  1. Make a detailed plan of your system.
  2. Determine the number and type of inputs and outputs.
  3. Select optional modules to meet your system requirements.
  4. Select a suitable CPU and baseplate that can accommodate the module selected above.
  5. Choose a power supply.

Browse our selection of Series 90-30 units

AutomationStop.com's online catalog offers one of the largest selections of preowned Series 90-30 units in the world.

IC695FTB001

The IC695FTB001 is an I/O terminal block found in the GE Fanuc PLC 90-30 platform. It is an active fiber interface device designed for industrial use and is compatible with PLCs and PACMotion RX3i systems. It has numerous inputs and outputs that can greatly expand the system's capabilities. It has a power range of 19.2 to 28.8 volts DC and a current rating of 0.45 amps at 24 volts.

IC693PWR332

The IC693PWR332 is a power supply module with 30 Watts load capacity, and it is part of the PLC 90-30 product line. It is 12 Volts DC rated modules, with an input voltage range of 9.6 to 15 VDC. Its input power in the peak performance mode is up to 50W and has +5 VDC /30W, +24 Volts DC isolated/ 20W, and +24 Volts DC relay/15 Watts output capacity. Its inrush current rating is a 4 amperes peak with a maximum of 100 ms. This unit can use the RS-485 serial port for communication.

IC693TCM302

This IC693TCM302 is a controller for the temperature with 8 I/O channels. It is part of GE Automation's standard PLC 90-30 series. The module works at 5 volts and draws at 150 mA. Its output voltage range is 18 to 30 Volts DC. The required external power range of the unit is 18 to 36 Volts DC (2.5 Amps inrush). The total load current is 100 mA, and its overload threshold current rating is 700 mA typical, 2 milliseconds minimum.

IC693PWR330

Ge Fanuc's IC693PWR330 is a high-capacity power supply module that belongs to the 90-30 series. It comes with three outputs and can support up to 6 connection terminals. In addition, this unit is also compatible with the RS-485 interface used for communication. Its AC input voltage range is 85-264, while its DC voltage range is 100-300. This power supply module's nominal rated voltage range is 120 to 240 Volts AC / 125 Volts DC.

IC693PWR331

Ge Fanuc’s IC693PWR331 is a product type of a power supply unit with high capacity, and it is part of the 90-30 platform. It has a maximum load capacity of 50 Watts and has three outputs. The module has a nominal rated voltage of 24 to 48 Volts DC, and it supports the RS485 interface, compliant with UL and CE standards.

IC693PWR324

The IC693PWR324 is a power supply device. It is part of the PLC 90-30 series. Ge Automation designs this unit. It has an auto-ranging functionality to fit various incoming power levels and a current limit function that can directly shut down the power supply if a fault occurs, preventing further damage to the hardware. It has three outputs, a 5 VDC output, a 24 VDC relay power output that powers the circuit, and an isolated 24 VDC output to provide external power for input modules.

IC693PWR325

The IC693PWR325 is an input power supply module part of the PLC 90-30 series. The module has 30 Watts rated load capacity and operates on 24-48 Volts DC and 0.8 amps output current. It has a 4 amps peak inrush current rating at 100 ms (max) and is supplied with a 1.45 amp-hour battery. This module meets the CE and UL standards.

IC693PWR328

The IC693PWR328 is a power supply device made by Ge Fanuc Automation. This unit is compatible with the PLC 90-30 platform and is a 30 Watts rated load capacity unit. It is a 48 Volts DC input power supply unit. Its output voltage range is 24 Volts DC, and the module has 24 Volts DC with 15 Watts relay voltage. It uses RS 485 for communication and can meet high demanding industrial applications.

IC693PWR321

The IC693PWR321 is a GE Fanuc’s standard power supply module that comes from the product range of 90-30. It provides processing support to the compatible PLC modules. Users can install this device from the baseplate’s leftmost slot. This standard power supply module supports the RS-485 communication interface and has three outputs. Its AC voltage range is 85 to 264, and its DC voltage range is 100 to 300. The output voltage range of this unit is 5 to 24 VDC.

IC693PWR322

The part number IC693PWR322 is a product type of a standard power supply unit manufactured by GE Fanuc. This unit belongs to the PLC 90-30 series. This is a 30 Watts power unit with three outputs with a voltage of 5 VDC, 24 VDC relay, and 24 VDC isolated. Its input voltage range is 24 to 48 Volts DC. It also supports the RS-485 protocol for communication and includes LED indicators such as PWR, OK, RUN, and BATT.

IC693PTM101

 Emerson Automation IC693PTM101 power transducer module, featured in the PLC 90-30 platform. This unit's backplane power consumption range is 400mA at 5 Volts. It can be mounted to any baseplate in the 90-30 series, is compatible with all CPUs, and has a maximum power dissipation of 4 Watts. Its main application monitors voltages between the generator and the power grid or evaluates electrical power consumption.

IC693PIF300

The IC693PIF300 is a PC interface card, a PLC 90-30 unit developed by GE Fanuc's intelligent platform. This PCIF has a power supply voltage rating of 5 VDC, which can be supplied directly from the computer. It supports ISA Bus, PC or AT network protocols, and GE Fanuc female-D 25-pin expansion connectors. This unit is also compatible with the expansion racks and remote I/O racks.

IC693PRG300

Ge Fanuc's IC693PRG300 is a handheld programming device that belongs to the PLC 90-30 product line. It monitors logical operations and helps in debugging and configuration of the application programs. It comes with 15 pins type D connector to help mount it to any CPU using a serial port. Other features include 42 keys, 2 line / 16 characters display, expandable memory, and a tactile feedback option.

IC693PCM311

The Ge Fanuc IC693PCM311 is a programmable co-processor module featured in PLC 90-30 Bulletin. It supports Modbus RTU and GE Fanuc CCM and comes with a lithium battery with 640K backup RAM. Additionally, this module includes two serial connection ports and three status LED indicators, and its MegaBasic memory is 90 K. This enables the users to connect peripheral devices such as industrial printers, barcode readers, personal computers, or programming interfaces to the PLC.

IC693PCM301

The IC693PCM301 is a PCM (programmable coprocessor module) from the Series 90-30. This unit primarily extends the host controller's processor capabilities. It can communicate with CRTs, bar code readers, scales, printers, ASCII devices, and various other devices via Modbus RTU and GE Fanuc CCM. The module includes a backup lithium battery and consumes 425 mA at a 5 VDC power supply.

IC693PBS201

The IC693PBS201 is a ProfiBus DP slave interface module by Emerson Automation, a part of the PLC 90-30. The main communication interface of the unit features a single RS232 service port and a ProfiBus slave port. This single-slot unit is mountable to any baseplate in the 90-30 modules. The power consumption of this slave interface module is 450mA @ 5 Volts DC. This unit can help implement distributed I/O infrastructure and the Profibus communication.

IC693PCM300

The IC693PCM300 is a high-performance microcomputer known as a programmable coprocessor module (PCM); it comes from the PLC-90-30 Series. This device uses a serial port to communicate with 90-30 modules in most applications. However, depending on their applications, users can adapt it as a communication coprocessor module (CCM) or ASCII/BASIC Module (ABM). It allows flexible installation and handy operation for most industrial applications.

IC693PBM200

Emerson Automation's IC693PBM200 Profibus master communication module is part of the PLC 90-30 platform. This single-slot module is used for optional communication, supports the Profibus protocol, and can be mounted in any 90-30 Baseplate. It also has 244 input data and 244 bytes of output data. It consumes 450 mA at 5 Volts DC power supply. 

IC693NIU004

Ge Fanuc's IC693NIU004 is a network interface module that belongs to the 90-30 Series. This unit's main function is to enable the formation of a remote IO terminal. Similarly, it can also handle up to 2048 discrete inputs, 2048 discrete outputs, 1268 analog input words, and 512 analog output words. In addition, it can also support protocols such as SNP and SNPX on power supply RS-485 ports.

IC693MDL940

The IC693MDL940 is a relay output module used to control actuating devices. It comes from the 90-30 series, designed by Ge Fanuc. This unit has two amps capacity and has 16 normally open (N.O) relay output channels divided into four groups. Each group can deal with four channels. This unit has a rated voltage range of 24 VDC, 120 to 240 VAC. It can operate on 5 to 30 VDC or 5 to 250 VAC at 50 to 60 Hertz.

IC693MDR390

The IC693MDR390 is a discrete combination I/O module from the programmable logic controllers (PLC) 90-30 series. Its rated voltage range is 24 Volts DC, and –30 to +32 volts D.C. is its input voltage range. It has eight 24 Volts DC input channels and eight normally open (N.O.) relay output circuits. It can draw 4 amperes max load per common and 2 amperes max load. This solid-state single slot I/O module can be installed on any I/O slots to 90-30 series baseplate.

IC693MDL931

The PLC 90-30 IC693MDL931 is a relay output module with an isolated relay. This module has eight isolated relay contacts, four of which are normally closed N.C. and four of which have a double throw. Its rated voltage is 24 Volts DC, 120-240 Volts AC, 50-60 Hertz, and its output voltage is 5-30 Volts DC, 5 to 250 Volts AC, 50/60 Hz. It can load up to 8 amps resistive maximum per output, ten mA ma load, and eight amps maximum in a single cycle.

IC693MDL930

The IC693MDL930 is Ge Fanuc’s relay output module from the 90-30 PLC series. It has 8 isolated relay outputs, 8 channels, and 4 amperes of output switching capacity. Its nominal output voltage range is 24 Volts DC; 120 / 240 Volts AC. This single-slot digital I/O module has 20 Cycles per minute switching capacity, 5 to 30 / 5 to 250 Volts AC operating voltage range.

IC693MDL916

The IC693MDL916 is a relay output module from PLC-90-30 platform. It features 16 output points, and its outputs are grouped into individually isolated channels. Evey relay contact has a peak current rating of 4 amperes and can operate from 5-125 VDC to 5-250 VAC. It uses 300 mA of backplane power from the 5VDC backplane. Its module width is single-slot and is compatible with IC694TBBx32 / IC694TBSx32 connectors.

IC693MDL760

The IC693MDL760 is a product type of output module for the PLC 90-30 line. The type of this unit is a solenoid valve. It has five sourcing outputs rated at 24 volts and 11 pneumatic outputs. Each pneumatic output is equipped with an output fitting on the module's front panel. Its peak current draw is 75 milliamps with 100 PSI peak supply pressure.

IC693MDL752

The IC693MDL752 is Emerson Automation's discrete output module which was formerly released by Ge Fanuc. It is part of the PLC 90-30 Series. This unit has 16 input channels, divided into two groups. Each channel can deliver 10.2 to 28.8 Volts DC output voltage range 12-24 Volts DC mode and 4.75 to 5.25 Volts DC in TTL mode.

IC693MDL753

Ge Fanuc’s IC693MDL753 is a positive logic discrete output module that belongs to the 90-30 product line. It has 32 channels divided into 4 groups, each channel having 8 channels with a 10.2 to 28.8 Volts DC output voltage range, and can draw 60 milliamps current rating. This high-density logic module provides signals to the output field devices, indicators, and others.

IC693MDL754

The IC693MDL754 is an ESCP positive logic output module that belongs to the PLC-90-30 line of products. It has 32 output points equally distributed into 2 groups of sixteen points each. It is a 12-24 VDC and 0.75 amperes rated unit. The module outputs are of the sourcing type, which means they supply current to the connected loads and switch loads on the positive side.

IC693MDL750

The IC693MDL750 module has 32 points of I/O. It's part of a GE Fanuc family of digital I/O modules designed to work with the Series 90-30 programmable logic controllers. It fits into a 90-30 PLC slot with a five or 10-slot baseplate. It also has LED indicators that show the status of the current activities.

IC693MDL741

The IC693MDL741 is a discrete output module compatible with GE Fanuc 90-30 PLCs. It features sixteen output channels which are organized into two groups. Each of its sixteen channels can load an output voltage range of 12 to 24 Volts DC at 0.5 amps per point and two amps per common. In addition, its current draw is 110 mA when all of its outputs are energized.

IC693MDL742

The IC693MDL742 is a positive logic output module from the PLC 90-30 platform, originally manufactured by Ge Fanuc (Currently released by Emerson Automation). It has 16 discrete output channels divided between two groups and can support the embedded electronic short circuit protection (ESCP). The main function of this unit is to provide positive logic wiring configurations. Each channel has an output voltage range of 12-24 Volts DC and an output current of 1.0 Amps per point and 4 Amps per group at 50°C and 3 Amperes per group at 60°C.

IC693MDL740

The IC693MDL740 is a Ge Fanuc’s positive logic output module and is part of the 90-30 PLC series. It has 16 output channels divided into two groups, with 0.5 amperes per channel and current per common range of 2 Amperes for ten milliseconds. Its nominal rated voltage is 12-24VDC, and it has an output voltage range of 12 to 24 volts DC (+20%, –15%).

IC693MDL734

The IC693MDL734 is a 6 point digital I/O module compatible with GE Fanuc 90-30 PLCs. This 125 VDC positive/negative logic 1 amp output digital I/O module. It has six independent output points, each with its common output terminal. It has a peak current draw rating of 90 milliamps and an isolation voltage of 1500 volts.

IC693MDL732

The IC693MDL732 is a positive logic I/O module part of the 90-30 PLCs. It has eight output points, with a maximum output current of 0.5 amps per point and a peak output current of 2 amps per common. It draws 50 mA when all outputs are turned on and is designed for a 5VDC input voltage range. 

IC693MDL733

The IC693MDL733 module is a 90-30 series I/O module (PLC). It is a 12 to 24-volt DC negative logic output module with a 0.5 amp rating for the 90-30 programmable logic controllers. It has eight output points in one group, each with its output terminal. The standard operating temperature of this module is 0 to 60 degrees Celsius.

IC693MDL730

Emerson Automation's IC693MDL730 is a PLC 90-30 discrete positive logic output module. It has 8 input channels organized into a single group, with an output voltage range of 12 to 24 Volts DC and an output current of 2 amps per point; 2 amps per fuse at 60 ° C.; and 4 amps per fuse at 50 ° C.

IC693MDL731

The IC693MDL731 is a Ge Automation's discrete output module that belongs to the PLC 90-30 series. This unit features the transistor output type while the polarity is rated as negative and has 8 points per common, and the connector type is a terminal block with 20 screws per module. The internal power is 55 mA at 5 VDC. The input voltage range is rated at 24 VDC, while the on-state voltage is 15 VDC (min). The component features an off-state voltage of 6 VDC maximum while the on-state current is 4.5 mA (min).

IC693MDL660

The IC693MDL660 is a discrete input module for +/- operations, a module from Ge 90-30 line of products. This unit has 32 channels grouped into four or eight channels. Each channel accepts an input voltage range of 24 volts DC (+10%, –20%) and an input current of 7.5 mA at the rated voltage. This unit can be used as a local output module component of the modular and compact series 90-30 controller.

IC693MDL655

The IC693MDL655 is a discrete input module known as a digital I/O module from Ge Fanuc’s 90-30 product line. It has 32 channels divided into four groups, with an input voltage range of 0-30 Volts DC, a current rating of 7 milliAmps per channel, and an input signal range of 0-30 VDC.

IC693MDL652

The IC693MDL652 module is a discrete input module that is PLC 90-30 platform compatible. The input voltage range is 0 to 60 VDC, and the input current is 4.2 milliamps. This is a 16-point input module with a response time of 1 ms on and one ms off, and 34 to 60 volts trigger voltage. It loads 80 mA at 5 VDC and up to 125 mA at 24 VDC isolated voltage.

IC693MDL653

The IC693MDL653 is a PLC 90-30 discrete output module with a logic output positive/negative (+/-). It has a 24 VDC power supply and 32 discrete input channels divided into four groups. This unit's input channels can accept 024VDC (+10% - 20%) and 7.5 milliamps input current rated voltage. Its high-density digital module enables flexible installation across PLC units.

IC693MDL654

The IC693MDL654 is an input module part of the 90-30 platform. Its 32 input channels are grouped in 2 of 8 channels and have a rated voltage range is 5 to 12 volts DC for its +/- logic. Additionally, it draws 3.0 mA at 5 Volts DC and 8.5 mA at 12 Volts DC. This unit is commonly used to facilitate positive inputs, receive current from input devices, and supply current to the common or negative power bus.

IC693MDL646

The IC693MDL646 is a 90-30 PLC discrete input module released by Emerson Automation (Ge Fanuc, formerly). It supports 16 input channels with 24 Volts DC and supports positive and negative wiring configurations. Its input voltage range is 0 to +30 Volts DC and its signal range. The module consumes 80 mA @ 5Volts DC; 125 mA @ 24 Volts DC. The major application of this unit is to provide support to the binary field devices such as pushbuttons, switches, and auxiliary contacts, to name a few.

IC693MDL648

The IC693MDL648 is a digital input module from the 90-30 series of programmable logic controllers. This item is a DC power unit with an input voltage range of 0 to 60 Volts DC. It contains 16 input points and a 4.2 mA input current rating. It has a trigger voltage range of 34 to 60 volts with a response time of 1 millisecond (on) and one millisecond (off).

IC693MDL645

The IC693MDL645 is a positive/ negative discrete input module designed by GE Fanuc and belongs to its 90-30 product line. It supports 16 input channels with 0 to 30 Volts DC as an input power voltage. The current input rating of this unit is 7 mA, and it supports only one input group. Additionally, it features 16 LED indicators (1 per channel). It is also supplied with a terminal block which comes with 20 screws.

IC693MDL641

The IC693MDL641 is an I/O module part of the GE PLC Series 90-30 product line. It is a discrete logic negative input module with 0-30 VDC input voltage, 24 VDC rated voltage, and 7 ms response time. This module is designed to serve as an interface between the PLC and external input devices such as buttons, sensors, and contractors.

IC693MDL643

The PLC 90-30 series' IC693MDL643 fast and positive input module comes with a terminal block fastened with 20 installation screws. It has an internal current of 80 mA at 5 VDC and 125 milliamps at 24 VDC. Each of the points on this module has a single LED indicator and has a response time of up to 7 milliseconds only.

IC693MDL640

The IC693MDL640 is an input module, part of the PLC 90-30 platform made by Ge Automation. It is a discrete logic input module with 24 Volts DC rated voltage and 0 to 30 Volts DC input voltage. This unit features 16 inputs and 16 LED indicators and offers 7 milliseconds response time. It can consume 15 to 20 Volts power and has an isolation voltage range of 1500 Volts RMS between the field and logic sides.

IC693MDL390

Emerson's IC693MDL390 is an output module, that is mainly used to control relay, motor starters, and other devices. It has five isolated output channels that can load 85 to 264 Volts AC at 47 to 63 Hz output voltage. The unit's nominal rated voltage is 120 to 240 volts AC, and it can draw 2.0 amps per point; 5 amps per module at 45 ° C., and 2 amps per module at 60 ° C. (output current rating).

IC693MDL630

The IC693MDL630 is a discrete I/O module for the PLC platform 90-30. This module has 8-point inputs and a (positive +) logic module with a 24 VDC voltage rating. This module is developed by Ge Fanuc Automation. In addition, it includes 8 discrete inputs driven by positive logic and six distinct types of I/O modules for the 90-30 PLCs, which are available as discrete or analog modules.

Previous

1 2 3

...

4 Next

Displaying 50 of 160 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP